Hats off to Old Yankee for the sponsorship, certainly making the install easier with high quality products.

7:45 I'm glad you switched to the drill. That Sharpie was never going to get through the frame.

@anthonycarty9433

2 жыл бұрын

Thanks for the information , that's why It takes me so long to make a hole for a bolt . Have a good weekend .

My dad always wanted a 29 RPU. The day after he died in 1986 I actually saw one on the road. I could not believe what I was seeing. Since then I've always wanted one to own and drive in his honor. I'll make it happen. Love this build.

@IronTrapGarage

2 жыл бұрын

Let’s hope you find one!

Nice to see moon checking the progress of his new wheels.

That kit looks killer! Old Yankee Speed co makes some nice stuff! Over the years I've made all my mounts by cutting them out of 2x3 rectangular tubing then shaping them which takes a bit of time. I may just pick up a set of the front mounts to get me a head quicker. I'm interested to see how the pedal kit works out! Thanks for showing these kits! Matt- Mojo Speed Shop and Lounge

Awesome kit. Love BOLT INS. Makes life easy for beginner and experienced Hot Rodders alike. Looks Bitchin' as usual. Congrats on the new building expansion. More room = More neat car stuff. Play safe.

A transfer punch makes locating those holes easy and accurate.

Morning Matt & Steve! The Old Yankee kit looks & works awesome! Shop truck will be done in no time! Be safe!! Happy Easter!!

Hi guys. Hope you’re enjoying your weekend. Loving the progress with that truck.🙂

Next to last time I tried something like that ,1963, I got fed up and threw everything out and built a whole new frame from stacked, butt welded 3" tubing and flame cut plate. Took all night. Next time I built one I bought a chop saw that really sped up the process and made a neater race car. Cheated with some CAE components.

This was a pretty good lesson in fitting an engine/transmission using that kit

Workshop truck looks amazing with its new heart!!

Very nice kit from old Yankee speed. Going to be a fun little truck.

Love the new wheel and tire combo, looks killer.

Like the way the video was shot different moves etc. make me feel I was there with you working with you ! also the truck is my dream truck to own

@IronTrapGarage

2 жыл бұрын

Thanks for watching!

Matt and crew- great job! Can't wait to see this thing hauling parts-really fast. Moon needs a raise, btw.

Looks great, really excited about this build! Bet that Little truck will scoot down the road with that flatty in her.

love that kit! need to get one and I don't even have a model A [yet]--P.S.,get some transfer punches, WAY more accurate than a sharpie!LOL

Shop truck coming together nicely! That engine mount kit is awesome! Keep moving forward!

Looks like you guys need a Drill Doctor 😂🤣

@IronTrapGarage

2 жыл бұрын

Lol I’ll say.

Awesome! You make it all look so easy….

Sweet ! That's a nice kit , it certainly made the job a lot easier ! I'm glad you included a shot of you rolling the truck out on bare rims with all of the other "plunder " piled into it . What a contrast to what you have it looking like now ! WOW ! Excellent job , & well done guys ! Kudos to Old Yankee Speed ! That is going to be an awesome shop truck ! Enjoy your "beverages of choice " gentlemen ! You earned them ! Outstanding !

@IronTrapGarage

2 жыл бұрын

Thanks Rob! It certainly has come a long way in a short time!

Looking great coming together

Good advice! Many various kits are good for DIY'rs & even professionals. Also, good marketing strategy!

Can't wait to see the first drive around the block.

@IronTrapGarage

2 жыл бұрын

We can’t wait!

A little Easter egg this morning! Thanks!

@IronTrapGarage

2 жыл бұрын

Thanks for watching!

Now that is a way cool mount kit, and with the engine and transmission in, she is really looking like an old hot rod truck should. Are you going to be adding on some fenders to her, at least on the bed so no rocks come flying up and hits you or the windshield? Crazy things like that happen, ya know? Dude, she is going to be so flippin cool, plus adding weatherd out Iron Trap Garage logos on each side will be double extra cool ! Well, that's a few ideas in my head, which isn't saying much, lol... 🙂😀 Allrightythen, here's to all of you guys, I want to wish you a Happy Easter and I hope that you have an excellent, amazing day.

@IronTrapGarage

2 жыл бұрын

No fenders planned on this one currently.

Pretty cool kit...looks like it saved you some valueable time.

GREAT VIDEO MATT!!!! I LOVE YOUR NEW SHOP TRUCK!!!! IT CAME OUT GREAT!!!! I LOVE OLD MODEL A, T & 32 FORD PARTS. SO MUCH FUN!!!! GREAT VIDEO & THANKS FOR SHARING!!!!

My dad had one of those chain pull hoists in his shop he also had a single post lift with a H shaped frame for old fords and the like it had special pieces that slid back and forth to grab the rear axles the front had a bracket that grabbed the cross member

Wow It's like Christmas all of the time at your garage 👍🤠👍

@IronTrapGarage

2 жыл бұрын

Haha yea man!

Great tips as usual Matt 😎👍

Wow man that looks really cool Its so nice I love it a v8 model A pick up truck with a super charger pretty neat. All antique period correct. Pretty rare too. Its so cool looking you just gotta love it. Mounts work fantastic. I love your videos thanks for showing everything.

Nice kit!

Matt, they make a punch set called follow-through punch. You put punch in the hole, and it marks center for you Harbor Freight here in missouri has them for $11.99 with them; you hole is always dead on

Great video. I'm anxious to see how you'll be addressing the steering box issue.

Outstanding episode. Great information !!!!

I'm going to be watching this build closely. I have a 29 rpu just about in the same shape. Enjoy

@IronTrapGarage

2 жыл бұрын

Thank for watching Chuck

I'll be waiting to see how your shop truck turns out! That will be definite driver!

Very nice Kit I’m going to be looking into one of those Kits

Guys , the way this was shot is AWESOME. The camera work , angles and zooms was perfect . The the detailed explanation of the process was spot on ... Reminds me of the early ITG videos. Love it!! Keep up the good work.

@IronTrapGarage

2 жыл бұрын

Thanks Greg! We’re working to get a dedicated camera guy to get better footage!

@gregl1824

2 жыл бұрын

@@IronTrapGarage this student nailed it. Had that feel like we were right there. I enjoy this type of style when it comes to the repairs and How-To videos and the way you and Mike film on the adventures.

Forgot to mention it in the last video but now you got a extended shop you now have empty walls to hang more shit on 👍👍

Hey Matt, I have been thinking about building exactly what your doing with this truck for some time now. I’m out in New Tripoli and that would just be perfect to bomb around in on the back roads here. Super basic and straight forward. I take my trash to a public dump every Saturday with my dog and some local dude shows up in a stock 28 or 9 roadster pick up once in a while. When I watched the Texas clean out video I thought what an awesome shop truck that would be. You fellas got it going on. Happy Easter

@IronTrapGarage

2 жыл бұрын

That’s exactly what we want to do!!

Moon is the Star of the Show !

WOW, with the engine in and the wheels on even at this point in the build the truck is lookin' bitchin'.. You guys are doing an incredible job brining this old jalopy back to life. It should be a really cool parts and lunch run head turner ride when it's finally road ready street legal finished.

@IronTrapGarage

2 жыл бұрын

Thanks Ronnie!

Nice to see "Moon" helping your team when he can!

Awesome Matt, bad to the bone truck!!

Great video and camera Moon looks exhausted after a full day

Wow I didn't know a kit was available. I struggled finding a 32 crossmember route that I could afford and it was a lot of work getting it to fit right. Also it isn't easy to unbolt like your kit. Nice work guys.

@IronTrapGarage

2 жыл бұрын

It really is a game changer!

Nice job

ITG and strong coffee, makes my day!

@IronTrapGarage

2 жыл бұрын

Thanks for watching!

Steering box is a pain - it must be moved over to the left into the frame rail for the column to miss the head. Much swearing was heard from my workshop before my own pickup was ready for the steering box. I swapped it for a '32 box which might have made things even worse I don't know

That's a pretty awesome old truck built from found pieces! I may have a tip on another horde for you

Hey Matt, great video guys...Ralph

Happy Easter, Happy Passover, And Happy Ramadan. NICE VIDEO. #STAYSAFE #PHILLYPHILLY 🇺🇸

Sharpie. The fabricator's friend. 😎 I do prefer these instructional videos. And you all are good at it too. 👍

@IronTrapGarage

2 жыл бұрын

Thanks for watching!

Excellent as usual will this also work for a open drive not sure the difference between them

Bolt in kits rock . But id put one down from the top of the rail too

What a dream job

Can you imagine a couple of kids doing this swap back in the day with hand tools and scrap metal in a shed?

@IronTrapGarage

2 жыл бұрын

Heck yea!

Sweet

That did look pretty easy.

Gonna be sweet!!!

Matt Just a quick piece of advice engine and trans mounting bolts go in from the top with the nut on the bottom, That way if it does loose a nut the bolt stays in but slack that way it gives you the chance to find just a nut to get it back home as the bolt and damper rubber are not lost also.

@IronTrapGarage

2 жыл бұрын

That is correct for most modern vehicles but is incorrect on early fords. The bolt is larger at the bolt head to fit in the rubber mount and then a cotter pin goes through the nut .. thus the castle nut. Hope that makes sense 👍

would it have been a good move to put spacers behind rear mount bracket to improve motor mount center to center problem ?

Camera work seems a bit different this week. I like it!! Nice work as always

@IronTrapGarage

2 жыл бұрын

We have a young guy from our local HS studying videography that comes to help occasionally and he filmed this one. He did a great job!

Remarkable kit. I'm assuming that with no blower the radiator and grill shell would stay in the stock position?

@IronTrapGarage

2 жыл бұрын

Correct. It still may work as is!

Not sure which project is my favorite, the 39 Forgotten Hot Rod or the Shop Truck. I would drive the wheels off of either one. Happy Easter to The Iron Trap crew.

@IronTrapGarage

2 жыл бұрын

Thanks for watching!

Dang! That really looks nice . But I do have a questions. With this kit will radiator and hood fit in right place ? Regards Lem

So depending on what flathead you’re using, I.e 8BA, 59A or what not, would the front mounts be placed in a different location ? I guess what I’m asking is if all the different flathead front truck style mounts are in the same location in relation to the transmission mount ?

How many inches is your 32 ford grill cut to accommodate the the frame rail and still be level with the model A cowl?

If you were doing a flathead swap, why wouldn’t you use that kit? It makes it pretty easy. I’ve got a small block ready for mine, or I’d be considering that for sure. Well done!

@IronTrapGarage

2 жыл бұрын

We agree!

What is the rear mount hole spread to match the transmission hole spread? I'm wondering if my transmission is correct to match the New Yankee mount. Looks cool

@IronTrapGarage

2 жыл бұрын

I believe they use the 40 ford style mount. I believe they have the measurements on their distributors website

Hello Matt, Thank you for the videos you put out, they are very helpful to me while building my first hot rod. Question: I am building a 29 A Tudor with a stock frame and a 46 flathead and S10 5 speed. Do you think it's necessary to box the frame? The flatty is stock. Thanks.

@IronTrapGarage

10 ай бұрын

Boxing will make it flex less. The Flathead v8 won’t cause much more flex than stock. All up to what you want to do but it isn’t necessary with a stock Flathead in my opinion.

We the viewers request a "CATCH YA LATER!" line of merch. . . :) lol

Like yankee parts most brands make it bolt on. I like the stuff garage made doable stuff I used bolt on equipment on a 39 Chevy clean easy fitment fast takes lots of guessing out of the job

@IronTrapGarage

2 жыл бұрын

We agree!

🤔🤔 This is the second type kit like this I've seen come out since I fabricated my own 2.5 years ago that I documented on the HAMB....right down to the crossmember reinforcements. Is it great minds think alike, or imitation is the most sincere form of flattery? I'm waiting for someone to come out with the column shift kit next....which I've documented on the HAMB as well....😊😉😁

Ralpf Malpf tribute Hot Rod? Bolts when you have a welder.... Come-on Man!😁

Kit made it looked so easy. Do you do any boxing of the frame rails? Model A chassis is fairly flimsy. This will be a cool shop truck, any old time signage for it. 🇦🇺🇦🇺👍👍

@IronTrapGarage

2 жыл бұрын

This truck won’t make that much power. Frame will hold up just fine.

I was waiting for the fan belt to catch fire

Question you painted the Tran bracket are you going to do the rest of the frame?

@IronTrapGarage

2 жыл бұрын

Yes. Drill holes and make changes to the frame before painting it. Still in the mock-up stage.

liked the camera work, who's the new guy?

@IronTrapGarage

2 жыл бұрын

A young guy from the local High School. He helps out occasionally and does a great job!

Wheres yer safety goggles.love your input and output onyour work.doing a great job informing us.i love the fact theres no reality show crap going on .just sharing good usefull knowledge.and a large amount of common sense,something lacking in society today.the simplicity of yesterdays autos is fantistic.your knowledge on old fords is amazing.ive got 2 to 6 going on at any time.keep up the great work

@IronTrapGarage

2 жыл бұрын

Thanks for watching Bob

Of course you have to install hydraulic brakes and tube shocks as well. And how much horsepower are you installing? I notice you didn't box the frame, so maybe it's not too many horses.

Great video guys. I'm doing mine using the kit over the winter on a 29 roadster with a 39 drivetrain. Only question is did you have to shorten the driveshaft and tube or is the kit spaced for that front to back? Thanks again.

@scottfagley8071

Жыл бұрын

Oh if it matters I'm running stock 29 tube and rear end

@IronTrapGarage

Жыл бұрын

You will likely have to shorten the torque tube and driveshaft. We did a video showing that on this truck

Just being funny Steve. Have a great day

عمل جميل جدا جدا وعاشت اليدي موفقين ❤

Maybe my standards are too high, But that crossmember seems very cheesy to me. The biggest thing I don't like about it is just how much over slotted the biscuit mount holes are not to mention the fact that where your trans mount falls already has you extended all the way forward of the slot. Also if you just mount those (Hurst copy) motor mounts with the stock shock bolt holes and a bolt in the center, After the car is driven several miles you will start to notice stress cracks in the side of the frame rails across the holes. The way to prevent this is to also bolt the motor mounts to the top of the frame rail and just add a filler 3/16 piece of flat stock to take up the gap between the top rail and the top of the motor mount. Vern tardel addresses this same issue in his book as he also sells these (Old Hurst copy) motor mounts and his price is better than Old Yankee. Truck is coming together well and looking good,

@IronTrapGarage

2 жыл бұрын

Always a better way to do something. We’re just showing a basic / affordable way to do it. No rules against modifying or adding to this kit. But it’s no doubt it’s a jumpstart on fabricating from scratch.

@davidball93

Жыл бұрын

The transmission mount crossmember material that’s included in the kit is thicker than the 11 gauge stock Model A crossmember by almost double. Bolt-on boxing plates of the same thickness are also included to increase the strength of the Model A crossmember. The couple hundred pounds pressure of the motor/trans on the transmission mount won't bend or break it. Also… been using these hurst style mounts on dozens of cars have never produced a single crack in the frame using the mounting they’re designed to use. Though I suppose if the frame was sub par or fatigued to it could. But that would be the frame, not mount that’s the issue.

Steve, that wasn't the sharpest bit in the toolbox.

Will you have to relocate the fuel pump?

@IronTrapGarage

2 жыл бұрын

Possibly. We’ll address that soon

What is Steve using on his hair? Wheel bearing grease?

@IronTrapGarage

2 жыл бұрын

Haha trade secret!

I think it would be rad if it were black with pin stripes

I have a 29 coupe , I see you have a 32 grill in your 29 Question : is that a stock height 32 grill and 32 radiator ??

@IronTrapGarage

2 жыл бұрын

Grill needs to be trimmed on sides. 32 grill is taller

@wingingittracy8508

2 жыл бұрын

​@@IronTrapGarage Are you using a stock height 32 radiator

So being a 1937 Flathead, would it be a 21 stud ?

@IronTrapGarage

2 жыл бұрын

Correct

Do you have a link for this kit? I appreciate the info!!

@Lanni_747

2 жыл бұрын

www.millworkshotrod.com/collections/old-yankee-speed-co

@oldyankeespeedco

2 жыл бұрын

www.millworkshotrod.com

@IronTrapGarage

2 жыл бұрын

Link is in the video description 👍

21:58 Rear mount doesn't look like it mounts up.

@IronTrapGarage

2 жыл бұрын

It’s a slotted hole. You move the rubber mounts forward and back in the slotted hole depending on which Flathead you’re using. This style Flathead you run the to the front of the slotted holes.

Super cool! It will be a bitchin truck!✊😁

"Super easy" being a relative term of course.

You will round off those torched square corners off ???

@IronTrapGarage

2 жыл бұрын

That’s finish work before paint.

@bigjarn

2 жыл бұрын

@@IronTrapGarage I hoped it might be .!

How about adding 3 - inches on the TRANS BRACKET- SO IT WILL BOLT UP TO THE TRANSMISSION MOUNT HOLES, AND WILL HAVE TO MOVE THE TWO FRONT MOTOR MOUTH TO LINE UP WITH THE ENGINE HOLES,THEN NO NEED TO CUT HOLES IN THE FIREWALL ( OR ADD SHIMS, BECAUSE YOUR TRANS BRACKET TO SHORT TO CONNECT TO TRANS,OR I COULD BE WRONG GUYS? GOOD LUCK !👍👍

@IronTrapGarage

2 жыл бұрын

It all lines up without cutting the firewall. Raising the engine up would then cause cutting of the firewall. The small modifications needed are the least of the “evils”.