Love this bike🔥

love the v twin!

great comparison, Did you feel any real gains in power and toque with the full system

well done

good video !

@cghg33

Жыл бұрын

Thanks!

Did you "blued" the exhaust manually? It doesn't seem natural, it looks good tho.

Hey, how tall are you, im considering buying an superduke, thanks!

amigo al ponerle el full sistem es necesario ponerle otro mapa ? o solo con que le ponga el eliminador de servo ?

@bcnrider5846

21 күн бұрын

en esta moto cuando compre el full sistem tienes que cambiar centralita y una valvula.

pulls up in a Ferrari to install parts on a KTM that's baller

I have the same system with the Factory Map. The bike will not start if it detects Turn Signals. Any advice on a work around?

@zingzong5

Жыл бұрын

Some forums say you can switch all blinkers with LED’s without resistors… this makes the bike think there isn’t any Other way is to get the “magic box” which essentially puts a delay on your power out of the ECU and the bike will start without power to the blinkers. Look up on the forums and you’ll find a way that best suits you

@sansari3

Жыл бұрын

@@zingzong5 I added Denali LEDs and it didn’t work. Had no luck with the delay relay method. I added a 100 ohm resistor to each turn signal and that did the trick. Even though the Denali LEDs already have resistors built into them since they didn’t hyper flash.

@zingzong5

Жыл бұрын

@@sansari3 You’re the first person then for the delay box to not work that I’ve ever heard of. I have LED’s with no resistors and my 21’ SDR hyper flashes and the Akra tune works fine. Are you located in the US? That might be the problem, if I’m not mistaken the European bikes come with different lights so if you live in that part of the world the blinkers might need a specific resistor

@sansari3

Жыл бұрын

@@zingzong5 Yes, here in the US we don’t get the LED turn signals that European models get. I had my local motorcycle shop do the work for the delay relay method. Before taking the bike to the dealership I thought I would try using the capacitor/resistor method and fortunately it worked. Super simple compared to the complex wiring of the relay method.

@zingzong5

Жыл бұрын

@@sansari3 yeah I’m in the US as well. So your bike works then? Why would you need a workaround?

Does it pop and crackle on overrun?

@BeginnerMoto

2 ай бұрын

If you have a duke and just want that, get a slip on (i have a racefit growler X) and the BT moto tune. I have those installed on my bike and it pops like crazy.