Nice review, from someone I trust. Thank you John!

@patrickzink2191

3 жыл бұрын

Problem is he keeps calling it an rtr when its actually a kit version with motor and esc that doesnt come in the rtr version

Nice bucklite Sir. So glad the neighbors didn't abandon the pup in the yard again. Thanks for all you do for this hobby, such as these vids. I know some put you off posting lately.

When you're 50 , and you hear the name John Holmes and video in the same sentence. I'm like well , not sure if I want to see that 🤔 🤣

@agoodballet

4 жыл бұрын

😂

@lax2dia101

4 жыл бұрын

He retired from “the industry “after getting addicted to rock....crawling 🤦‍♂️

@bluecollarjay2959

4 жыл бұрын

@@lax2dia101 🤣🤣

@asaparnell3063

4 жыл бұрын

He’s got the world’s longest screwdriver!

@nolanhauge

4 жыл бұрын

LAX2DIA don’t watch if your gonna hate on him

The RTR has been shown on a few other channels, and it looks awesome too, and has all the features the kit does. The RTR will be great for those who don't want to mess with building, and painting.

@lstruggy

4 жыл бұрын

I built the sc10.2 9 months ago only thing missing are electronics battery n charger atm gonna go w the rtr this time and I could swap them out for both rigs!

another awesome test video, seems super capable.

I just got mine. So far im a happy guy

Great advise.

love the videos. i miss COMO. lived there for 3 years.

Nice Man Great video

thats a gnarly pile of rocks!

If ya got big hands, well you know what they say about that.....(short pause) it’s gonna be hard to get these body clips out that’s what they say.. hahahaha you’re awesome John. Love your products and videos! Keep up all the greatness!!!!!! You are a great man in this hobby

That was awesome my brother I thought the element Enduro Sendero was the next rig but now I'm second-guessing

Awesome video as always 👍🏼 The gear lash is why I always stress people shimming where needed, pinion, trans, wherever. Thats why I wish they would just make a simple single speed transmission conversion, it just adds too much slack to the drivetrain.

SCX10iii is indeed a friend. i like your video ..😁😁🤗🤗🤗👍👍👍

Great video bro 👍

This Rig is impressing me more and more! IF possible, I'd love to be able to get one. At least get those AR45s for my Unimog!! Stay SAFE Bro! 😷 Carmine ✈🚂🚙

11:45 thank you! A Jeep with portals is ridiculous!

@KTMcaptain

Жыл бұрын

@TransCube I never said they didn’t. I said it’s ridiculous because it’s extremely rare. Just like a Jeep on tracks, yes they exist but doesn’t make it less ridiculous. . Stay in school, reading comprehension is a very important skill. No, reading KZread comments is not considered reading.

Was up Holmes! This was a firme review, Orale al rato...

Those bodies are laser cut. Very cool

Nice;) TGH Colorado

I thought you were going to be the special guest on the HD/SBG live stream releasing your new esc you hinted about before.

I won a SCX10 III kit back in November 2021. I still have to build it. I do have a Trailmaster Pro and a Mamba X set aside for it though. -Matt

I’m not too crazy about the transmission myself what kind of motor do you recommend that I’m about to drop the old 3gear transmission in

Order is in. This is getting some holmes love in it. I've waited long enough... now ... which motor? Brushed preferred

@sprather84

4 жыл бұрын

Revolver is ur best option to keep ur cg down

@laundrieshanging9077

4 жыл бұрын

I was lookin at their 550 expert. Middle road 550 around 12/15 turn is what i want. Gonna throw it in my umg 6x6 when the stock goes

the rtr is out now, but im awaiting the straight axle version, itll get rid of the gear noise and a few other factory issues by then, just got my HH PP Stubby 3300kv motor after 6 months, cant wait to test it in my new Savvy Bomber, and I cant wait to get my hands on your v3 servos to test it out vs the new triple 7 from Reefs in my new bomber

Sad 😢 no action figures today. Oh well this was good to. Haha!

Yep !! Billy Bob comes with the kit

High john wondering if you can help just bought a120amp ESC for my senton3s as you now the 100amp one that is stock bullets are 3.5mm but on the knew one are 5mm can I solder 5mm on to the 3.5mm or 5mm all the way through or vise versa thanks

Thanks for the video! How is the supply chain doing? Is it coming back? One more question, Capra - BR XL or Mamba Micro Crawler?

Está muy bonito el vídeo ❤️🕹️🚙❤️👍🏻 Saludos desde Perú 🇵🇪🤙🏻🕹️

Hey John, how would you say the new scx10 compares to a trx4? Are there any really noticeable differences, or are they pretty similar overall? Like torque twist, suspension loading, etc.

Mopar do/did a portal kit for jk wrangler so portals on a Jeep is quite realistic

axail is actually going to be releasing a straight axle for the 10.3 and are in the testing phase of it with it having so much lash I wonder how they will pull it off

Scale wise, those different size tires really top it off compared to the stock ones...I'd do the same

other than speed to bump myself over a ledge, it doesn't need to be faster than i walk tbh. 3s 25c does the job!

Another enjoyable video. Being English I enjoyed the Monty Python reference.....

@sprather84

4 жыл бұрын

Great name my friend 👍🏻💯

@seavee2000

4 жыл бұрын

@@sprather84 Yikes, my doppelganger! Run away!!!!!!!!!

@sprather84

4 жыл бұрын

@@seavee2000 LMAOOOO

Сool jeep✌️🔥💥

I like the review, it was 😎, I think I liked the little side jokes more, some of them were good ones...

550sport 10t and 10tooth pinion in my 10.3 moves rocks it has so much torque

Yep in kit

Right on with the Python reference

Yes billy-bob is included

My Capra has torque twist... not bad but noticeable compared to my trx6

Billy bob does I have a Capra I love it but this looks cool

Did those body clips gry hung up in tall vegetation? Could you do magnets? Cool rig but so over jeep bodies. Maybe a chassis kit in the future.

@MrQcozicar

4 жыл бұрын

I havent had that happen yet, I've got about 15 miles on mine so far

The excessive gear lash has to do with the lack of quality engineering in the transmission main shafts and gears. Either the holes in the gears are too large or the shafts are too small. It has been found that the tolerances with the mating of the gears to the shafts are very sloppy. This slop even has to do with the clicking under load that several have reported. Axial needs to address this issue because the issue is not minimal, it is very excessive play.

Pretty much all shocks work fine. it's how you assemble them. After building them from kits for over 30 years, I can say that without a doubt. Green slime and careful assembly go a LONG way.

Are those pretty hard to clean 🧼???

What kind of wheels are those? Really nice. Great vid!

@rpphobby

4 жыл бұрын

Gear Head RC 1.9" 12-Pack EZ-Loc Wheels: www.rpphobby.com/product_p/gea1014.htm

I’m selling my axial 10.3….. for the money it sucks….. my darn dig servo went out ! It’s a moth old and I haven’t even taken it rock crawling, just played with it in the yard! Moving on to redcat Everest gen 8 v2!

"maybe one day they will release a Unimog with these axles" i wish

John what crawlmaster sport would you recommend? I would like to try the 5 slots and was hoping for some wheel speed when needed but crawls well too. Any help would be greatly appreciated

@johnrobholmes

4 жыл бұрын

My motors Are robotics motors, but higher quality than whats normally done.

@johnrobholmes

4 жыл бұрын

12t is real nice.

@jerrodarndt4012

4 жыл бұрын

Thank you John I hope to place an order soon!

i plan to get one with spektrum 6100 rx. what motor and esc do you recommend ?. brushed is fine

@jeremyroberts4455

4 жыл бұрын

Ive got the spektrum dx5c and 6100 reciever. They r great for this rig. Im running a hw 1880 quick run has the program card with it. The tekin t series heavy duty 35t. It does great but honestly the holmes motors r probably a lil better quality.

@michaelrajca6043

4 жыл бұрын

@@jeremyroberts4455 yes i was thinking hw esc too and holmes pro crawler 13 turn. i plan to use dig and 2 speed also

@jeremyroberts4455

4 жыл бұрын

Ive got them also i just took it out today and it performed way better than i thought it would you cannot go wrong with this setup u can really dial in the drag breal and also reverse where theyre not so jerky. It handle like a dream

@jeremyroberts4455

4 жыл бұрын

I also recommend putting some liquid gravity in the front and rear bumpers and in the link pan it really plants it to the ground

Billy! Good times. Two times up.

would anyone know of the rc4wd bodies would fit on this ??

@SnarkyRC

Жыл бұрын

Of course. You can make anything fit.

RTR İS $499.99 im hopeing to get mine tomorrow in orange.

John Wicks thumbnail:) ?

More capabel without the heavy body ha ha!First ride my crawler bro break a portal gear in "five" parts!

Hey John.. I think it’s time to post a video of why most all products are out of stock. It might be self-explanatory I think you’re loyal fans and customers deserve one. Thanks

@karlvorndran2996

4 жыл бұрын

Delays in manufacturing and shipping from the corona virus. Its not just Holmes it is most companies around the world right now. When you have increased demand from everyone being home and less people able to work in different parts of the supply chain process, you are going to have delays.

👊🍻

Can you do a review of your scale "dolls" , nudge, wink ;)

is this Jack black?

@SnarkyRC

Жыл бұрын

Jack Black on a major diet maybe.

When will the standard puller pros be back In Stock?

I want a gladiator rc. Jeep truck

Do you or would you consider selling built rigs?

@KTMcaptain

4 жыл бұрын

They have nearly a kit through team garage hack. You need electronics, axles, and links iirc.

@lstruggy

4 жыл бұрын

I have a scx10.2 fully built brand new needs electronics n battery/charger only some upgrades ...

I enjoyed a great video let's be friends. 🤩🤩🤩🤩 우리 친구 해요.!!!~~^^

I had the most fun crawling yesterday. imgur.com/gallery/FcTI45K Im rocking out that crawlmaster pro 12t every thing fit into place, met some amazing people. The universe provides.

So why isn't the guy that built the truck do in the review

It’s LOSI plastic

Is it just me or is the new Axial SCX III a Vaterra in Axial clothing?

@PhiddyPford

4 жыл бұрын

Just you....not close

Those tires look so small

Looks like the yard could use a mow, haha

Who taped up those lights, a 5 year old?

@HolmesHobbies

8 ай бұрын

my 4 year old

4:17 Are we talking about Mr. Pastrami or the wide open mouth blonde blowup doll in your closet? 👀😂

@g59spencerlaska23

4 жыл бұрын

Yea he most likely got a blowdoll

Stop saying that it is a RTR it’s a Kit

@sprather84

4 жыл бұрын

Watch how you talk to Mr. Holmes 🤣😂🤣😂

@leetjohnson

4 жыл бұрын

They sell an RTR with everything but a battery for $499.

@gavinstanton9672

4 жыл бұрын

Yeah yeah I was just trying to joke around

@gavinstanton9672

4 жыл бұрын

RC Maverick yes

@sprather84

4 жыл бұрын

@@gavinstanton9672 me too 👍🏻😂🤣

Sorry but I'm not impressed with this truck. The trx4 sport is still my favorite

3haters. Lol

I said it before and I Will doit again,cannot force myself to like anything from axial ,looks like a cheap toy(still)and since the Trx-4 or 6 is out axial will be forever in the shadows ☝️