Sundown X-12s V.3 on Salt 4K (CHECK OUT MY RECENT VIDS FOR UDPATED VIDS AND MODS)
Автокөліктер мен көлік құралдары
3/31/23 UPDATE🔥: Jump to my latest vid here👀💪🏾🔥: • 🔥🔥Sundown still Pounds...
1/10/2022 UPDATE: bracing complete. check new demo here and see 👀 the difference 🔊🙉 • Sundown X-12s V.3 on S...
1/2/2022 Update: thanks for the comments and views. Im gonna work on bracing the box but the problem is since the the port was built on the bottom theres no way to secure the brace by simple drilling from top and bottom of box. Imma have remove both subs and acrylic and figure a way to drill the brace from inside as well. suggestions are helpful. stay tuned for more flex vids
Running Mechman 240A with XS Power 3400 in front and Cyber 6K in back. All 1/0 Guage with Big 3. 2 Sundown X-12 v.3 wired to 1-Ohm in ported box about 4.3 CF tuned to 32Hz on one Sundown SALT 4K. So far I clamped a max of 1850 Watts with burps between 27-33 Hz. Lowest voltage drops of about 12.0 V while engine running. Has more power to give with some more tweaks. Stay tuned
Upvote on reddit www.reddit.com/r/CarAV/commen...
Equipment:
- Sundown Audio X-12 V.3 Subs
- Sundown Audio Salt 4K Amp
- Limitless Limithium Cyber 6K battery (rear)
- XS Power AGM 3400 battery (under hood)
- Mechman 240A high output alternator
- All wires 1/0 GA OFC with Big-3
- SMD Analog volt meter for main AGM batt
- Sundown volt meter for Lithium batt
- NVX 500A dual batt isolator
- All ceramic ANL fuses: 250A alt to main batt, 300A main batt to isolator, 300A isolator to lithium, (2) 200A lithium to amp,
Box specs:
- 3/4" Birch with double baffle and steel rod center brace and a 3/4" Acrylic window
- Height 14.5", Width 39", Depth 23"
- Port 32"x2" tuned to 32Hz
Amp settings/tuning:
- Gain (multi-meter method) set to 63.25V before distortion
- Low pass lowest setting 35Hz
- Subsonic 24Hz
- Bassboost off
i dont own rights to the music
Пікірлер: 469
If you face the port of your box back and put 1 more ply of wood on top or put internal bracing in your box you will get way louder💯
Looks amazing but the box is flexing a lot and its slowly damaging and will break the subwoofers. Add another baffle
@yamariderAllen
2 жыл бұрын
That's what I was noticing 😬😪
@jaydenedgar4393
2 жыл бұрын
What is a baffle ?
@filibertofonseca8083
2 жыл бұрын
@@jaydenedgar4393 The panel of the box where the speaker mounts to is the baffle. Since that panel has big weakened by cutting a hole for the speaker it is best to double the thickness of wood to add strength. Doing so will strengthen the box resulting in better sound output and also prevent the baffle from flexing and potentially breaking the basket if the speaker.
@Chris-B-Bassin
2 жыл бұрын
Ya at least a double baffle flush mounted
@Chris-B-Bassin
2 жыл бұрын
Good looking setup 👌
Brace that box up bro you won’t be mad but clean set up 🦾🦾
@late221
2 жыл бұрын
Yeh hes losing a lot of db
@jerrywendling8090
2 жыл бұрын
Thats what i was thinking... like damn single layer baffle flexing.. so much money on everything else
@michaelporter9695
2 жыл бұрын
Yes, nice system, but that box needs both bracing and a baffle. Single layer isn't enough for that much power
Impressive system. Those Sundown subs are like pistons..
@nickolasvaughn667
2 жыл бұрын
Yeah they need reconed every month just like Pistons need replaced on dirt bikes
@herbyverstink
2 жыл бұрын
in fact.. almost every sub is indeed a piston
@nickolasvaughn667
2 жыл бұрын
@@superior3384 ya I want the new American bass Xmas over any thing or Orion HCCa
@ma88tc
2 жыл бұрын
@@superior3384 Soundown!
@WNCAINTLOUD
2 жыл бұрын
@@nickolasvaughn667 You must be a skarbage fan boy. Can't afford the real shit.
sick setup... box almost tearing itself apart though
@jahcousteauu_STAYinSHAPE
Жыл бұрын
Dammm
@viivcreations9161
Жыл бұрын
why does that box not have any braces?! id get a refund immediately
@jahcousteauu_STAYinSHAPE
Жыл бұрын
@@viivcreations9161 idk but this video made me go get mines… SunDown Audio x-12, now I’m on the hunt for an amp “SALT 4k” and an alternator “MechMan 350a” and the whole nine, electrical upgrades to power the setup “limitless lithium battery” dammmn this thing is getting expensive
Nice system 👍🏾 very clean . Them subs are beating hella hard!👊🏾
very nice, cant wait to check out new box build
Brace your box and reinforce it and you will have one hell of a nice little system and maybe add another battery or a cap bank to help boost your voltage up some...
Super Clean Setup 👌🏾 Great Job on Everything ...Keep Slapping
Nice setup simple n clean
man that setup is so clean
this is basically what i was gonna have as my setup till i totaled my sentra. now i got a pilot and im going straight to 2 x-18 v3s
Very nice setup!
Love those lows man sweet
Set up is very detailed great with information in description
what amp would you recommend to use if I only wanna run one of these subs? I’m trying to save a bit of money and what gauge wire? Any help would be appreciated!
I swear this is my favorite bass vid rght now… I gotta say #fav_violent_bass_vid Lol 😂 and no car windows were destroyed in this demo… #perfect
Loving it
Never seen so extreme baffle flex before 👁👄👁 (not hating or anything, it looks clean af!😍)
You should brace that box asap.... I see some bad things happening to them subs .. nice setup id hate to see a motor fall off one of them subs..
lol Gat Damn! Look at them Xv3's Dancin' in that box!!!!!!!!!
Damn very nice
Looks Good!
Real Nice!!💯
So so nice box ❤️ love my G this is passion 💎 my guy
@808Scenes
2 жыл бұрын
Yeah it came out nicer than i thought....i saw a similar one online but a local builder built this to my specs and came it out better for a fraction of the online one. 💪🏾
Love your setup....brace up your box before it breaks💯🤝🏼
@basssopancadas9347
2 жыл бұрын
kzread.info/dash/bejne/kYh7t818nLPFj9o.html
@charmchesson6399
5 ай бұрын
What song?
Looking at your amp gain is is barley up or is that just past half?
Not bad. Definitely gonna be needing a new box like ASAP
love the set up thats a lot of box flex my box use to flex like that and did not even last started to get separation
Awesome
Some really great equipment! I'm not sure it would be beneficial to brace the box you have vs building something larger and more stable for those subs though. That box looks legit for a less powerful setup but perhaps too small for the pressure these behemoths create. Even sundown recommends 5 CF box and thats just a starting point.....
@lord_kappa_pb1825
2 жыл бұрын
I'm only finding box specs that recs 2.5 cu ft, it's on down4sound and sundown too
@chunkiehunk5201
2 жыл бұрын
@@lord_kappa_pb1825 Correct, there are 2 subs. 2.5 per sub makes 5.
@lord_kappa_pb1825
2 жыл бұрын
@@chunkiehunk5201 oh, right right. Yeah that makes more sense now
@Bobcatspiritdude
2 жыл бұрын
Well maybe space was a factor, or maybe he likes the way That enclosure performs in That particular vehicle 🤔 👍
Never seen 🤯😍a system like this i love it cool 👌
How many feet all together of the 0 gauge did you end up using for this?
Haha! That box is bout to lose it ! That’s awesome man you would really gain a lot from another baffle or just a all new stronger box. That song does tear shit up though.
Damn 👀👀👀👀👀 that box ain't hold itself 😂😂😂😂
Badazz 👍
Shit getn dwn My-G and it's a clean setup, liked and sub'ed 👍🏾👍🏾💥💥
Killer set up . Might need to brace tge center of box between subs ! In the video it looks like the box is flexin a bit. Might be camera tho. Id love this set up for myself !
Beautiful subwoofers,bro. 😉👍
Hey you have big 3 wired up yeah? Do u have to fuse the alternator positive to battery positive? Is so, what fuse rating for 1/0 gauge wire???
Huge bass😎💪🏻💪🏻
Crazy, your box is flexing
@808Scenes
2 жыл бұрын
boxed fixed...check new vids
slapp'n!
I like the box style smart build that 👌🏻 I’d really think about getting a thicker built box and some good bracing mite damage the subs with that much flex 😂 like I said still a smart build 👍🏻
Need some power on mids and highs. How can you hear anything besides bass and rattling? Definitely needs some insulation and a brace bar for ceiling
Hey bro if you don’t mind me asking, how thick of a piece of plexiglass/ Lexan did you use there? It was taking a beating and holding up good. Does it rattle at all? Thanks ahead!!
@808Scenes
2 жыл бұрын
3/4" Acrylic same as the birch... 3/4" all around. Box glued and screwed. The acrylic was originally screwed and sealed with silicone but i removed it and instead of silicone i used a trimed sheet of cork to seal it. Makes for easy removal also. So far so good no rattle from box or acrylic. 💪🏾
Nice set up
It looked like woofers are moving around but slamming.👍👍
Nice set-up.
Box is nice, but can't handle them bad boys. I just ordered 2 of the Xv3 12's 💪
What impedance are those subs… are they 4ohm wired down to 1ohm?
I have a dodge nitro. What did you do too run that much amps.
What up Fam new friend to the channel. Your audio system is nice!!!!!!!!
Dayummmm
Them subs about to brake that box 😲
Wow that box flex lol
Your baffle is flexing so much you can see the motor moving. Good thing sundown baskets are as strong as they are.
@6wil0liam2
2 жыл бұрын
Shits banging tho
Great job. One question? Are you using an isolator between the XS AGM Battery & The Limitless?
@yhprumhsoj
2 жыл бұрын
You don't "need" too if you are running your vehicle on a regular basis. The agm or lead acid batteries will rest at a lower voltage than the lithium and draw it down over time so you have to stay on top of it if you are not running an isolator. Not a big deal though. Technically the lithium would be better without the agm but you lose a little bit extra reliability.
@62dobie
2 жыл бұрын
@@yhprumhsoj,thanks.
the whole car became the passive radiator 😂😂🤣🤣
Holy box flex batman.. you need bracing in there or that box will come apart
What set do you have is sick bro
Damn! They hit so hard it almost fixed the dent in your door.
Beautiful set-up but you should really add a brace inside the box and or add another baffle layer to the box. Those subs are flexing the baffle like crazy you are losing output and will damage subs like snapping the spokes in the baskets.
🤯🤯🤯
Thats the Boogie down boom box !! That sucker is slamming so low _ its almost underground man !!
Gah damn that box looking like she hanging on for dear life !
Dammit man!
Rip to that box nice build
Woah the subs are moving in the box.
First. Awesome build man. Very clean. I like it. But that box is WAAAAY too weak for those subs. Either the box is gonna snap, or your subs are gonna bust a basket. Badass subs tho man.
🔊👍🔥💪🙋♂️
Beatin
Brooo brace that box broke 2 baskets from baffle flex but system looks good man
Holy shit they're flexing the whole box lol
I’ve watched this video about 5 x times now… Shiit is SLAPPiN… what pioneer head unit? Pls
Acrylic gives the impression motors are moving lol
Turn the box around so the port wil face the rear with the box bout 3inches from the tailgate them lows will sound way louder.....ive did 3 builds on your same vehicle....
Change the box. How close to the bottom of your box to the magnet? Looks pretty close you might want more space under the sub this would help with cooling.
It sounds somewhat good, although it lacks a few wheels so that you look at the most perrona van. Good video...
Very nice and very clean setup, but you desperately need a double baffle and a center brace a.s.a.p!
That box flex is serious
@808Scenes
2 жыл бұрын
fixed...check new vids
Were you at slamology this year
That box is dying a slow and painful yet magnificent death 😆
Wicked setup but that box needs a brace in between those woofers. Also add some sound proofing to the roof and some other parts of the car.
Flexo 😮
put some bracing in that box, damn. them subs are dancing. great install though.
😍😍
What size alternator is that? I got 2 v3s on 3k apiece taramp. Mecman 370 2 xs 3400s,but thinking about going Lithium
@808Scenes
2 жыл бұрын
240a
That box is flexing hard to but those x's is getting down 👍
@808Scenes
2 жыл бұрын
🤙🏾...additional bracing in the works 🔊🙉
Top
I would get a bigger box. That box it way too small for those subs. Plus it would Hit so much harder. Other than that great set up man.
@allthingsaudio4610
4 ай бұрын
Yep. That box is not even big enough for just one of those subs. That box is wayyy too small.
Needs a pole in the box got some baffle flex that’s gonna be trouble someday
Nice work this lad wana do my car lol
That's a sick setup you got bro! How much all that cost you overall?
Bro you can brace it to the port, just get a 1in wooden dowel from hardware store and measure from face to port then inside the port to exterior wall and brace the port and then brace the face to the port and it will be solid and good to go!
@808Scenes
2 жыл бұрын
yeah i looked at it and imma have to use threaded rods with a threaded plate on top of the port from inside the box to secure that end....vs dowels i can screw it securely from top of baffle but the bottom of the dowel will be on top of the port and i cant fit a screw driver inside to screw it down and plus the port has a middle brace already also.
That box is bout to eat itself
@808Scenes
2 жыл бұрын
Lol yeah i had this customed made more for looks. I know sound is supposed to be heard not seen but coming in at 4.3 cubes with the 3/4" acrylic it still hits pretty hard. My next box is gonna be strictly high output...all birch maybe 6 cubes, triple baffle and reinforced like fort knox 💪🏾🔊🙉
Brace the itll help alotttttt but either way awesome set up
@808Scenes
2 жыл бұрын
Bracing coming soon 👍🏾
I have the same subs but i would love to know what your running battery and amp wise because mine are not hitting like that!!!
@808Scenes
Жыл бұрын
Everything in description 💪🏾
I just sold my 2 12xv2s 😞 new in box Zv6 is what i am going for
Nice set up though