Thank you! I tried to watch the instructional video that came with the sun cast but your instructions were much more clear.

@Jean78578

19 күн бұрын

Glad it helped!

Great job making this video! Who needs paper instructions anymore…

@Jean78578

Ай бұрын

Glad it was helpful!

I would not been able to put my Suncoast shed without your generosity for your video God Bless you .😅

@Jean78578

Ай бұрын

Glad to help! And, may God bless you too!

Thank you so much for sharing

@Jean78578

2 күн бұрын

Thanks for watching!

Great video. Thanks. Made my life easier. Don’t like to read instruction manuals. Very well explained

@Jean78578

Ай бұрын

It's a great shed. Glad the video helped!

Great video. Thank you

@Jean78578

6 күн бұрын

You are welcome!

Very helpful, thank you! My wife and I are assembling ours today Jan. 12 2024. With the help of this excellent tutorial it should be a snap.

@Jean78578

5 ай бұрын

Glad it was helpful!

This was the most helpful video. THANK YOU! Myshed didn't come with a manual, and I don't have a computer, so a video was the only way to go.

@Jean78578

7 ай бұрын

You're welcome!

This is so well explained and shown. Thank you so much I was not doing so hot with the roof hinges until this video.

@Jean78578

5 ай бұрын

You're welcome!

Thank you!!!

@Jean78578

2 ай бұрын

Welcome!

Very good video you did a great job explaining how to assemble it I am assembling mine tomorrow after work.

@Jean78578

2 ай бұрын

Glad it helped! I'm sure you will enjoy the shed.

@faronmastin8683

2 ай бұрын

@@Jean78578 Got it done piece of cake.

@Jean78578

Ай бұрын

Awesome 😎

Love the Team work! 🎉

Great instructions! We just assembled a 4781 which is the same size but with gray walls and doors and black roof. The side bars also had some mismatched screw holes; and one was cut with notches on one end instead of a straight cut, didn't affect the function but just looks sloppy. Did your roof have the holes for the main hinges and front lid bar? Like you I preassembled the hinge/shock assemblies then installed on the walls, but with no screw holes on the plastic I was worried the hinges wouldn't line up correctly. I ended up taking the hinges off the walls then installed them and the front bar with the roof laying upside-down so I could hold the parts better.

@Jean78578

Ай бұрын

I don't believe it did..

Watching this ahead of shed delivery scheduled for 2/2/2024. Your presentation was great, and I expect to watch it again before assembly. Thanks! Much more helpful than Suncast's own assembly video! Based on some Amazon reviews, I wondered if it would be junk, but your assembly makes it look like all I could expect! My purchase seems to be one of the last in stock, so I can only hope it arrives in good condition.

@Jean78578

5 ай бұрын

Glad it was helpful!!

@user-mr7un7qf2j

2 ай бұрын

What is model number of shed​@@Jean78578

@Jean78578

2 ай бұрын

Model number: BMS4700X

THANK YOU!! SAVED ME A LOT OF TIME AND FRUSTRATION !!

@Jean78578

7 ай бұрын

Glad it helped!

hello, can you tell me if the lid can mounted to open in the other direction? so that we can set it for receive packages trough the lid and on the other side take the packages out trough the doors. thank you

@Jean78578

3 ай бұрын

I don't believe so. The hinges for the roof are on the back sides and one in the center.

GREAT job!!

@Jean78578

3 ай бұрын

Thank you!

Can I buy spare parts? Do you know the exact model so I can call suncast and get replacement hinges? Mine flew open in a wind storm and broke

@Jean78578

Ай бұрын

Ours is model BMS4700. You should be able to contact Suncast support for parts. Please see this link. When you contact them be sure to include your model and a photo. support.suncast.com/hc/en-us/articles/10198762858391-Looking-for-Replacement-Parts

Thank you for sharing

@Jean78578

2 ай бұрын

Welcome!

Is there a way to get rid of that black product window icon that's taking up half the screen?

@Jean78578

2 ай бұрын

There should be a tiny x in the top right corner to close it.

@binhvandu3175

2 ай бұрын

Thank you!! Great video!!

thanks so much!

@Jean78578

6 ай бұрын

Glad it helped!

I'm considering getting this to house my gas powered backup home generator. I plan on installing an intake vent and an exhaust fan. Generator weighs 230 pounds. Do you think the shed would work for this purpose? I'd like to disassemble the shed when not needed and assemble it when the power goes out. Practical? Thanks

@Jean78578

7 ай бұрын

Yes. I believe that would be awesome.

So I noticed you didn’t put the cc screws in the corner brackets closest to the center of corner holes? That would have probably made my assembly easier. I think pieces were warping some from sitting outside several days prior to being able to assemble and omg I couldn’t get the front bracket for roof to nest down close enough. So nothing wanted to line up correct and I am gonna have to try n fix that also don’t like the gap it left when installing the sides once you slide them backwards there is gap at floor near front I may add some flex seal tape on it. Thought about spray foam but I don’t know. I just got freaked out cause went to put together and had the floor sitting decided to add vapor barrier and picked it up and there was a snake under it I almost peed my pants! Video very helpful but I watched it and read manual and then re watched about the front bracket on roof. I did my roof way the manual says and no no no should have done it how you did. I did this all by myself! And I’m disabled it almost killed me holding the roof up trying to get things to line up couldn’t bend down to get screws ended up holding roof on my head even and then have broken shoulder and had to hold it up high using that arm cause it’s left and I’m right handed but my help never showed up just a lot of excuses. So I had no choice but to do it. All other pieces light weight had holes for easy carry. Sliding the sides in I had to just stand inside on the floor and use my leg to tap the bottom outside to slide it lol that worked. And for a lot of it I would just begin a cc screw to hold n place. But screwing in the corner first then adding brackets to back and sides was so bad. Just trying to decide how to line it up would I force screws anyway? Or not etc but my handle didn’t even line up with the lock hasp n the end I had to jiggle things around the doors even didn’t come together good I had to pull the handles together. Also the spots for hinge already knocked out I’m wondering if was a return. Thanks for the video tho hoping I can go back and make few slight changes and it will b ok. Hate to remove the front piece on roof completely I’m gonna try n take off re install but it’s too long wouldn’t allow for lid to close but again I think it’s cause pieces were just not lining up due to being in box outside getting super cold then rain then took out stood upright against fence couple days and notice the floor which sat flat entire time was warping upwards on the outer edges where sides go. It should adjust tho my Rubbermaid shed has been wrecked twice and doors warp failing to close and once you get it back right it seems fine over time. Prob same for this but I don’t want gaps in it or top not closing and it’s furthest thing toward back of my lot so critters are an issue. I have a bayou behind me. Considering the shelf possibly not sure. Have a lot to deck storage too may get matching shed to this or a second one of these this would be ok to take apart and move.

Wait… did you say “the uder side” ? I know that accent!

@Jean78578

Ай бұрын

Lol.

My gas shocks do not seem to want to budge. What do you think I’m doing wrong?

@Jean78578

8 ай бұрын

I don't believe they can be compressed by hand. They need the weight of the roof.