Hi, Fusion Solar. The video shows the connection of the smart power meter to the inverter. Where can I find setup instructions in the Fusion Solar program for limit generation to level load (zero power)?

Is it possible to put a 125 kVA Huawei inverter into the network and add an inverter from another company with 60 kW? There is no problem with that.

¿Se puede usar el inversor monofásico con el medidor trifasico? El servicio huawei en España no lo tiene muy claro.

I suffer a lot from the fuel prices in feeding the combined electricity during the day. Can I operate by myself without the need for a stream of generators that run on diesel fuel?

i have connected with the same wiring but my power meter is still offline what can be the reason ???

the ac power cable is not always that small and simple. It is mostly large size wires and multi-sets, what other CT compatible with DTSU power sensors?

@MaharAli

5 ай бұрын

DTSU666H comes with two types of CT's, 100A and 250A. Which means 2nd type of CTs can be connected with 210mm cable easily.

@SoLuna137

5 ай бұрын

DTSU666-H doesnt let you clip into a 2 sets of 250mm² Thankfully there is DTSU666-HW where you can use 3rd party power sensor that can accommodate even 800A power lines​@@MaharAli

I see in this video it is used one phase inverter, can I use on Smart Power meter and Three phase solar inverter SUN2000-5KTL-M1 ?

is it possible to get DTSU666 data into Home Assistant somnehow?

Is the inverter connected to only one phase? I understand that power is measured on all phases but it delivers energy only on one phase? I mean the AC output of the inverter which is connected only on the yellow phase.

@bugracangulmez

Жыл бұрын

İnverter is working with 1 phase and 1 neutral. However, 3 phases come from the power sources, thats why there is 3 limiter. Its called 3 phase on grid inverter.

Should i buy and install this sensor with SUN2000L-5KTL ? For what its necessary Can i use inverter SUN2000L-5KTL without sensors

@au91759

2 жыл бұрын

You can use the inverter without this meter. It's only needed if you want to control your power consumption or if want to have a Huawei battery system

POSSO COLLEGARE IL SERIALE A 90 MT ?

Is it possible using one battery grid for 2-3 HUAWEI SUN2000L-5KTL?

@HuaweiFusionSolar

6 жыл бұрын

Hi Pavel, do you mean to connect 2-3 pieces of Huawei SUN2000L inverter to just one battery module?

@paveldubovyk5900

6 жыл бұрын

Huawei FusionSolar yes, exactly. Also, parallel connection interested too. I mean 2-3 devices with parallel connection to distribute load with one battery.

@paveldubovyk5900

6 жыл бұрын

Huawei FusionSolar also I will be very grateful for manual where described battery installation, requirements and other relevant to sun2000l device as I have not found this manual yet

Hi, i’m from vietnam, where to buy it, please give me link buy DTSU666-H 250A, thanks you!

@HuaweiFusionSolar

4 жыл бұрын

Thanks for contecting, here's our Vietnamese website: solar.huawei.com/vn/HowToBuy

Hello! Where to buy in Spain? DTSU666-H

@pwrt_valencia

4 жыл бұрын

Hola Alejandro, compras de Solar Massel en Pedreguer 😊

@HuaweiFusionSolar

4 жыл бұрын

Thanks for asking, here you go~ solar.huawei.com/es/HowToBuy

@dekhzarahatk

4 жыл бұрын

@@HuaweiFusionSolar Why do we need DTSU666-H for zero export? When SUN2000-5-20KTL-M0 inverter already has zero export option? Please Guide.