Hi guys! Thanks for tuning in! This week we're going to keep going on the 1960 Chevy Impala I bought from Tom a couple of years ago... I have a Chevy Biscayne sedan for a donor, and it is time to see if we can save the Impala by grafting it to the bottom of the solid Biscayne! I did a 1960 Plymouth Fury a few years ago, so it'll be a similar job, overall... This week we'll finish prepping the 2 big pieces and try landing the top of the Impala on the bottom of the Biscayne... Thanks everyone who ordered a 1937 Chevy T-shirt; they're being printed now and I'll let everyone know when they are on the way! Hope you enjoyed the 8mm clips! I am filming more on the 8mm camera and I'll include the footage as soon as I get it developed... Special thanks to Steve Dean and Niagara Film Labs in Toronto. Thanks to everyone who subscribed to our channel here, and thanks also for all of your "likes" and comments! Please feel free to check out our Patreon page at : www.Patreon.com/coldwarmotors where we have extra videos and pictures and a bunch of people hanging out and bs-ing about cars! We have set up a Paypal Donations Page if you'd like to help out the cause here... Very much appreciated! Here is the link: www.paypal.com/donate/?hosted... Mailing address: 253, 22169 TWP 530 Ardrossan, Ab Canada T8E 2J1 #chevy #engine #rust #vintagecars #redneck #junkyard #bodyshop #impala #salvage #poodle #restoration #lowrider #coldwarmotors

Reminds me of when Bender met “god” in Futurama and god says “when you’ve done something right no one will be sure you’ve done anything at all..”

@jeremyhanna3852

3 күн бұрын

Same thing they say in oceans 11 when there getting ready to rob the casino

Gotta give you credit Scott. Most people wouldn't even think of giving this poor old Chevy a 2nd chance. They would just laugh and walk away.

Can’t wait for Tom to go for his first drive in the impala !

No matter how long or short, you keep your viewers so engaged that the time slips away.

Honestly this splice went better than the last one. Nice to see Al back on the show.

@tarstarkusz

10 күн бұрын

The Fury splice went perfectly.

1972 I had a wife and 2 kids so needed something. found a 60 chevy station wagon for 20 bucks. fixed it up and used it for 4 years. sold it for 200 bucks when it got to rusty. great car to drive in traffic. NO one tried to bully me for a lane. I am enjoying this restoration very much.

@patdesrosiers6423

6 күн бұрын

A 60 BelAir 4 door was the one I never should’ve sold. Best dash of any of my cars. I replaced the bad 283 with one from a buddy who had wrecked his truck and drove it around 4 years

I never noticed it before but when Tom starts swearing the trees DO start blowing back and forth! 🤣

This is the best part of my week.... Thanks!

Freakin amazing. Thanx to everyone that contributed

Scott, I have no words for the dedication you show in your craft. You and the other agents do an excellent job. I can't wait to see this project moving along.

A guy that lives in the condo next door came over for a beer yesterday and saw my CWM calendar. He watches each CWM video also. Guess what we talked about for the next two hours? Instant friendship! 🍻 and I LOVE the calendar. 👊

The Music, the Content, OH MY.

Opening band - FANTASTIC!

@coldwarmotors

11 күн бұрын

Hey thanks... Everyone remembers that one, haha... Cheers!

@dougcoxon5472

11 күн бұрын

Happy Sunday morning from the Great Southland. It’s 6.20 am and the Kookaburra’s are heralding the winter days sunrise. It’s a cool 15 degrees with a max 24 degree winters day here.

@chrisparsons7043

11 күн бұрын

This is so impressive, a great bunch of mates helps no end. Maybe you should splice the badges too Scott - 'Biscala' one side and 'Impane' on the other 😄

@user-mq4zg1rq7t

10 күн бұрын

Great opening with the band. Always nice to see good friends pitching in on a project. Glad to see “the Foreman” stop by to sign off on the work 😃. Cheers from Connecticut!!

@Nunofurdambiznez

10 күн бұрын

@@user-mq4zg1rq7t Tom is most definitely the greatest retired foreman around!

The splice is nice!

So nice to have buddies who will drop by to lend a hand. I miss those days.

Summer Splice Spectacular! let the sad bastard shit work show begin!

👍 to all that helped get the impala on its way back to life. I like watching the way you work the body hammer and dolly. Looking forward to seeing more. 😎✌️❤️👍. Cheers.

The gentleman that owes that beautiful Impala I photographed is seeing this. He wondered why you are doing this when you can get a restored one. I told him there wouldn't be any fun in that. I also told him you are a cheap bastard. 😂 Cheers!

@81cb750fss

10 күн бұрын

And it's proof that an appropriate buzz helps the imagination in considering possibilities, if you have the skill, shit... Go for it😂

@coldwarmotors

10 күн бұрын

Hi Heather! Well, I guess I would buy a restored one if I could find a nice one for 7500 bucks, which is what I'll have into this when it is finished, just like the Fury... Ask him what he wants for his? Haha cheers, and thanks as always for supporting and encouraging this nonsense! (PS I am definitely a cheap bastard; that's why I learned how to fix cars!)

@normanduke8855

9 күн бұрын

@@coldwarmotors You know, you live close to my idea of heaven. I bet 99% of the guys who watch this channel wish they could be you.

That accellerated quickly! It is a sure sign of a skilled crew when the lot of you could communicate so well in a form of short hand all could understand. That was amazing to watch!

SO happy to watch this transformation Scott! And how cool to have friends to pitch in and help? Really fun! Thanks for including us! Todd Konoske the retired trucker.

Yaaaayyyy!!! The weekend begins...;D

Al was instrumental on the 60 Fury as I recall. He's GREAT help !!! Of course so are the others !!! The entire crew on this channel are truly exceptional !!! That, in itself, it the biggest factor in why this channel is the absolute best automotive related channel (if you like original "quality early USA made automotive iron) along with some quality foreign specimens of the same (profit, not absolute greed) corporate period. So, to all the "real" mechanics on this channel and any of their like minded friends "CHEERS" and thanks for the weekly uplift and entertainment !!!

@MikeyMack303

10 күн бұрын

👍

Al is an absolute Canadian national treasure. Anyone who actually enjoys roofing, my hat goes off in respect.

Don't think the Fisher brothers could have imagined 64 years later, a gaggle of Albertans would be splicing one of their Chevrolets back together out of 2 cars, with one of their 37's (that still runs & drives), sitting in the garage next door. Makes me all misty 'n shit. Cheers.

So many hidden seams to hold moisture and salt. No wonder cars from that era rusted in strange places. Hunny Bunny on keyboards very cool ! Cheers 👊😎👍

@user-mq4zg1rq7t

10 күн бұрын

And on guitar at the end. A telecaster if I’m not mistaken

Saturday Night's Alright for Splicin'

More extraordinary contributions from the CWM team, certainly including Dean, Frankers, & Tom as well as Myles, Ash, & Al., who madeb yet another rich pleasure to my week!

Scott's Summer Splice Special, great entertainment as I watch the hurricane forecast down here in Texas. I love Ash's choice of cars from the Boogie Van to his older Datsuns.

@Nunofurdambiznez

11 күн бұрын

Dang, ok - stay safe!

@CircleM20

10 күн бұрын

@@Nunofurdambiznez Thanks, I live just north of Houston so we should be ok, just lots of rain and some higher winds. My brother-in-law lives and works on the coast, so he is in for a bit more.

Ahhhhhh, the moment it all goes in.....according to plan. Great work from all your assistants getting the coupe body on the 4 dr floor pan and frame. Have a great week guys and gals of CWM. 😊😊😊

Dean better be careful parking that Edsel there, you might splice a two door hardtop on it!

I really liked "It's just maybe a little over 100 horse.....but it puts a smile on my face." That's what its about.

Can all the king's stoners and all the king's men put rustie dumpy back together again.

So satisfying to have that car fit together when the Impala melded to the Biscayne. Awesome.

Always a pleasure watching an A team working on a project.

Scott, your patience and build skills are top notch. Me? Id throw a lit match in the fuel tank and walk away. Guess thats why im NOT resurrecting old vehicles.

I have never done any body work. I'm still an expert because I never miss an episode of CWM.

it's looking great gang ,thanks so much for sharing the process .

Nice seeing Jim, if only for a moment! Wonder how the Contie is. Ms. Bunny in the band!

@Jeff_Pendleton

10 күн бұрын

I missed him, where?

@chrispiazza7487

10 күн бұрын

@@Jeff_Pendleton Look around 103.00

Wow! This episode had EVERYTHING: live music, teamwork, a dramatic body splice, and cameos from Dean, Dean's Edsel, Myles' Fury, and advice from Tom. What a perfect way to spend an hour or so on a Saturday. Well done, and cheers!

If you’re like me, you start off with nice new spot weld drill bits and by the end any bit that relative size gets called into service.

@coldwarmotors

10 күн бұрын

Yep! I just buy the big "happy pack" of cheapos and burn through them... Cheers Angus!

You should rename the sill plates " Body by Fissure ".

CWM newest t-shirt`: Dean in the trunk helping with the splice... Sign me up!

CWM, you have THE best helpers any motorhead could ask for. The dedication amazes me who's showing up for the days project. This gives the phrase "the Cavalry has arrived" a true meaning. You're blessed!

I must say that CWM is no longer a sausage fest! She’s a brave woman!

Splice-tastic! Great show! That 411 and Sport Fury...gorgeous!

@coldwarmotors

10 күн бұрын

Glad you enjoyed it! Cheers from me and Miss Frankers...

I can honestly say. I have never seen anything close to this ever done. Know the work is tedious. And you men are perfection in motion. Loving this Scott. Thanks for taking us along. 💯👏👊👍

It was like watching them roll down the assembly line in the old GM factory films. :D I've watched a lot of Discovery channel car shows and I figure you should have this wrapped up in a couple more episodes. I can't wait... Cheers and all the best from the shed.

@glennnickerson8438

10 күн бұрын

If it is a true "reality" program, they'll be desention in the ranks with cussing and tools flying in anger and they will have the finished product at SEMA with an hour to spare!😆

@coldwarmotors

10 күн бұрын

Ha! Yeah, that should do it... But paint will take almost a full day, right? Cheers buddy... all the best as always from here!

@glennnickerson8438

8 күн бұрын

If this was true a "reality" program the agents would be fighting amongst themselves with cussing and tools being thrown. Then in the last 20 minutes of the show everyone would pull together and get it to SEMA with an hour to spare (remove this comment too You Tube)!!! 😆

@shedbythetracks

8 күн бұрын

@@glennnickerson8438 YT must be on break... ya got through!

Well, I would not ever give this car a snowball's chance in hell of survival. But after watch Scott save the Plymouth, ALL bets are off. Scott you got a long way to go and a short time to get there. You, old bandit, thank you ALL stay safe

What daring! What outrageousness! What insolence! What arrogance! I salute you.

Fantastic job! Y'all are really bringing the Impala along. The knowledge and passion you bring to these projects shows and I look forward to seeing the new videos every week.

Enjoyed every moment of this build! Thanks so much for saving this great car!

You guys are the best. It could not have happened without you helping each other.

Love your show guys😀i have ben a fan for years,god too se a real splice agen,cheers😀Ggeetings from Norway😃

I just love the Archaeology lesson of rocker panel history and technology, Quality KZread content at it's best! LOL

I missed the 8mm intro this week, so I'm stoked there's more on the way! This week was a teamwork tutorial, and even without a single weld, it was riveting. What a great group of guys!

It’s going to be interesting to see what type of shape the 59 Buick are in when you do the chassis swap. I wonder if the Impala was built on a Monday morning when the crew was hung over from the weekend.. Cheers to all!

@coldwarmotors

10 күн бұрын

Hi David! I think the Buick is in much better shape overall... Cheers!

I really dig these splice series. I am learning a lot about how cars are built, and also that literally anything can be saved!

So glad the buddies all came by to help out.

I love these long videos on the Chev.

Your work amazes me. I always look forward to new episodes.

Yeah man! This splice is gonna be awesome.

I've been waiting all week to see this one! I remember watching you splice the 60 Fury a few years ago and watching with a morbid curiosity just to see if it could be done. After seeing you build that car, I KNOW you'll have the Impala as sharp as a tack. And a big pat on the back to Ash, Myles and Al for their help. I wish I had more friends like you guys!

@coldwarmotors

10 күн бұрын

Glad you enjoyed it! Yeah, those guys were champions to put up with this little project, haha!

Love it! Cold war motors time fellas and gals!

Like paleontologist putting dinosaur 🦕bones back together after a find and dig. Dean looked like he was looking for a 24 in the trunk of the impala and the bottom fell out and the beer is gone.

Thanks to all the Agents for the progress on the Biscala. The Camera Operator sure got a workout landing the top on the car, Bravo. We all appreciate the content that comes from Same Old Shit Studios Scott. Best Wishes to everyone at Cold War Motors, their Families and Friends.

So if you're new here and watched since the beginning of the "Biscala" splice and asked yourself, "How in the hell - - - - ?" Well now you know, and the amazing part is one guy has the vision and three others jump in to make it happen. (Make that 4, I saw Jim at the end jockeying the nose in while Matt slacked in the background.) Props to the camera work catching the key fitments too. Oh, I still ask that question too, how in the hell - - - ?

As per the usual amazing content that car is in great hands!

Now it’s a viable project, I’m glad you guys are saving this one!

You get some amazing work done Scott, you're fortunately backed by good friends, neighbors and an awesome Standard, what a huge accomplishment this week. She's gonna be amazing if the Fury is any measuring stick...Cheers man, thanks for bringing us along!

The only type of surgery where you wash your hands AFTER the operation. Outstanding stuff. Loving every cut.

Fantastic job Gentlemen! Y'all drink a cold one in celebration!

great tune to cover it suits the channel lol thanks for the vids!

@coldwarmotors

10 күн бұрын

Haha! Glad you enjoyed it!

Great, what a progress!

your skills are unreal I watched you build the Q panels on the Ply

Ashes to ashes, rust to dust! That is some nasty, rusty stuff! Knowing Scott, he can fix it! He can fix it all....night.....long!🤣 Loved this video! "RESERECTION TIME!!!"

If I hadn't watched the Fury splice, I'd be thinking: "How in this ever going to work?!?" A two door Impala spliced onto a four door Biscayne? But I watched and enjoyed how that gorgeous Fury came together and I know this Bicala will be just as gorgeous! Thanks for your channel!

thanks to you Scott !!! Good show !!!

Scott; the work you never ceases to amaze me, Most so called panel beaters could learn a lot from your work.

This is coming together quick; it's like the car realizes it's being reborn. I know there's plenty of work left - but a trial fitting reinforces what you already know, and clues you into the next step. You're absolutely right, Scott - "old cars are fun"! Cheers!

Here we GO!

@coldwarmotors

10 күн бұрын

Cheers guys! All the best from here to everyone at Nick's Garage!

The time-lapse hammer and dolly work was very cool to see

Shout out to Tom and his Beaver Drilling Ltd. hat! Haha, horizontal drilling at it's finest. Boy that takes me back. This episode is already so intriguing and only 12 minutes in. I love all the similarities and differences at the same time. So neat!

Fantastic team effort! Being able to save something that rusty is quite an accomplishment. Working on cars out in the yard is something quite a few of us can relate to. Looking forward to more. Cheers! 😎👍🚙🏁🏁🛠🔧🪛

Wonderful splice..enjoying it....2 cars become one drivable one.

You're lucky to have the boys help shoehorn the foot into the boot!!

You got to love a buddy who shows up with a six pack

Some people have all the fun, I'm deff' jealous.

I cant believe how fast the Biscala is coming along. Its gonna look great Scott!

Brilliant build love watching your channel cheers from the UK 🇬🇧

SO satisfying seeing two halves from different cars, assembled sixty-four years ago, likely in different plants, joined together as one. I get it that leaving the rear glass in place helped keep the upper half from racking, but, man was I nervous! Wondering if Scott considered a repop trunk floor? Had the perfect opportunity to drop one in while topless. Maybe not in the budget. Maybe not Scott's style. Gonna love following this project!

Did I hear AL has a Van now. With windows? Haha. Liking this Biscala Splice Cheers to all. 🇨🇦

I've been looking forward to Chevy Splice!

Absolutely awesome guys!!

Love your automotive skullduggery. Great show!

The band activity helps ease the mind. Than some good old fashioned hard work.

Very nice. Now that is art. Not a lot of people can do what you guys are doing. You have a unique group of friends.

I love your “it’s a lovely Sunday when normal people would be doing something nice and we’re here under the Impala.” If being abnormal is what caused you to fix and doll up the two R5s, then stand firm on being abnormal! The black one looks particularly nice with the 3-broad-spoked wheels!

Hi you are the panel beater of panel beaters, never get tired of watching, old trades never die,thank you,cheers mate 👍

Think those guys that opened can play the Clash's "White Riot"? I bet they'd kill it!