Im here for it...lets GOOOOOOOOOOOOOOOOO

@AngelBDesigns

2 жыл бұрын

❤️❤️❤️

Thank you. your videos are so helpful now that im very new to tumblers

@AngelBDesigns

2 жыл бұрын

Thank you 😊

Oh yes I will order some of them ornaments

I like 1inch heat tape (I get all of the seam in 1 attempt w/o laser focus to line it up). 3 short straps to hold the print in place (middle + top + bottom), then 1 longer piece down the middle. Tape around the top first (tape hanging off then tuck/smooth inside the opening). I do make my image longer so the print tucks under the bottom. Snip the bottom at an angle all the way around. Run finger around bottom to lay the snips down, then tape the bottom similar to the top (of course no tuck inside, just press on the bottom). I do shrink wrap & yes will take focus depending on size of shrink wrap. I've also tried electrical tape around the top & bottom. I like how the tape stretched so I can really seal the top & bottom.

Thanks for sharing!!

@AngelBDesigns

2 жыл бұрын

No problem ❤️

Thank you for sharing your videos, I love to watch you 😊 Just wondering, have you tried standing your tumblers up in your oven? It looks like you can right in the middle, from my perspective anyway. I used lay mine down, but discovered I have enough room to stand them up and I don't need to turn them.

Tfs❤

Thanks for sharing. Do you epoxy your sublimation tumblers?

Can I get a link on the sublimation ornaments. Those are cool. :)

So we can use just sublimation nothing special for the tumbler since it's glow in the Dark? Also want to say thank you for sharing your amazing work.

I print my images 8.6x9.6 cut the bottom white off using one inch heat tape then put my shrink on and heat it with the heat gun leaving no wrinkles at all and then pop it in a regular oven at 400 degrees for 15 minutes and they come out great.

How do you make the cup glow in the dark because I’m trying to make tumbler cups that glow in the dark

Anyone know if you can use the shrink wrap in a heat press?

Can it be any image are the image have to be glow in the dark?

I've done a glow-in-the-dark tumbler (tumbler was white) and the only part that glows on my cup is the white (very light/almost white) parts of my image. All of the areas with darker colors don't glow.

Is there a way you have to put the tape on? Like with the image or against the image?

@AngelBDesigns

2 жыл бұрын

Not necessarily

Hey Angel. My toaster is extremely hot to!

Thanks for sharing, did it work? 😊

@AngelBDesigns

2 жыл бұрын

Yes it did 😊

What is a ring light?

Where did you get your heat gun?

@AngelBDesigns

2 жыл бұрын

Michaels

It's not suppose to be that hard

Seam looks bad

@AngelBDesigns

Жыл бұрын

Gee thanks 😑