This is VERY helpful. In my brain only spinner designs would work. Thank you so much!

@creativedesignsupply

Жыл бұрын

You're welcome !!!

I love it

@creativedesignsupply

Жыл бұрын

Thank You !!

I only have 8.5 x 11" printing capability. Have you experimented with piecing images togeter? Ive seen a couple videos but there appears to be a seam line when they piece paper together. I know i can use an 8" spinner, but those 10" spinners are beautiful!

@creativedesignsupply

9 ай бұрын

You can do that on a shirt or anything soft . Unfortunately with a hard surface I would ALAWAYS get a line.

Do you mirror both side of the image? Cause would they be going in different directions?

@creativedesignsupply

Жыл бұрын

yes

Where did you get the cow design? I love it!

@creativedesignsupply

Жыл бұрын

Etsy !

What size printer was this printed on? I only have a 8.5x11

@creativedesignsupply

Жыл бұрын

Printed on 11x17 . You can try to split print it and cut them to make one . I have not tried that method with a hard surface only with shirts and soft materials.

How do you seal them from the elements such as the sun?

@creativedesignsupply

Жыл бұрын

You can spray clear spray paint on it .

Do you mirror the image that you put on the opposite side?

@creativedesignsupply

Жыл бұрын

Yes, you mirror your sublimation print for both sides.

What size paper do you print on for a 10 inch wind spinner?

@creativedesignsupply

Жыл бұрын

11x17

Thanks for the video, I would not have thought about using a tumbler wrap. Can you give me the name of this print on etsy or the seller, I can't seem to find it on there.

@creativedesignsupply

Жыл бұрын

It is under the category wind spinner on Etsy.

where did you get the tumbler wrap?

@creativedesignsupply

Жыл бұрын

Etsy

Do you have a video on how to custom your own round spinner? I want to make a photo in the video and around it different image.

@creativedesignsupply

Жыл бұрын

Yes, it is "Design a Sublimation Print for a Blank Skull Wind Spinner" it is of the skull but you will understand from the measurements on how to design it in Silhouette Studio. So your Photo size should be 6.75 inches and bring your background design to the back.

Do you have any problem when pressing the first side ink getting on the flipside? How can I prevent this?

@creativedesignsupply

Жыл бұрын

No, we have never had any problems with ghosting on the other side. Make sure you have a good amount of pressure then you should not have any problems.

@cindyjojo777

Жыл бұрын

​@@creativedesignsupply mine bled thru

Do you have image on bottom while pressing or on top of spinner?

@creativedesignsupply

Жыл бұрын

No, I did one side at a time.

@user-xp4uh1ef9x

28 күн бұрын

​@creativedesignsupply hiii do u need a heat press to do these or is there another way u said this was close to $400...yikes... and where do u get metal things from & how much dear Thank you !!!! SATURDAY JUNE 8TH 1:42AM

Where did you buy the spinner blank from that is 10”

@creativedesignsupply

4 ай бұрын

We are sold out of the 10" at the moment!

@creativedesignsupply

4 ай бұрын

We are sold out of the 10" at the moment!

How can we do the mirror efect on the color such as mandalas

@creativedesignsupply

25 күн бұрын

Sublimation prints are usually printed mirrored .

What size paper are you using?

@creativedesignsupply

Жыл бұрын

11x17

do you have a template for the 10 in circle?

@creativedesignsupply

Жыл бұрын

No, I will just print a 10x10 square

Hello, I'd like to try this using a personal photo Is this a video to show how I can design my own?

@creativedesignsupply

Жыл бұрын

good afternoon, the video you are looking for is "Design a Sublimation Print for a Blank Skull Wind Spinner"

@paulettemusgray5730

Жыл бұрын

@@creativedesignsupply Thank you so very much.

@creativedesignsupply

Жыл бұрын

You're welcome

Is the heat paper just parchment paper?

@creativedesignsupply

Жыл бұрын

Do not use Parchment paper as blow out paper . Use butcher paper . It is much cheaper as you have to trash it after every use.

Should you leave the film on the other side??? Because mine bled thru to the other side

@creativedesignsupply

Жыл бұрын

I would use more pressure if you have ghosting or ink movement on the other side . I have not had that issue . I would take all the film off before sublimating it due to some product films melt onto products .

What does it look like unfolded?

@creativedesignsupply

3 ай бұрын

Unfortunately, We can not take a picture to show you like on our other social media platforms.

Where did you get the design?

@creativedesignsupply

Жыл бұрын

Etsy

@stephaniemartin2121

Жыл бұрын

@@creativedesignsupply Can you share the link? I can't find it on Etsy?

@AirborneWifeXO

Жыл бұрын

Yeah, link please?? This is toooo adorable 😍 ❤️

What is the size of your cow design?

@creativedesignsupply

Жыл бұрын

10 x 10 inches

Tried at temps and time suggested, but came out faded....

@creativedesignsupply

Жыл бұрын

You may need to check your heat press temp with an digital infrared thermometer and try 400* . I use 385* because the heat press in that video runs around 28* higher .