Sub250 Nanofly20: Enormous potential so LET'S UNLEASH IT!
Ғылым және технология
Sub250 NanoFly20: sub250.com/en-gb/collections/...
My BF4.4 DIFF: drive.google.com/drive/folder...
Betaflight Configurator Nightlies: github.com/betaflight/betafli...
ImpulseRC Driver Fixer: impulserc.com/pages/downloads
Support more content like this:
/ chris_rosser
www.buymeacoffee.com/chrisrosser
Looking for FPV product recommendations? www.aos-rc.com/recommended-parts
0:00 Intro
0:51 Benchtop Review
5:59 Flight Footage
7:03 This review is going far too well...
7:26 My Nanofly20 is going on a diet
9:26 Motors don't always spin on arming - FIXED!
11:08 They said I couldn't put BF4.4 on it. They were wrong.
Пікірлер: 50
dynamic damping, no pidsum raise, no thrust linear, no throttle expo? hard to believe that you really tuned that drone, when one has watched your previous videos
Fantastic! Thanks a bunch, Chris! 😊 Stay safe there with your family! 🖖😊
Can you also make tuning guide for tiny whoops like 31mm and 40mm
@modquad18
Жыл бұрын
Yes, please 🙏🏼
@lightsailfpv
Жыл бұрын
this
@xwingsxm
Жыл бұрын
yes,please
@bugsy742
Жыл бұрын
Urrrp 👍🤝
@balajiprasad9046
Жыл бұрын
Yes please 😊
What a timing lol, seeing it randomly 52 sec after release
I made a 2s hdzero one of these with the 14kv motors. It's awesome on 2s.
In case anyone else has flyaway and surging problems with this tune as I eventually did after moving to a humid environment, try turning off the anti-gravity to test if that fixes issue, as it did for me. After that you can add anti-gravity in small increments to find what is optimal for your situation..
Hello Chris, the pole number in your configuration are wrong! the correct pole number is 12 not 14
Excellent video
Good review mate, still love the Walksnail system... it makes FPV great again
Awesome video. Mine did that as with the motors bought one thinking it was defect. I got a new pid from sub250 because my camera had some shakiness to it. It's better bit I still get oscillations or a high pitch sound from one of the motors. Still a good whoop. Sometimes. Lol
Your videos are so good 😎😎
I teach young children fpv.and been donated from many company's and good friends gal kremmer painless 360 sync fpv and more.had alit of micros .but these look sweet.would love to get a couple of these.great review
Are you planning to do a test of motors for 7" quads? It will be great.
I expected good, what I got was beyond impressive. Only issue I had was the binding until I figured out it doesn’t work with certain packets😝but that’s my fault. As always great work. Thanks Chris!
Is there an explanation for setting ESC to 96k for these 1002 motors versus not finding that is best setting for larger 5" prop motors in your earlier study?
i really liked mine but it got ran over lol, its so cool having hd in a whoop.
$289, tell him he's dreamin....
Reminds me a bit of my tinyape freestyle. Really like that thing, runs on 2s which I like because 1s lipo's seem a bit finnicky to me.
@bugsy742
Жыл бұрын
Agreed mate 🤝
Nice job!! This update to BF4.4 isn't required for the TBS version, NanoFly20, but beneficial for the tuning correct? Time to 'Tango!"
Hi. What would you suggest for a beginner(with ELRS)? This one, crux 3, Meteor75pro, mobula7, FireFly16DC, or something else may be and if possible to short describe why? For the fly time, fly performance, camera(analog) etc. Thanks!
Hello, my friend, I have a problem. I did everything you said and it was great. In the last step, I can't connect the drone camera to my HD zero glasses and have an image. What settings should I do? Is it possible through your VTX?
can we use/set different hz elrs configuration on different pid profile in betaflight? lets say profile 1 using 150hz, profile 2 using 250hz profile 3 using 500hz? i mean on the same flight controller
And SUB250 are awesome over there. 😉
does this work on the 2S version as well?
The analog version is ~33g, will it be much fast and fly better?
What motor size should i buy for a 3" APEX build? A RIPPER.
Cha-Ching! Commish coming your way CR
@modquad18
Жыл бұрын
Sorry man, had to take that commission back. Quad arrived with a bent USB port that was touching the frame and the company didn’t respond to multiple emails. Had to do a claim with PayPal and they didn’t respond to them either. Just got refunded for it. Really wouldn’t recommend these guys.
I want to know more about this "REDFOX" board, what is it? Where can I buy?
I got this frame for $10 with canopy and hardware to swap a Meteor 85 walksnail gear over from. On 1s this quad is a complete dog. Pretty sure Sub250 is Flywoo as well.
Nice. I sure wish you'd also recommend a set of equipment you need to fly it. Perhaps a cheap and medium set. I'm talking goggles etc.
Sub250 gave me a new FC. But I wonder if it's a pid issue or something. Sometimes the video feed will shake amd when I make a turn it oscillation and that. But when I fly start. Sounds sp quiet. 😫😫😫
OMG I just looked at the price 😵
👏👏👏👏👍
I wonder if the GNB 27 is better than xt-30 in terms of performance.
@thirtythreeeyes8624
Жыл бұрын
No GNB 27 is a 1mm bullet connector and xt-30 is a 2mm. The GNB is good for around 10A and the xt-30 20A continuous. On these 1s micro's though the xt-30 weighs over double the gnb and the voltage drop is like 1% difference. MuteFPV has a good video with tests comparing them.
@djSpinege
Жыл бұрын
@@thirtythreeeyes8624 thanks. that was my impression. not enough performance gain to justify 2mm bullets. even though i run them with out the plastic housing. i'll be switching soon.
@sullytrny
Жыл бұрын
The male pins need to be spread with a scalpel occasionally, I still may go back to xt30 but I'm trying 150 & 220 6v caps first...
@modquad18
Жыл бұрын
@@sullytrny Yep, I switched a few whoops over to GNB27 and discovered this a well.
PSA: Ordered one of these and it arrived damaged and company has not responded to multiple emails to their Support Dept.
That target never worked for me.
run time with HD video is like 1.2 min . hard pass
@bugsy742
Жыл бұрын
😂 👍 🤝