I got everything up to the point when you said “ listen carefully “ I do love this though !

I wish you had a pedal that was an actual tape recorder emulation like the OP-1's tape recorder section where you could see the tape going around and do effects like tape stop, speed up tracks, slow down other tracks, stutter, etc.

Does this mean you can have the A and B presets, C being the freeze/infinite option, and then also the ‘non-presets option’ of whatever is on the dials of the pedal? Or does it mean once you use the MS+ you aren’t able to tweek the knobs of the pedal live on the gig?

@strymon

5 ай бұрын

Once you start using MS+, there's not a way to return to the knob position settings since pressing A or B again will bypass those presets. You can still tweak the knobs to your liking, you just need to be sure to save those changes to the presets so they're saved.

Can you do on the infinite/freeze mode on just the one button favorite switch?

@strymon

5 ай бұрын

Yes, you can use a MiniSwitch to access Freeze/Infinite mode :)

Why does the multi switch + have 3 input jacks? Is it possible to control more than one Strymon pedal from a single multi switch +? Thanks

@strymon

3 ай бұрын

Yes, that is possible, depending on the mode it is set to.

@drewson2a512

3 ай бұрын

@@strymon can you tell me if I could change patches for both the Cloudburst and the Brig using just one multi switch+. Thanks

@strymon

3 ай бұрын

@@drewson2a512 Yes, you can do that.

@drewson2a512

3 ай бұрын

@@strymon can you give instructions please? Thank you.

@strymon

3 ай бұрын

@@drewson2a512 If you don't mind shooting us an email to support@strymon.net, we'd be happy to walk you through it! We can take you through configuring both pedal's EXP jacks, MS+, and then saving presets from there.

The infinite mode isn't something I need. If I just want two presets, is it better for me to use a single mini-switch and have the preset and whatever the knobs are set to?

@trini8652

2 ай бұрын

yes

I am only getting one preset and the hold function. A and B are bringing up the same preset.

@strymon

4 ай бұрын

Hey there - email us at support@strymon.net and we'll get you sorted out!

Can we use non Strymon switch to access freeze mode?

@strymon

Ай бұрын

Absolutely! Most SPST normally open switches should work just fine with Cloudburst.

you didn't cover saving presets?

@strymon

5 ай бұрын

You're right - thanks for pointing that out! The process is easy and works the same if you're using MIDI or MS+. Start by dialing in the sound that you would like to save as your preset on Cloudburst. Then press and hold the Cloudburst's footswitch for at least 2 seconds, until the LED blinks GREEN. Once you've done that, press the A, B, or C MultiSwitch Plus footswitch to save the current state of the pedal to the desired location on MS+. Hope this helps!

@Akapickles

4 ай бұрын

@@strymonI followed these directions and saved A (no ensemble)and B (with ensemble) presets. But after selecting B and going back to A, A is now the same as B.

@briannkent

4 ай бұрын

@@AkapicklesI have the same issue.

@mitsuoyoshiki

4 ай бұрын

same issue, cant effectively save presets, please help

@jeffd8597

4 ай бұрын

Same issue won't save presets with the multi switch connected. . HAs anyone tried saving the presets first before you connect the multi switch? Then the presets are already in there. I'll try it later have to go now, but just thought of that.@@strymon

Be aware if you plan to buy a Multi Switch Plus: Infinite is not working in custom mode ATM - it’s just a latched version of the Freeze mode. And Freeze mode does not capture and sustain the reverb applied to the signal indefinitely (as stated in the manual). It is fading out….

@strymon

2 ай бұрын

Hey there - sorry to hear you're having issues, please email support@strymon.net and we'd be happy to troubleshoot. Thank you!

@geha6596

2 ай бұрын

​@@strymonI have done that and you have confirmed the bug. Just wanted to make people who see this video aware of this problem too. And perhaps it will help to ensure that the bug is fixed in good time.

Why do you completely leave out how to save presets?!?

@strymon

3 ай бұрын

That was our bad! We did leave that out. The process is easy and works the same if you're using MIDI or MS+. Start by dialing in the sound that you would like to save as your preset on Cloudburst. Then press and hold the Cloudburst's footswitch for at least 2 seconds, until the LED blinks GREEN. Once you've done that, press the A, B, or C MultiSwitch Plus footswitch to save the current state of the pedal to the desired location on MS+. Hope this helps!