STREET DRIVEN 600HP SCOOT 26B QUAD ROTOR RX-7 FD3S
Автокөліктер мен көлік құралдары
The most insane and amazing FD3S in Japan belongs to our friend and it's packing a screaming 787B style 26B quad rotor made by SCOOT and capable of 10,000rpm when it is totally run in.
This is a world exclusive scoop for us at 7Tune so turn up those speakers and enjoy it!
More details on 7tune and www.7tune.com
Пікірлер: 282
This 4 Rotor Mazda 26B Engine is the equivalent of a short stroke highly cammed V12 engine. But unlike normal piston V12 engines, it produces way over 700HP without turbo from just a 2,600CC engine, where on the other hand a normal V8 / V12 needs to have atleast 6,000CC to produce that much horsepower without a turbo, so therefore the 26B rotary is the most efficient natural aspirated engine in the world yet!
@party_boy69
9 жыл бұрын
i won't go into the why because google does a better job of that. but if we were fairly comparing rotary and piston displacement we would actually say that a rotary engine displacement is actually 1.95 litres multiplied by the number of rotors. so a 2 rotor (13B) is actually equivalent to a 3.9 litre piston engine....and to be honest it's probably even more than that because rotaries actually produce less power from the same amount of air as piston engines do... all that aside, i still love rotaries. they are excellent race engines. they sound amazing when they are modified. and by design they breath way better than piston engines, so really the best thing you can give a rotor is a turbo to force as much air in as possible. the one in this video is NA, so with 4 rotors, it closer to a 7.8 litre v12 (all of a sudden 600hp sounds about right)... ps. i would own this car within a heartbeat if i could
@gmonsen
9 жыл бұрын
steve6493 Having been part of the discussions over displacement on rotaries since 1990 or so, it is valuable to note what Steve says here. You take the number of combustion events in one turn of the eshaft times the displacement to get some sort of comparison. However, they really are not comparable in most ways. Suffice it to say that the rotary engines are way smaller and lighter. Imagine the size and weight of the hypothetical 7.8 liter V12 and you get the idea of just how small these are.
@lloydcarrillo3334
9 жыл бұрын
gmonsen But what are you saying? I didn't get you.
@EJ255BL9
9 жыл бұрын
Lloyd Carrillo it's rather simple, on normal 4 stroke engine, 1 complete cycle with 1 power stroke will turn the crank twice(720 degrees), but on rotary engine you have 3 power strokes to make the crank turn ONCE(360degrees).... so in simple words, the 2.6L rotary equals to a 7.8L otto cycle 4 stroke engine, 7.8L to make 700hp is not that unexpected..in contrast, Honda S2k's F20c makes 125hp per 1L... hope it helps
@Bisque55
9 жыл бұрын
I don't know about the MOST efficient...especially since a 6B rotary engine exists that makes more power than this 26b.
That may just be the most glorious engine sound I've ever heard in my life. Sweet baby jesus...
4 Doritos are better than 2
@DemeterVT
4 жыл бұрын
I'M AGREE !!!!
saw this car in person at a car meet held by superstreet while i was in Tokyo and it sounds insane! If you think this video was beast you should have seen it person. instant jizzzzzzzz
@zildog
9 жыл бұрын
andrew lau Which meet? The most recent one in Akihabara? The organisers told him to get out because the car was "too noisy" they said. What the fuck did they expect a quad rotor to be?? A Prius? I'm NEVER going to a superstreet meeting ever again. Neither is Yuki. Was just an insult and a waste of time and money.
@tombowie7945
8 жыл бұрын
+Adam Zillin hey how would you go about building an engine like this? seriously hoping to build one in the future.
@adamzillin3333
8 жыл бұрын
+Tom Bowie Well, you'd need to get an eccentric shaft made up and then find 4 each of the rotors, housings and seal sets! You'd need a budget of at least $50,000 to get the job done... it's definitely not a cheap engine to build and even then you can expect only 50,000 kilometers out of it before it needs a rebuild... if you drive the thing on the redline at 10,000 you'll only get 30,000 kilometers out of them... Insane, I know.
@NatureGemsDecor
8 жыл бұрын
+Adam Zillin What dumbasses. I would have started that shit and made literally as much noise as humanly possible (Although with this car, how hard can that be)
@tombowie7945
8 жыл бұрын
Thanks man, Would be a dream to give building one a go some day.
"We will have clips of it running at 10 000RPM Oh god, have mercy !
The sound is song to my ears. = More plz
visually, this is probably the only rx7 that I actually like. It looks like what I think a modern factory rx7 would look like.
@viktorsecic
6 жыл бұрын
So, that means that you like stock rx7? I have to admit that it's design is well ahead of it's time, but trust me, it's not even near the looks of a modern cars. Look up for, let's say, new NSX, Mclaren P1, Subaru BRZ... Pop up headlights are so 90's. With a decent modification, this car could look like Lambo IMO.
@kylemorgan2110
5 жыл бұрын
That's the Efini Rx7 it's the luxury one and yes very stock looking indeed
Best sounding car I've heard.
I came down here to see shit talking Trolls... Actually didn't see any... I actually learned a lot reading the comments! Good video and knowledge!
one of the best sound i have ever heard for a rotary...
That thing sounds awesome!
Sweet Jesus i want this as a ringtone. It would be better than the F1 ringtone i already have
@zildog
10 жыл бұрын
Just wait until we get the next vid pulling to 10K!
madmikes been rocking this engine in his rx7 for a couple of years now
@zildog
10 жыл бұрын
Yep but it's not street registered or street legal - just for competition. Scoot, who built this engine have been doing quad rotors for years now... but they are very expensive engines to build.
@simonevitt5466
10 жыл бұрын
Adam Zillin There has been a few street registered 4rotor FD's in NZ. One going back as far as 2006 and that was Peripheral Ported. Wouldn't mind betting that the eccentric shaft in the SCOOT engine was made in NZ also. 4slick.com/download/DWvrApldDfw/video/26b_Pp_Four_Rotor_Rx7/
@AccAkut1987
10 жыл бұрын
Simon hbcosmo there is one in the Netherlands also (not yet registered, but planned) www.rx7club.com/build-threads-294/4-rotor-fc-build-974831/page12/
@Team503
9 жыл бұрын
AccAkut1987 Defined Autoworks in the US is building them as well. Not sure if they're street legal, but probably not.
@trexeater101
9 жыл бұрын
Simon hbcosmo yeah seen street legal ones here in NZ on a few occasions i think that there is even a street legal twin tubo quad rotor lexus that came out of mad mikes shop
what a unique sound, commands respect.
That beast is brutal, wasn't even pushing it. What a monster.
awesome work the car looks and sounds incredible.
Its like my birthday gift damnnn my birthday was on 20th August and love rotary....hurmmm a masterpiece
better than RB26, LS, 1JZ, 2JZ and EJ25 best song i've ever heard
the best sounding car in existence
If money was no object then a 26b FD is without a doubt my dream car.
Holy fuck, this thing sounds amazing. Subbed, can't wait for updates!
Damn, amazing sound!!
That was only running in the motor? HOLY F***! Keen on seeing the next run :p
Let me play you the song of my people
amazing sound!rotary rulez!
Wheen i see a rx7 it brings me back to the Gran Tourismo days on playstation. Just love it
awesome 4rotor sound! nice wangan night!
Never heard anything like it, this thing sounds insane! I would expect it to do 10k rpm fairly easy.
Sounds like heaven
Awesome rotary...
this ... is ... so beautiful
damn, dat sound! Im in heaven.
love the rotary engine make
this video BRAP my world !
Alright you got me, subscribed. i love it.
Turn your bass to max.... You won't regret
damn i love the sound :d
Some day I would have this car! For now.. I'm happy with my 1jz 180sx lol
whoa! just...whoa! *jawdrop*
Very nice
I love how when he floors it, cars are still passing him.
I want more, so I subbed.
To say its the "one of the only 26b in existence" is ridiculous. Autowerks has a 4 rotor engine for 8000$ that anyone can buy.
@zildog
9 жыл бұрын
I did not say it is the ONLY 26B in the world. But I did say it is the ONLY Peripheral Port 26B in Japan - and one of only a handful in existence. Please learn to read.
@ne0tas
9 жыл бұрын
I want the link for that 8000 dollar 4 rotor please
@trexeater101
9 жыл бұрын
Adam Zillin not the only one in Japan though mad mike's Japanese team have the JAPBUL there
@Joekun122
9 жыл бұрын
trexeater101 but isn't mad mike's quad rotor FD a turbo and not an NA tuned motor? his FD is a twin turbo quad rotor right? isnt that a different build? sure, same motor but... i dunno, just saying? o_0
@trexeater101
9 жыл бұрын
his Madbul quadrotor FD is N/A in New Zealand producing 700+ HP but his Japbul which is also an FD is twin turbo, same layout as this and in Japan
that's loud!
I DIED AT 1:19
@korakkarok
8 жыл бұрын
+Lamar Henry same goes here, holy shit, heart stop beating
@Yarusi
8 жыл бұрын
Eargasm. That's the definition of a dream car
@japex0323
7 жыл бұрын
I wanna hear it rev to 10k so bad..
@MiGujack3
6 жыл бұрын
me too bro
@korakkarok
3 жыл бұрын
Me too lol
Starting to save up my coins to start an rx7 build. Might even sell my Z if I really want it that bad.
EARGASM!👌🔰
Holy fuck this thing is vicious
Missed out on the best part going through that tunnel
Wait!? 26B 0.o Thats the same engine thats in the Mazda 787b?
@zildog
10 жыл бұрын
That's right! Basically the only major difference between this FD and the 787 is 200 kilograms of weight since they are basically the same on power...
@Rotary_Lover_89
10 жыл бұрын
Adam Zillin So this this 26b is a R26b with the three spark plugs per rotor and variable length intake runners for the ITB'S
@zildog
10 жыл бұрын
240rx7rksti89 There are some minor differences, yes - those are the worst. Fact is, it makes almost as much power. That's a good thing! Enjoy the noise... ;) - and the fact young Japanese blokes are still passionate about their rotaries... because without cars like this, there is no reason for Mazda to even bother...
@JoranDorifuto
10 жыл бұрын
Adam Zillin Thats amazing! 0.o
@Rotary_Lover_89
10 жыл бұрын
Adam Zillin wasn't trying to start shit talk just wanted clarification man, either way I'm jealous cause I'm a broke yank and live a country that more than 50% of its car nation think the rotary is a pile of water metal.
naturally aspirated right?
Hey Adam Zillin when is the next this cars gonnabe out? and where in japan cause i would love to hear this beast and see it in person. plz lmk thanks
I want that custom exhaust
Um New Zealand has done this year's ago... So.....
@zildog
10 жыл бұрын
And Japan through Mazda pioneered the rotary engine decades ago... what's your point?
@StanceGaming
10 жыл бұрын
Adam Zillin true
@RalliArtDSM
10 жыл бұрын
Adam Zillin They didn't pioneer it. A German for Mercedes did. After he could no longer work on the rotary, the blueprints and research were sold to Mazda.
@zildog
10 жыл бұрын
I'm aware of that. By "pioneer" I meant that Mazda "..was (is) among the first to research and develop a new area of knowledge or activity."... as is the definition of pioneer... which directly relates to the rotary engine.
@Team503
9 жыл бұрын
Adam Zillin The Wankel rotary engine was invented and designed by the German engineer for whom it was named - Dr. Felix Wankel. Almost every automaker experimented with Wankel engines in the 60s, Mazda is just the only one that stuck with it.
Please post more !!!
Sounds so fucking good
mazda rotary , é único no motor(motor diferente dos convencionais é construido com rotores) e no som, se tiver 4 rotores o som é muito parecido com a "fórmula1"...
Not the only. Theres the JapBull
@zildog
10 жыл бұрын
Correct but this FD is the only Peripheral Port in Japan and possibly the only one in the world. And MM's FD is not street legal or street registered.
@fuzyfrog
10 жыл бұрын
Adam Zillin No but fourre is
@Dingle182
10 жыл бұрын
Adam Zillin there a shitloads of p ported rotors around, japbull, madbull, both quad rotor p ports, not to mention countless 20b p ported engines, and god knows how many 13b p ported engines around the world. japbull is the magic car, that lives in japan, so there's definitely more than one.
@andylaurel
10 жыл бұрын
Adam Zillin It's on carry numbers. So... it's not registered either.
@zildog
10 жыл бұрын
DingleNutZ I was trying to say that this is the only "Peripheral" Port 26B in Japan and possibly one of only a handful on the planet. I know this because I know the owner of Scoot and the owner of this FD.
when are the 10k clips going up.
10k rpm chriiiiiiist
すごすぎる
what front bumper is that?
Quite an expensive project but it is worth it
I NEED NEW PANTS!
My my God!!!!! Sound makes more mad about RX 7
sounds like a superbike
Mui bonitos (perhaps just needs a Ford block;p
well .. thats insane !! there s any way i can buy a 26B block ?? what brands make rotors and this block is OEM mazda ?? or it is custom made ? well i dont really know a lot bout rotary engines but thanks if someone answer me ! (sorry for english mistakes )
Madmike has a 26b turbo and so does carl thompson also of n.z a toyota aristo with a 26b twin turbo methanol injected drift car
im pretty sure there are a few more quad rotors than this in japan.. TCP Magic has made them, and PPRE in New Zealand has made heaps!
@retroyugioh7563
8 жыл бұрын
Check the date of the video. There are sure to be some more by now though.
@VictorMartinez-dv9cf
6 жыл бұрын
26Bs in Japan?
man im realy looking into getting a 90 rx7 as my second car ...( messed up my first one which was a 6 cyl 92 firebird which im repairing ) and i realy am wondering what a 20 year old like me should do on a budget im talkin like 450-500 whp daily driver i mean wouldnt the 20b and 26b be a bit over kill?
i bet i have watched this 60 000 times now. FUCK I NEED LOUDER SPEAKERS
😍
1:20 the most bat shit noise ever.. i love this thing
any updates on this or this is dead?
Anyone knows what wheels are those?
In Forza I installed the 2.6 liter rotor in my rx-8. It says it has 720 horsepower but idk if it's realistic. I will say I have never heard a better sounding engine in my life! I hope to buy an RX-8 but does anyone know how they do in cold climates???
" perfect. "
Instagram? Where can I follow this beautiful piece!!
4 rotor FD3S - FOURRE
🤯
I wonder what this rotor would do in a F1 car. Tuned F1 race car, original setup VS F1 with a quad rotor
How much would this car cost me to buy if I purchased it from you and how much have you put into it?
Cool project!!! i think this is 350+hp
@amyasseektruth8246
8 жыл бұрын
+papavalesRS I'd say anything from 800hp to 1200hp. 350hp is an insane 13B or a mildly tuned 20B.
@papavalesRS
8 жыл бұрын
This car seems that is not ready yet. I doubt this is more than 400hp in this video. Its an old video though, maybe today this project achived something close to 600hp. 800 to 1200hp???? Come on lol...By the way owner and builder said that the car needs a lot of final tuning to achive a reliable motor with 600hp
@amyasseektruth8246
8 жыл бұрын
papavalesRS some 13b Turbo's reach 500hp... 20B hitting 720hp... would you like videos of these beauts or are you sceptical? I know it sounds insane, but that's how it is. Mad Mikes 4 rotor is sitting at 1200hp+ ....
@papavalesRS
8 жыл бұрын
I know what 4 motors projectx can do, but you missing the point. I m talking about this project. Here in greece we have a 600+hp 3 rotor project that is 2 times faster than this
@amyasseektruth8246
8 жыл бұрын
papavalesRS maybe I am missing the point. You telling me that this built as it is in the video is only 350hp+.... nothing over the top seeing it isn't tuned to full potential? It's capable of more but it's not refined... is that correct?
Aaaah my god ... and that is how a "noise" can make you throw every shit in your life and go start a project car !!
for a 26b i was expecting it to sound much different... goes to show putting on exhaust kills the sound of the 26b (still mean as hell though)
DO NOT listen with headphones at full volume
jesus
I assume that Scoot took cars of 公認車検 (kounin shaken) to make the car street legal considering its 2016 and the car would have had to have its inspection done recently. So many sites say that the 26B can never be made street legal, but either Scoot did or they paid someone off to stamp the papers and get the tag. If so, good for them.
wait what??this is an original 26b out of a 787??where the hell did he find this????
26b, lexus gs400.
ορεο
ロータリー頑張れ!
26B doesnt sound anything like the 13J...
I could have swore scoot was a 24a
NZPC: Quad Rotor Turbo Mazda RX-7 Cover Car
Great sound, but can't help but correct the statement that this is NOT the only PP 26B in japan.
@zildog
9 жыл бұрын
According to Scoot, this is the only PP in Japan.
I wan’t that engine and that badges on an rx8
26b... The most swapped engine in the history of forza drift noobs haha xD
Are you sure you meant CLIPS 1:51 ?