It just needs a "DEFLATE" button and a built-in analog PSI gauge, and it will be perfect.

@chickenpermission9969

2 жыл бұрын

I wonder if something can be rigged up to the Purge button for a deflate option....

@blueman5924

2 жыл бұрын

so if its all still hooked up, unit turned off, cannot one simply hit the purge button to deflate ? the tire monitor system will display all four pressures. 🤷‍♂️

@TuanNguyen-ld8kl

2 жыл бұрын

Not a new system. Innovativeatproduct has one for quite awhile now. It the same right down to the hose carry bag plus analog psi gauge and deflate/purge built in. As a matter of fact you can have preset deflate setting. Have it on my gladiator for a year now. This one is a little slicker with the no drill air valve mount.

@ruready4adventure743

2 жыл бұрын

@@TuanNguyen-ld8kl I went to look for such an item, even googled it. No such item found. Please let us know of a website. Thanks.

@JoelHansma

8 ай бұрын

I was thinking they also needed an analog pressure valve, I would also assume that just pressing the purge valve while hooked up would let you air down quickly, and all to the same PSI. Since it is all press to fit lines, I would imagine you could easily just add a valve to the line?

That's a really well designed system and I like that the hoses aren't dragging on the ground while in use. Would love to see an option of a stand alone pressure gauge on the main control panel so tire pressure sensors aren't required.

@wesman7837

2 жыл бұрын

Pressure sensors are ridiculous, and it seems like they are always malfunctioning. I swear every car that has them one of the four is not working.

I got the outback tailgate table with a magnet to hold my knives. It’s got a slide out bamboo table with it. I love it!

Outback Adventure Trailgator has a solid latching system and I love the look and wooden undertray, plus you can put your logos on it. Sweet.

@Onebandit

2 жыл бұрын

I love my outback table works very nice solid and doesn’t rattle at all

@thecodedgamer

2 жыл бұрын

Yes, this

I mounted a viair 480c under the passenger seat of my JK two years ago. While I was building the mount a few people stopped in and said the sound of the compressor was going to drive me nuts inside the cab. It really is not bad at all, the seat seems to muffle the sound quite a bit. It is a great spot for a compressor less chance of damage and keeps it out of more valuable space like under the hood or cargo area. I’m seriously thinking about getting a JL this spring and will definitely consider this kit and save myself hours of fabricating. Great video. 👍

Man I love this, so awesome. Not just a product I can get behind, but the people behind it. Let's go Landon

Looks like my Innovative AT Products kit, except without a gauge. I do like the purge button though. Difference being I can switch mine from either side with the Aux switch.

colorado canyon enthusiasts have a similar setup called the hardliner 4-corner air system that puts a quick connect fitting inside each wheel well so you have 4 short hoses, one to each tire respectively. Compressor goes wherever you want and all the lines to each corner are run along your frame rails permanently to a small bracket. Just got it for my zr2 duramax and really excited to try it out!

I made dual tire inflator with Milwaukee M18 inflator. I used two Flexzilla 25ft hoses attached to splitter. M18 inflator is strong enough to pump 35" tires with no problems. All fits inside Milwaukee packout. Whole kit costed me 350 dollars. The benefit is, I can use it on any vehicle I'm planning on taking.

I installed the Frontrunner table after spending weeks doing research. It is awesome.

Clean and space-efficient... That's a well thought out system :)

Awesome, I was looking at option and will buy when available!!!! Thank you

American Adventure Lab’s table is the best! I installed one and love it. It’s solid and looks fantastic.

I have absolutely no need for this but want one just because it's so well made. I should drop by the Epic shop just to see all the cool stuff sometime

Wish it had a pressure gage included in the system. Would also like to see standard quick connects at the manifold locations so one could use existing air accessories. But overall it looks really cool. Would be a lot more work if you were running ARB lockers as well.

@joecollins69

2 жыл бұрын

Agreed. Needs a built in air gauge.

@dougbourdo2589

2 жыл бұрын

I would install a small air tank as a pressure reservoir for the lockers.

@hondoflatty5125

2 жыл бұрын

Go with original, this is a knockoff. It has both of what you're asking for. Innovative AT Products.

That looks awesome! As a 4Runner owner, I'm officially jealous! Just don't let the other 4Runner owners like Chef Jon know that I said that out loud. LMAO Great job, Epic!!

Super clean system!

Awesome stuff, Thanks!

American Adventure Lab Versa tailgate table of course! Painted any color. No cable support needed. Lights, magnet, molle, bamboo, and bottle opener. I call it man jewelry. 😍😂🤙🏼

I will add my two cents to the discussion, the Outback Adventure Products Trailgater with the slide-out wood cutting board is the only way to go with tailgate tables. It is worth every cent, I love mine.

@Skate42112

2 жыл бұрын

I have the trailgater myself. Very clean look and hands down the best talgate table

@dragonseggs

2 жыл бұрын

Yeah just wish there was molle attachment on the bottom side of the table.

Awesome system, Epic should sell out the first run quickly!! My wife likes to sit in the cab while I air up, so I think it would be too loud for her, but that isn't the same for everyone.

Casey needs a windshield sponsor 🤣

Outback Adventure Table is the way to go. Love mine, no rattle, slide out cutting board adds good space too.

The Outback table is incredible.

That’s a smart guy. Good job!

Needs a deflate option as well as a guage for preassure for cars that don't have tpms. Will definitely be needed as the kit evolves for more vehicles

I am using a Springtail Solutions for a table it also has molle attachments for a year, 👍. Even if u don’t use the molle panel it weighed significantly less then others I tried.

That is the best air system I have seen to this date. I was waiting to figure out what I was going to to do for air. But thanks to Epic they figured it out for me! I am ordering once it becomes available again. Thank you!

Front runner table is fantastic. Good aluminum with a slide out wood extension

Awesome . Be awesome in Jk system game changer for sure

I'm digging the tailgate table idea!!! That would look good.. they have a jku air setup yet

Nice, i made the same system a few yrs ago but with a gauge and dump valve.

awesome system - with symbiosis, too! Seriously would like to have in F150, too. But should be easy mod I would think, just longer wires and air hose.

I really like this, nice job (Lendon?). I was wondering, being that I have the factory mats on my 22 JTSD and currently use (I think) that drain hole for those, do I have another option for running the wire through the floor? As others have mentioned, I would also like to see the switch on the drivers side (as I will be watching my dash, gauges would also be cool!

Nice kit! As far as the tailgate table goes, take a look at the one made by Goose Gear. I saw one in a friend's JL, and it's a pretty nice design, as is most everything they make.

judging by your name, and info drop of " having to leave an island" i guess you live where i do, Beautiful Vancouver Island! awesome job guys.

Merch: DirtyandDangerous.com Save 10% if you're a Patreon Member! Join Here: www.patreon.com/Casey250 All My Links: bit.ly/m/casey250

@neverendingweekend

2 жыл бұрын

Great video. Hoping they’ll make for the bronco.

@neverendingweekend

2 жыл бұрын

If those connectors self close then why do you need to use those red plugs if you’re only using one side?

@OrganizedMud

Жыл бұрын

Will this kit work with the ARB Bluetooth pressure control module system?

Great work Landen

Nice job Casey..

Even if you don't run larger 33"+ tires you should get the duals for the infinite run time time allowing larger tires later or my favorite idea is to run air tools like impact socets or pneumatic tools for offroad repair! If you have the twins you can help anyone in the group!!

I’ll keep my duel compressor under the hood on my JKU With Quick disconnect on my front bumper. Super simple switch where my locker switches are. But good luck with your new product.

You guys should run something like a air lift up and down switch to make airing down just as easy from the inside. Also a small air tank would help take off some stress from the compressor and speed up air ups. As for your tailgate table I saw a trail recon video a few weeks ago where he showed the one he’s making it’s stainless with a pull out cutting board which would be pretty sweet.

Very cool

As a semi truck , and heavy equipment mechanic. I use these fittings daily and replace them daily. Yes this system is totally serviceable, witch is nice. How ever. If your airing up all the time these fittings will wear and leak. The push to connects are not meant to be constantly undone all the time. If the hoses are not flush cut nicely and square they will leak. If they get pinched they will leak. If the get pulled on constantly they will leak. And if they constantly get hot , they will leak. Just my 2 cents. I like this idea and how clean it is. Don't even have a jeep. This was just a recommended video on my feed. I like your video editing layout and channel this far. New sub!

@OscarOliu

2 жыл бұрын

Just curious, my dad has had the same ones for decades, they are made by Snap-On I believe, and they don't really leak, there is one gun he uses that leaks, but the nozzle is the issue.

Outback Adventures all day long! 👍

I need this for my JKU!

I've had my ARB twin compressor under my passenger seat since I got my JL Diesel 2 years ago. This seems to be the cleanest design set up yet, but it's not much different from what I've been running (I also use Speedflate). I recall you saying that you didn't like the under seat location for the compressor because your daughter didn't like the noise . . . I guess that's not an issue any longer.

@Casey250

2 жыл бұрын

Indeed. A lot has changed in 2 years and 99% of the time I use this Jeep on long trips to make videos riding solo.

Adventure Labs makes an awesome Tailgate flip table with wood choices and molly when closed!

Outback table!!!!! Awesome company out of UT

Very cool BUT I would like to see the power switch on the driver's side

My husband and I just installed an Outback Adventure Products Tailgater with the cutting board and magnetic utensil holder. The quality is second to none. No rattling on rough roads. Well worth the investment!

@JeepinBailey

2 жыл бұрын

I second this. Mines rattle free and been super useful.

Nice idea, but instead of left and right side air connections I would have preferred fron and back air connections. Additional a small pressure gauage on the swithch panes and self locking air connectors would be beneficial. Just my two cents on that nice system.....

I've been using the twin ARB under my passenger seat with the SpeedFlate for over a year. This system doesn't allow you to air down or see your current pressure. Even the TPMS sensors on the Jeep isn't real-time, so it's not totally accurate. Also, can't hookup an ARB line with accessories. Not having an air-down valve is a huge short-coming. I love being able to air down and have the exact pressure in every tire with SpeedFlate. I'm sure you could add this feature...really important!!!! Otherwise looks like a great build.

OMG I knew your Canadian when you did pro cess. Lol

Those air chuck connectors are cool

Any future ideas for Toyota 4Runners, presumably a 4th Gen. This is awesome and would solve my inflation problem in what to get/buy.

The logo on the switch was silk screened for sure! 🤣🤣

If you only use the compressor for filling tires, cool setup. I like the valve stem chucks. No pressure gauge is an L.

That's an awesome system. Would the mounting brackets fit for a RHD vehicle? What I mean is, Our driver's side is your passenger side. Will the compressor mounting bracket which goes under your passenger seat, will it fit under our driver's seat (Australia}. Cheers.

Nice Omega sea master Planet Ocean!

@Casey250

2 жыл бұрын

Thx. One of my all time favorite watches.

I didn't agree with the push connect, but i understand to make it easy to sell and market. And easy for non mechanical people to understand.

Happy Happy Happy!

This would probably be a good fit for , "Matts off road recovery." 👍😊

I’d also recommend the Outback Adventure Table, I bought it after watching Trail Recon review and I love it.

I have a 2016 JKU, any plans to adapt this system for the JK series? This is super clean and efficient. I'd really like to add this to my build. Thanks

@iFanchi

2 жыл бұрын

Me too. 👀

I need that for my 4runner!

I've been looking at the ROCK SLIDE ENGINEERING TAILGATE TABLE I'm Interested in what you decide to go with.

American adventure labs has a really nice table - really like mine + has a molle panel

This video and product could not have came at a better time seeing as I just had my compressor stolen from my truck a few weeks ago and I have been looking for a replacement setup

This is way nicer than the Jk Products kit. Do you know if this is compatible with a 2021 4 runner? A friends was asking.

Cool

That’s great. But how well does it mount on a swing up left gate of a Tahoe?

Ford raptors need this set up also.. I’d buy it for mine

looks great. will this work with the new power seats in the 24 models?

@Casey250

8 ай бұрын

I'm not sure if the new model is out yet but they have redesigned it slightly to.

Similar setups have already been made. That pretty cool tho

You have an Aussie ARB compressor good choice! I might even buy 10 for my Aussie RHD customers but so sorry LHD only😢

Very nice and clean setup. How flexible will the hose be in your extreme cold weather up where you live?

@TheEPICBeardedGinger

2 жыл бұрын

We have had no issues where we adventure up here using these hoses, had them on many systems over the years.

Do you know if they are going to make kits for other types of vehicles like the bronco and Tacoma?

Just wondering if they are considering a JK mounting plate or would it be a complete redesign of the mounting plate?

Well this works for your application if you are running same air pressure front and rear. I’d like to see someone actually develop something like the H1 had where you don’t need to string out all the hoses at all.

A pretty bold title for a product designed to fit a whopping 2 model's in the vast world of off roading

What brand is that mount for your pillar lights/overhead windshield

American Adventure Labs makes by far the most innovative tailgate table, but not cheap at all compared to some flimsy bolt on ones out there though.

I hope they release a similar product for the Bronco. I’d like to support a local company.

@TheEPICBeardedGinger

2 жыл бұрын

😏

that tire pressure ballancing effect alone makes this system worth owning. Just make it for dodge ram trucks and ill buy it for sure!

Goose gear table, no rattling at all and fits like a glove with no drilling

Will one be available for the Jeep Wrangler JK?

Great kit although I would mount the compressor under the hood or somewhere less noisy.

Looks very well designed. I'd love to see something similar for the new Bronco.

@Casey250

2 жыл бұрын

Me too :)

@Boeruine

2 жыл бұрын

Let's second that

Another vote for the Outback Adventure Products Trailgater

I usually run higher pressure in front where the weight is, a 55/45 valve might be nice for proper tread wear

@iamleidig

2 жыл бұрын

Lol, that's the very next topic you addressed in the vid

Interesting

They should have a version that only pumps two tyres. Quite often people run slightly different pressures front and rear. Maxtrax has a great product call “indeflate” just connects to the normal air fitting and does two tyres… it also deflates two at a time.

@tonyjackson8640

8 ай бұрын

That was covered in the video.

You can use the purge button to deflate all of the tires as well.

Will this fit on the Bronco?

Rock Slide Engineering has a nice table for the tailgate.

That's a fancy seat warmer you got there! After living with this for a bit, how much heat is being added to the cabin? Curious, since I live in Phoenix lol.

@Casey250

2 жыл бұрын

None that I notice

Would it be possible to make mounta for an 99-04 grand cherokee wj

The only thing I can see that would be nice it a pressure gauge near the power switch. It would be nice to be able to see system pressure if filling another vehicle that doesn't have TPMS.

I wonder if I could make this fit under the passenger side seat of an early bronco?