"I get by with a little help from my friends!" Thank you Wyatt!!

CAGE COMING SOON BOIS 😎

@jimxiong04

4 жыл бұрын

Congrats

@Nebbia_affaraccimiei

4 жыл бұрын

8's too?

@jmyd83

4 жыл бұрын

I've never heard that before lol

@NitroGuyJH

4 жыл бұрын

Gonna get that Kyle cage finally. Lol

@brd64021

4 жыл бұрын

Some of those plug wire covers with the metal rings can be unclipped and re-clipped, don't know which ones you bought tho

Everybody needs a friend like Wyatt to keep them in check.

@HashCracker

4 жыл бұрын

And to keep them warm on those cold colorado winter nights.... so warm so cozy so tight...so masculine, or so not... although i think wyatt should show more skin and stop being such a prude. Hes so mysterious like is his dadbod hairy or not, does he have a sexy farmers tan or not...

@Metigulous

4 жыл бұрын

@@HashCracker 💯 😂

SHOULD HAVE HAD A ROLL CAGE 3 MONTHS AGO just saying

@FreddyDUZ747

4 жыл бұрын

Jog on champ.

@Metigulous

4 жыл бұрын

YOU RIGHT 😂

@tma4137

4 жыл бұрын

Why state the obvious?

@macro820

4 жыл бұрын

I just want to see a real mother freaking pass not a brake at the end bull s pass. And for you to not die.

@theangryitalian7922

4 жыл бұрын

FreddyDUZ747 safety 3rd... it’s all fun and games until you’re in the hospital or dead.

12:00 Seen Kyle scoping out the interior for the cage he’s gonna be building. Lol

@glampstronzartonalbee3097

4 жыл бұрын

i hope kyle doesnt do it, hayden will make it better

@_Bonez12

4 жыл бұрын

@@glampstronzartonalbee3097 hater

@426moparman426

4 жыл бұрын

Glampstron Zartonalbee kyles got more experience building cages....just saying

@Shadow0fd3ath24

4 жыл бұрын

Nah hayden and wyatt bought a bender so they could do it themselves

@Shadow0fd3ath24

4 жыл бұрын

@@426moparman426 doubt it matters when hayden fabricates and welds/bends tubing all day everyday as a living and has done cages for years. Plus he said hes getting the tubing from kyle to do it himself

That thing needs a cage. Love how far this build has come, keep it up man!

its like watching beavis & butthead, just they're into cars

When they say dont bring it back is what makes a true street racer!

Good for you brother! You met your goal! That car came a long way brother! You be pat yourself on the back and be proud of your hard work!!!

Never mess with the ebay turbo boys🔥 I guess you need a ebay roll cage than your bullet proof !!!

@jvh22a

4 жыл бұрын

That would awesome and scary!

@ryandowns1507

4 жыл бұрын

What's wrong with ebay turbos if you just check em once inwhile. Ive seen many cheep turbos last years

Epic video! Keep up the awesome content and this build on the off season. Would like to see your welding skills w the cage

idk why i havent been subbed... i love how you do your vids! def coming back ive seen you on boostedboiz but didnt know you had a channel! im hyped! love the rx7 build!!! keep it up brother!

first time watching any of your videos, and, even though I'm kind of a rotary butthurt, I freaking love this. And that 8 rotor plate? Genius.

thats kevin on the kart. My stepdads brother. Hes a great guy and has dragged all his life. All he is doing is looking out for you. I told you months ago he'll get you if you keep going fast. That's his job as directer of the track.

@joshfeister6566

4 жыл бұрын

Dude on the kart is one of those asshats who think they have some kind of power Trip lol he said he was getting a cage haha techs are like that here too wanna be more than what they are haha

@jameswallace1283

4 жыл бұрын

@@joshfeister6566 lol ummm he is the track director. He's a ass hate cause he is the one who helps wipe his ass off the track if he wrecks. Think about it if it was your track man. He is just doing his job, and that's to keep people safe and trying to keep that place open to let them do what they love to do. I talked to Kevin this morning and he said they are more than welcome to come back the second they get a cage in that car and get it through tech.

@MrRosentrotter

4 жыл бұрын

James Wallace everyone takes safety too seriously. Relax please, if he wants to risk it thats his risk to take. Hes on a power trip lol

@Ricky-nq7lu

4 жыл бұрын

He's there for the safety of all at the track guy's so chill as the man was just doing his job. Plus anyone with a brain that works would know it's should have had a cage built into it when you built it full stop. I've had to clean body parts up off the track guy's an it really messes with your head knowing that was someone's son so i stand with Kevin on this.

@TheAbstracTSniper

4 жыл бұрын

@@MrRosentrotter it's not just for his own safety but for those who are at the track as well. There's a reason for everything.

That car is a beast. Good job! Keep up the awesome work man.

Love y'all in videos together! Hilarious. And heck of a build.

Mad respect to you and wyatt for doing your own thing with different style. Like for real if I had a chance to hang out with the group I feel like honestly you and wyatt are my people because you are real.. I know the other guys try to keep it clean for viewer numbers but I'd rather hang out with people I know than people who put on a show.. stay true to who you are..much respect.

Brother I really enjoyed the hype and excitement you show in the one. I can only imagine the feeling.. I had to sell my mustang right after I rebuilt it from the ground up.. my babies needed a newer safer car when the daily died... Never got the chance to run it..super happy for you man

Congrats man that's awesome, can't wait to see you put the big one to use!

Wyatt is the man!!! Can’t wait to see his duramax build!

Awesome bro!! Congrats on those fast passes and it’s only gonna get faster. 👏 👏 👏

Dig the ride and dig the excitement! Just earned another lifetime subscriber!

God damn it son.. you knew this was going to happen. Good job by the way... especially ducking out and loading it straight into the trailer. Lol

When you look at it from the track manager's perspective, the track has the responsibility for not allowing a car without a rollcage to go over a certain speed. If the driver wrecks his vehicle and hurts or kills himself due to not having a cage, as far as legality goes, the track is liable and the drivers family has the potential to sue the track for a hefty sum. All of that to say, the old man had good reason to give them a stern warning. His job is on the line in a situation like that. In today's age, a track owner could randomly watch a YT video like this and see that a driver was being allowed to run too fast without a cage and the track officials did not do anything about it, then the next thing you know, a manager or employee is let go.

@wpgspecb

4 жыл бұрын

ya - fuck Metigulous

@superbarnie

4 жыл бұрын

Don't the tracks make you sign a waiver to remove any liability on their part?

@michaellinn243

4 жыл бұрын

If they do sign one I would think it would still harm the tracks reputation and also I would hope it's more about them caring about human lives and not wanting innocent people dieing and destroying families because they allowed it to happen

@Fluff304

4 жыл бұрын

The drivers sign a liability waiver. What DOES happen is that the track loses their NHRA certifications, so no more NHRA events there again.

@dimmn82

4 жыл бұрын

A waiver form doesn't hold up in court. The judge will simply say they shouldn't have been allowed on the track. It's a liability issue. I really don't see what people don't understand about this.

That's a good feeling!! kicked off for going too fast!Better than being kicked off for oiling the track down LOL!

Finally a cage, time to make a deal with a roommate

Lol that 9.6 @ 96mph was awesome, great video

@bradross1188

4 жыл бұрын

9.96 close enough though.

God dang Hooligan. No roll cage upsetting the old folk.

@MrLarsgren

4 жыл бұрын

about time they stopped it. next video should be about cage building

@freedomfox8183

4 жыл бұрын

@@MrLarsgren they only stopped it because their insurance and they don't want to be liable if he gets hurt or worse.. but for 1/8 mile he's not going that fast normally so he has been good ..

@MrLarsgren

4 жыл бұрын

@@freedomfox8183 its still more fun to race a caged car than beeing scooped out of a uncaged one. kzread.info/dash/bejne/fp6h2phwfduvado.html

@wombatonsteroids

4 жыл бұрын

They let him run for a LONG time without a cage. Honestly the fact he passed tech so many times with this car is amazing.

@freedomfox8183

4 жыл бұрын

@Ada 1812 a lot of smarter folks who don't want to see him hurt or die.. running the 8th mile is one thing because you got out before you get above 110 * 120.. if people didn't care about him they wouldn't say anything

GOD DAMN ! THAT THINGS A HELLRAISER . Time to beat up on your boosted Bros . Lol

Congrats dude! Really keen to see what this thing can do in the quarter.......or in Mexico....

Congrats!! Awsome you shut down all the haters. Love cars like this!! Super budget, junkyard dogs, inspiration to a lot!! Get the cage now.

Doin it big!! Congratulations from Chile bro

Man this is one of y'alls best videos Wyatt is funny af. Kyle gotta hook you up with a cage. Hayden get the heat sleeves for the wires. That was fun cause I remeber the beginning of this build then I rember blowing up the motor at pfi speed shop. Now the rx7 is a beast. Thanks for posting. ✌

3:30 did you say they’re not as worse as the other ones? Lol I’m dead😂🤣😂🤣

Hell ya Hayden that was sick! Was also nice to see Roman make that 9.45 I had predicted 9.48 @ 149 I was close lol

Dang dudes wish their were friends to race together . Great runs 👍 I will be keeping with y'all awesome job !

love the videos brotha keep it up

That rx7 hauls that azz tho.Man . The boosted boiz sounded like Rick Flairs cheer team when they yelled woo at Romans last past. Looked like a great time, had fun watching it all! Thanks for sharing!

I’m building a 84 rx7 with a 5.3 and gt45 eBay turbo. Nice to see u going fast with pretty much the same style. I have a th400 behind mine and will be using a 8.8 now that Iv seen this video. Sweet car dude

Hell yeah guys!! Well worth getting kicked out for sure. Best video in a while

Hell yeah bro!! Stoked to see that 9!!!

Awesome setup!

Great job man! As Red Foo sung LETS GET METIGULOUS! WOOT WOOT!

Congrats Man that was great !!!!

Didnt know about you guys. And first video i see yall watching cleeter. Subbing for sure

Ok now you just seen the wisdom of having more than one set of eyes looking at your car you can do everything yourself but it's always good to get a second third fourth fifth opinion. on that note good job man that was awesome to see I just subscribed to your channel and can't wait for you to run 8

yo so I am a computer engineer w hella electrical engineering & integrated circuit experience. What you could do if you wanted to keep the ECU setup you have now but with 2 seperated up/side pipes (instead of them joining into one so you can use 1 o2/wideband sensor) is have me or some dude build you a little box to plug the 2 o2 sensors into and then what it would do is constantly add the two voltages together (sum them) and then divide them by 2 (which can be done with a simple resistor or other setup) aka average the reading between them, and then plug that into you ecu so it looks like there is 1 o2 sensor to the ECU and you will have the same ECU side logging abilities w/ the banks combined/averaged between them that you have now but then gain the ability to put 2 dyno-type wide bands in there to get accurate per bank wideband readings. just a little "im high, just got off work, and want to see the homies do good" idea rn lol it would be a super simple circuit setup and you wouldnt have to change your ecu setup at all to do it, just add the box in-between the 2 o2's and then have a single wire to the ECU but it would give you the ability to do real per bank logging at the dyno + give you the ability to just toss the box if you go after market ecu and plug both o2 sensors into it. All that's required on your side is to make 2 up/side pipes which you obviously can knock out. just tryina give you ideas how to go up from your current setup in steps.

@brianwellingtonlewis

4 жыл бұрын

lol, a couple resistors will get it done as well. No need to break out the OpAmps.

@von...

4 жыл бұрын

@@brianwellingtonlewis I just have hella FPGA experience so I am so quick to pull out the "lemme build you a black box" integrated circuit thing. I am sure if I looked at the output signals of his o2/wideband sensors + the signal the ECU expects there could be a simpler solution like a resistor but if you do it on an FPGA you could program logging both banks' AFRs into it's IC pretty easily that's separate from the probably pretty limited logging on the stock ECU he is using (along with a much higher sampling rate to detect ignition, fueling, or sensor issues easier), but that's making assumptions about his ECU setup I don't actually know.

@Cekmore

4 жыл бұрын

Oh talk Nerdy!🍻🐈🔥

Congrats on the 5's, About to finally start up my turbo ls rx8.

@SXJEREMY

4 жыл бұрын

Deffs show us a video. That sounds pimp 👌🏻👌🏻

That thing is Dee ee eecent! awesome to see you smashing it Man (Y)

Just found this channel. Right on bro I'm subbed now

Loving the sick RX7 content finally sending it 😍 🇬🇧

Cool video! Thumbs up and subscribed. Keep it up!

Sick Bro!! I knew you had a fast car

Nice vid... great job fellas

Awesome video! (I'm still getting the tweaks out of my car)

Awesome brother cant wait to see what you put down when you don't got to hold back

HELL YEA BRO! GET IT!!! Subscribed!!

Hell yeah mang That thing rolls out! 👍👍from this guy

This is getting interesting. Seen some of Hayden's videos before, but always felt like whole build thing was a bit slow compared to boosted boiz. But hey, finally there - great job. Worth subscribing to see some ass kicking on the track :) .Get that roll cage and let's go.

My heat sleeves had that ring too i just put some pliers in and opened them up something and then poke them out and twist them out i guess those are for like making your own wires

Congrats on the time! What does that thing weigh again?

Congrats bro it's fast af

Congratulations. Good racing.

Really happy for you brother proud of the car

That better be a 7,5 sec cage cause you'll be flying by next season!!! :-) ;-) Awesome job guys!! That thing rip's!! Look at the wheely's it does!! Love it!!

I was in the stands for the last run and told my buddy they were gonna kick you out after that one lol good run

I like this guy. hes cracking my up.. real dude for sure

Good content man, can't wait to see this get a cage, and hopefully hit the 8s :-)

Congratulations hommie.

I cut the metal rings out of the heat shields and used 2 inches of 1" heat shrink on each end to keep em from fraying and it holds it in place as well...

Someone welding as good as you i dont know why the hell you didnt put a propper cage in.

@slav7447

4 жыл бұрын

hes an idiot..........

@arcadiagreen150

4 жыл бұрын

Being able to weld and being able to plan cage geometry are two very different things. It's seriously not easy.

@Zach-gg6ct

4 жыл бұрын

@@arcadiagreen150 you think making manifolds doesnt require any geometry? if anything its more tedious because of the smaller welds and the planning of the shrink.... Plus Kyle even said he would help him in his video... NO EXCUSES

@okobojian1860

4 жыл бұрын

Hey ever heard of money!!!!😎

@JoeCurtis82

4 жыл бұрын

@@Zach-gg6ct yes and no........the thing that makes building roll cages difficult isn't the design of them..it is the bending the of tubing that's difficult as those mandrel pipe benders (thats if he even owns one) despite looking proper easy and straightforward ain't easy to use....its not just a case of knowing the angle you want and bending it..trust me

Here for the (i told you so) comments 😁

@freedomfox8183

4 жыл бұрын

Yea most of them Because they heard Wyatt say it..they were his old plugs to begin with..

Congrats on the 5's

Impressive, well done boys 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

Well done bro looking good!!!💯👍👏

Will you go 8's before sloppy mechanics. Lol Great work!

does that care have latter bars if so you need yo build the roll cadge and connect the cage to it and to the front shock towers to it this way the whole frame and roll cadge is connected and stiff so you can start lowering the 60ft and do wheelies starting a 100ft out

That guy looked like he would have been the uptight hall monitor in school. 😂🤣

Next video better be a cage or we wont watch until you do! Lmao good run tho dude!

Congrats on your 5 you've been after .. that's moving..

Congrats on the 5's man.

The build is great, with smaller turbos in a light chassis, shit flies. Once you do have a cage, what I would do, is cut up a hood, to fit around the engine setup but leaving open space for your turbos to eat air, and do some under-carriage paneling, for drag efficiency. It's an insurance thing, they don't want to have anyone die up there, looks bad on them, the could get shut down if they're not holding people to the rules. Regulations in a blue-state, are harsh already, they'd love to shut down a drag-strip, it's in their DNA(it seems). Just wished we could see a full 1/4th mile pass, with a cage, is all, because I know that car is fast af, always knew you could build a fast car with that setup. Never once doubted you about the turbo choice. I'm a fan of smaller turbos myself. Just want you to not get kicked out or hurt.

Does anyone know from previous videos if is using turbo manifolds or the stock exhaust manifold? Please and thank you!

What's the build on the whole car. What's the specs on the rear.

This was an awesome watch!

Still think big single turbo would be sick mount it behind the headlight so when u wanna race it u pop the one light up and bam there is the turbo captain ebay spoolie boy 🙋‍♂️🇦🇺

Congrats on 65k.😎

Congrats hayden

Found you through the BoostedBoiz. That rx7 is sick

Damn bro she's getting it done. Congrats

Hard work pays off good job

So what would it run if you did a whole 1/4?

"I'm not saying we told you so, but WE TOLD YOU SO!..."

Killing it keep it up

Congratulations on 5's cheers

"I gotta kiss ya bro!" Hayden 2019

He way you’re going you’ll need an 8.50 cert soon😂😀

Congrats!!

Subbed........respect from AUSTRALIA 👍😎

FUCKING CONGRATS DUDE!!! That baby fucking moves, cant wait to see it with a cage going full tilt down the track! Cheers