I bought a prebuild with this case and I'm very happy with it. It's not a huge case but it does stay cool. It also looks great.

Man, I am lucky, I prefer zero RGB.

@sykojuice9669

6 ай бұрын

You’re not alone

@garinta1296

6 ай бұрын

I liked rgb but they way over price it

@UnknownMoses

6 ай бұрын

@@garinta1296 I would pay more to not have rgb but that is my preference

@freefall_910

6 ай бұрын

RGB trash on your face in dark room

@Farrcast7

5 ай бұрын

I have this case with 2 sticks of rgb corsair vengeance ram and the deepcool ak500 digital. Its absolutely minimal rgb with an all black design

I agree with your statement about simply leaving out the inexpensive fans and reducing the price of the case by several dollars. Every case I've ever used, the first thing I do is to remove the stock fans and replace with better PWM fans (I like using Noctua fans). I have a box filled with fans from prior cases I've accumulated over a couple of decades, keeping them in case a fan fails I will have a temporary backup. Otherwise, I have liked prior Corsair cases I've used and am considering replacing my current case with either the 4000D or 5000D case just to have easier access to my front filter for cleaning. My current one, I have to pull it to a point it hangs over the edge of the desk in order to get my hand underneath the front panel so I can yank it off to get to the filter. Sounds easy, but I can't take the front panel off due to wires connecting the front RGB and the front I/O jacks connected to the panel, so it has to either hang there or put back on and then removed again to replace the filter. Just too much hassle so I don't clean the filter as often as I need to.

Good overall review. I'll keep this case in mind for midrange builds.

@TechHunterOfficial

10 ай бұрын

Thanks for the second comment 😂! My next review kinda helps to show the actual value of the 4000D

Built in this case for my first build, 7800x3d, 4070 ti super, replaced the fans with be quiet silent wings 4 pros, and it’s been fantastic. Legit 0 complaints, love the build

Your review is the first I've seen that actually talks about the piece @5:04. I wasn't sure it was blocking air flow or not. Nice review.

My first build is in this, i think its a solid choice for a case. Only thing i wish it had would be for the glass panel to be able to swing open and not be screwed in with the screws. I didnt use the stock fans though i bought some arctic fans instead

@TechHunterOfficial

8 ай бұрын

They offer great bang for the buck fans arctic, good choice

@SirLouisDavid

8 ай бұрын

What model are they?

@rahovartiv3464

8 ай бұрын

​​@@SirLouisDavidarctic p12 120mm 5pack, their cheap in price but very quiet.

@pierrerocher8118

2 ай бұрын

@@rahovartiv3464 thanks mate , what is your confi and are these fans still good ?

@rahovartiv3464

2 ай бұрын

@@pierrerocher8118 ryzen 5700x, gigabyte oc 4070 ti, Kingston fury 32gb ddr4 Fans still going with no problems

Just watched the 3000D video, this has so much more to offer

Just built my computer today in this case. As a student i had to do some budget cuts so i got the cheapest motherboard i could which meant a micro atx :). It was a pain in the bum everything was so small and compact, and my nh-d15 cooler just took over the entire build basicly. Looks sick though and runns any game i throw at it. Good case, easy to use but i would recommend getting better fans since the ones in it are decent as a start.

Dude, your quality is insane, greeat job!

@TechHunterOfficial

8 ай бұрын

Thank you so much 😁!

My favorite part of the case is the tinted side panel. Looks so slick.

Built after 15 year break a I7 G4 + machine / my hasn't tech got more complex, e.g., GPU, Storage, etc. Thanks for video.

Just bough one of these cases before Christmas. When it arrived and I unpacked it I was a bit miffed to find the glass side panel didn't seem to fit very well. When screwed in at the rear it left the front sitting too far back so the panel couldn't hook in at the front. I realised the reason was because the small steel strip that the screws pass through was bonded too far forward, there was actually a 5-6mm overhang of the glass panel, whereas it should be flush. Needless to say the supplier is now sorting this issue out for me and supplying a replacement panel thankfully, this was not their fault and to be honest I'm very grateful for their help. At this price point I'm a bit disappointed with corsair. Apparently I'm not the only person to have had this issue with this case. It's a shame because other than that it would still be well worth the money. 😕

Great review!

@TechHunterOfficial

8 ай бұрын

Thank you!

I appreciate overall review , any Micro case you recommend ? Thanks

i own this case and a fractal design meshify, personally i prefer the fractal. more solid and comes with 4 bigger fans

I just bought one in white. 🔥

Love the sleek black color of this case. I color grade, do not want random streaks of purple and green lights peaking from the corner of my eye.

The audio quality of your video is superb. I'm looking at the 4000D myself but since I have 2 HDDs to stuff in there too, it might be a squeeze.

@TechHunterOfficial

4 ай бұрын

Thanks 😁! Might be a squeeze indeed! But it's definitely doable ☺

I just built my 7900xt, 7800x3d build with this case with no rgb. Only light was the XFX logo on the 7900xt. Looks so damn sleek and stealthy I love it.

@TechHunterOfficial

10 ай бұрын

That sounds like an absolute beast of a PC, what games you playing on it?

@cafub2650

9 ай бұрын

It’s a great choice for that black out build. Love mine.

@KS-nm6rt

9 ай бұрын

How are you cooling the CPU.. Was gonna go with 4000d, but then I saw the 5000d and how the 4000d won't let you install a 280mm radiator top without picking the right RAM.

@jwat8400

8 ай бұрын

@@KS-nm6rt Noctua NH-D15 will fit, amazing air cooler

@MineWiz117

4 ай бұрын

I'm also building with the 7900xt and 7800x3d. Did you upgrade the fans or use the included ones?

I got the 5000D a couple of months ago. Very happy with case, glad it doesn't need the lousy Corsair support.

@TechHunterOfficial

10 ай бұрын

The 5000D looks like a great case, hopefully I'll get the chance to look at that in the future, or whatever Corsair replace it with :)

Thanks! Just bought the version with 3 rgb af120 fans for $120 usd, free shipping. Or 96 pounds

Hello i want to buy this case but you think the Deepcool Assassins IV will fit??? great video

Corsair makes beautiful cases.

4000D 4000X PC case is the affordable alternative version of HYTE Y70 is affordable. I bought and DIY installed a perfect fitted touch screen monitor from Amazon to display the CPU GPU temperature datas, The effect exceeded my expectations. With this fancy monitor, I believe i will use for years.

Great video - how easy is it to install HDD in this case ?, on my current build (Different case) the PSU and HDD were tightly together and was fiddly in putting them in tight space. Is it better going for SSD M.2 + 2.5" SSD instead and using High capacity 3.5" HDD 10TB+ as external drives instead ?

I've been looking at this case, unfortunately, I'm still looking for at least two 5.25" bays. That said, why can't I find a case with a tempered glass side panel, 5.25" bays on the front and top grid for top radiator mounting.? Can you suggest any? Great video btw. Impressive delivery.

I got one Just yesterday. Was a nice special on it. Now I just need to transfer my system to it.

@TechHunterOfficial

Ай бұрын

Good choice!

Its on sale with a great psu for ridiculously cheap right now

I need to know the temperatures of this case or the 5000d with phanteks T30 fans

I have the 7000D AirFlow for 2 years now. It is by far the best case Ive ever had. I still have my Crosair 750D for my backup PC. The second BEST case Ive ever used.

@TechHunterOfficial

2 ай бұрын

I think it'll be a while before I can buy a >£200 case for reviews unfortunately 😂. But I'd love to try it out one day! It looks super premium

Wanted it for my build but its like 100 euros in my country. I chose the Phanteks G300A instead for 70 euros. Both are great choices if found at 70 euro price tho!

One thing I've noticed is that iCUE 4000D/5000D airflow variant has less tinted tempered glass as compared to the previous versions of the case. Is that me or anyone else noticed that too?

Yeah that's the case I ended up with as my third choice. The other two wouldn't ship at the same time as my other components. It was fine once I got the components installed but I wanted to adjust something inside and pulled the tempered glass side. The corner of it hit the desk and shattered : |. I called Corsair support and had them send me the right hand metal panel instead since I realised that it was usable on both sides. I had no RGB whatsoever and even turned off all the lights on the motherboard so the tempered glass was useless for me anyway. Other than the shattered glass its been a great case. I have 2 Phantex T30's in the front and BQ Silent Wings 4 exhaust at the back and on top at the rear pulling heat off the Noctua DH15S atop my 5900x. I noticed the restriction with the top mesh as well. So I just placed a pencil under it directly above the fan to give more breathing room. I Also have a 2060 GPU for now. when I max out everything with Cinebench 23 and Heaven for the GPU my temps top out at about 78C for the CPU and 74C for the GPU.

@TechHunterOfficial

10 ай бұрын

That's a shame about the glass, but I agree, it's so dark you can't see inside anyway so the solid or glass panel doesn't matter. The t30's are great fans, I'd like to get a couple of them in. Haha I like the pencil idea with the dust filter! Good thinking

@gameotic1

6 ай бұрын

​@@TechHunterOfficialicue 4000D/5000D airflow has less tint.

You said you have reservations but all I'm hearing here is that it's a thing of beauty and that I need it.

@TechHunterOfficial

2 ай бұрын

Haha give in to your deepest desires

i like the 5000d bc of the space in the back.

In the US, may want to check the Montech 903 Air Base/Max(RGB) $65/$75, the Antec DP503/505 $80 or the Cougar Duoface Pro $100

@TechHunterOfficial

9 ай бұрын

I've looked into the montech but they're so difficult to find in the UK

You have the exact same wallpaper as me lol

its good for airflow if your pc getting hot take the top dust filter off

My current build is in this case. Love it so far, but I'm considering the 5000D for my next build.

can you show the zero rgb build you have for this case??

How does it compare to Thermaltake s200 tg in air flow?

So I made the mistake of buying an Asus STRIX RTX 4070 ti to replace my Asus TUF RTX 3070 with my current setup. I have a NZXT H510 Case with the Kraken X63 Water cooling, would this case be able to fit both the RTX 4070 ti and the Kraken X63 (either at the top or the front) with still enough space?

If the 4000D and Lancool 216 are the same price, would you recommend the 216? I've not understood what makes the 4000D so amazing to always be the top seller on amazon. Also, wondering if you have any thoughts on the Asus Ap201 as that's also on my short list

@TechHunterOfficial

8 ай бұрын

AP201 is a fantastic mATX Case and looks really clean once you're done with it. The Lancool 216 is also a really good case too. The 216 probably has more niche features to make building easier but I think it looks a little boring and cheap.

I got it it’s cool

RGB is getting tired, IMO. I appreciate that Corsair made the glass so dark you wouldn't know it was glass unless there were lights on inside. I wish Corsair, NZXT, etc. optioned windowless cases. I believe Fractal does.

Corsair makes the best stuff, also the customer service i can say is the best.

@TechHunterOfficial

10 ай бұрын

Check out my video on the 3000D, might change your mind 😅

I heard you can put a 360 mm radiator on top no?

Hi im looking to build my first pc. would u recoommend this case or the cool master td500?

@TechHunterOfficial

10 ай бұрын

I’ve not tried out the td500 yet but I’m looking at getting one in. I think the 4000D with some more fans is a great option though

The case looks nice but I find it weird that the bottom dust filter has a grid to stabilize the mesh while the large front filter has not. I'm afraid that the plastic mesh will weaken with time and use and will touch the fans making noise.

I just wish that they had an option to have a metal side panel instead of glass.

Thanks for the video! I have bought (but still waiting to come) a Liquid Freezer III - 360 for front installation and planning to remove the front pre-installed fan and take it to the top and also buy a new Arctic P14 PWM PST. Tell me , please , if Arctic P14 PWM PST will narrow the space for my "MSI - MAG B650 Tomahawk WIFI" together with a "G. SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s " or should i better buy a Arctic P12 PWM PST??? Also , is it a good setup at the top this one i mentioned (preinstalled fan together with this new one)??? Thank u very much!

@TechHunterOfficial

3 ай бұрын

The liquid freezer 3 is a beast! Good choice. Personally I'd say just grab all 120mm arctic p12 fans. Ditch the pre-installed ones, they are awful compared to the Arctic ones. If you want 140mm fans they should be okay up top no problem. Just install them at the very end as it'll be much easier. They screw in from the top anyway

@konstantinoskrit

3 ай бұрын

@@TechHunterOfficial That's really good. One 120 ( the pre-existing) together with a 140 on top , is it possible or some problems will be created ? Thanks again for your answer!

@TechHunterOfficial

3 ай бұрын

It won't create problems but will just look weird 😂 I'd recommend 2x matching fans up top for just for my OCD peace of mind

can you make a video about the undervolting?

@TechHunterOfficial

6 ай бұрын

I might look into in the new year ☺

What about the 5000D Airflow?

Got my 4000D with x3 PWM RGB fans w/ a 850e PSU installed.

@TechHunterOfficial

8 ай бұрын

That sounds like a great deal!

@GalacticStudiosInc

8 ай бұрын

@@TechHunterOfficial I figured too although i swapped both instantly

Subscribed and would like to see an AMD undervolting video!

@TechHunterOfficial

10 ай бұрын

Thanks for the sub, I'll definitely work on it soon!

Love your lighting 🤌

@TechHunterOfficial

10 ай бұрын

It's taken me a long time to get it somewhere I'm happy with 😂

Thoughts on the Lian Li 205 Mesh C?

@TechHunterOfficial

10 ай бұрын

Not tried it out yet, I might have to. You're the second to ask about it 😂

Thoughts on what fans I would need on this case to use a 4090 without heat issues?

@TechHunterOfficial

2 ай бұрын

Honestly a 4090 is so over built it wouldn't even overheat with just the stock fans

It’s a great case me and my wife both have this case I have the black one she has the white one,the white one has a see though glass panel great cases and we’re very easy for me to build in

@TechHunterOfficial

10 ай бұрын

Yeah I think I really prefer that with the white, would be nice if there was a dark tint and lighter tint for both

could this case fit a 4080 super tuf oc

Lancool 216 for me.

Please do NZXT H5 flow in white !!! My next build is gonna use it I think

@TechHunterOfficial

10 ай бұрын

I do like the white, looks so clean - I think I will have to :)

@LBenn302

10 ай бұрын

@@TechHunterOfficial heck yeah it does! I’m doing the h5 flow in white, 7600x with a 7900xt, 32gbs ddr5 6000mhz, and a kraken rgb liquid cooler with some rgb fans sprinkled inside. I’m very excited :) just debating on the Nzxt h5 flow or the Lian li 216 rw in white

@TechHunterOfficial

10 ай бұрын

@@LBenn302 sounds like a great solid build. I have used the 216, the fans do have an annoying noise at low rpm, but it's got great airflow and super easy to work in. I definitely need to order an H5 flow for review then 😁

@LBenn302

10 ай бұрын

@@TechHunterOfficial heck yeah I subbed 👍🏼

Hi, I am planing to move my build from a Crosair Air 240 into the 4000D because of the case restrictions of the Air. My question is, can you mount 3x 140mm fans in the front or only 2 ( i know it will work with 3x 120mm). I have some Noctua Redux 140mm that I don't use and it will me great to know if i can use them all. BTW I have an R5 5600 and a Sapphire Pulse 6800xt. Also i was torn between the Fractal North (121 Eur on Amazon) and this 4000D (60 Eur on Amazon). Thanks

@TechHunterOfficial

9 ай бұрын

Just 2 x 140 or 3 x 120 at the front unfortunately!

@KS-nm6rt

9 ай бұрын

Fractal North is apparently quite noisy? Had it narrowed down the Fractal North or Torrent, but then I saw a GN video and despite the good review, it's quite noisy like 50db when the 5000d was getting 35db..

@Drakar1122

9 ай бұрын

@@KS-nm6rt yes indeed that is also what I was concerned about as I am that type of person that usually undeclocks his components for a more quiet build :). In the meantime I have managed to find (in the part of Europe that I live) a second hand, which was actually new and never used, BeQuite dark base pro 900 for 85 euro and I went for that. Is a bit bigger that what I was planning initially but I am very happy with the cooling potential of the case and the low acoustics comes as an added bonus.

@KS-nm6rt

9 ай бұрын

Thanks for the reply. Will have a look at the BeQuite cheers. @@Drakar1122

Corsair 4000D case airflow white version has clear glass opposed to smoked glass and looks amazing with motherboard contrast and some RGB lighting really highlights everything inside . There are some limitations with the 4000 series compared to the 5000 series as with top mounting a AIO in the top, 240mm would be the limit for the top compared to a 360mm advantage in the 5000 series but I guess if your building a mid-tier something like a i5 13600KF -14600KF-7700x then a 240mm AIO would be fine. A 360mm can fit in front but I prefer top mounting a AIO .

@TechHunterOfficial

5 ай бұрын

I prefer top mounting as well. Looks a lot cleaner imo. I like the white, the grey and white contrast nicely. Doesn’t force you into feeling guilty about not having an all white motherboard, gpu etc

Great video, I wanted to know if the MSI Radeon RX 6750 XT is a good option for a gaming PC Build. Mainly I use it for PUBG and Forza. Here is my Build plan 1. Usage/Usecase : Gaming, Basic video editing, PUBG and Forza are my major games. 2. Configuration (if any ) : GPU : MSI Radeon RX 6750 XT 12 GB CPU : AMD Ryzen 7 7800X3D Motherboard: ASUS TUF GAMING B650-PLUS WIFI RAM : DDR5

@TechHunterOfficial

7 ай бұрын

If you're planning on using the 6750 xt with a 7800x3d then the CPU is a bit overkill for the gpu. You could get away with a Ryzen 5 7600 quite comfortably or R7 7700

@dronefilmsgermany

7 ай бұрын

@@TechHunterOfficialthanks a lot I’m planning to use it for five years minimum so I’ll go with the overkill no worries

@triliner254

6 ай бұрын

​@@dronefilmsgermany I think he meant to say it's actually redundant. If you get a 7600x, you can spend that saved money for a better GPU, for example a 6950XT.

Is there any mid tower case that can fit my 16 inch graphic card

@alhemmings8554

7 ай бұрын

Fractal pop air, Coolermaster td500?

Does it coming with default fans or I have to buy then separately?

@TechHunterOfficial

7 ай бұрын

It has 2 basic fans included by default

Why is there no more usb-a??

I have this case and i am studying how many fans i should put in and how should i install them... i know it needs to be close to neutral but a tad more positive.. so more intake than exaust... so now i know i will put the 3 fans in front and try and test to take off and on that lil ledge at the bottom front for more airflow to my gpu... i will also try to compare with only 1 fan at the back vs 1 at the back and 1 on top both exaust to see if i see drops in temp. the 6th fan i think is just not good as if you instal it for exaust it will kick the air out before it even reach the cpu so i think its better to leave it out/unplugged or even make it as a 4th intake fan but i do not like making a top fan an intake for the dust reasons and my balance will be more off as i will have too much intake vs exaust... this is more complicated then i first anticipated to have the maximum out of my investment but it is quite interesting... so conclusion i think the best will be 3 intake in front with or without the small pannel/ledge and 2 exaust one at the back one on top as far back as it can go.. hopefully my GPU will receive enough air that way as i will get closer to a neutral setup as it can be.

@TechHunterOfficial

9 ай бұрын

That was a long comment but I read it all haha. I think start with 3 intake at the front. 2 exhaust up top, and 1 at the rear. Then you're completely neutral. You could also use 140mm fans too, they move more air and at lower speeds than 120mm fans

@maxym189

9 ай бұрын

@@TechHunterOfficial I won't be neutral as my GPU also pushes air out no? Oh and i already have 6x 140mm, my concern is that the top one that is more to the front seems to be a hindrance as it blow the air out before it even reach my pc parts. By the way thank you for your answer it is appreciated !

@TechHunterOfficial

9 ай бұрын

Your GPU will generate a lot more heat than it'll exhaust. What cpu and GPU are you using?

@maxym189

9 ай бұрын

@@TechHunterOfficial CPU : 5600x overclocked to 5Ghz turbo with a freezer 34 Esports Duo. GPU : overclocked 4070. Mobo : Rog Strix B550-F Gaming I am now running 2 fans front (the two lowest) and one at the back (lowest it can go as it is a little adjustable). It works amazingly well. Lowest temps I've gotten so far. Tomorrow I receive the missing wire. I will be able to test with 4 and 5 fans configuration as well. I will update you on the results if you are interested. I will not be putting the 6th fan in as I am pretty certain it will make it worse to have a fan exhausting air right before it reaches my CPU cooler. I could try it as an intake fan but i dislike the idea of having a top fan blowing down as the dust filter isn't as good as the front one plus it would create too much positive pressure. I am excited to test it tomorrow. Thank you again for your amazing videos and for your interest in this matter. I did not expect this level of complexity when i first started to read about this. It is a fun ride !

@maxym189

9 ай бұрын

@@TechHunterOfficial I would really appreciate if you could please confirm that i can indeed plug my 3 front fan into a single mobo fan connector using a splitter cable? So far my researches says yes but I would like a professional opinion. Thank you again for your time.

Would you recommend this case or and others for beginners?

@TechHunterOfficial

10 ай бұрын

100% it's so easy to work with an upgrade in the future

@Fahad_Ali243

10 ай бұрын

⁠@@TechHunterOfficialthank you. I also have another question. I am planning to build a pc which contains a 4070, which processor and type (ddr4 or ddr5) of ram should I use with the 4070?

@TechHunterOfficial

10 ай бұрын

@@Fahad_Ali243 I think the Ryzen 5 7600 or 7700 is a good bet, with 32gb ddr5 at 6000Mhz

@Fahad_Ali243

10 ай бұрын

@@TechHunterOfficial thank you!

@KS-nm6rt

9 ай бұрын

Promise me you'll check out the 13600kf over the amd cpus. It is the best value buy all around but yeah if you're gonna upgrade the cpu the AM5 platform is more future-proof, but still @@Fahad_Ali243

Im looking to change my pc case of my nitro 5 prebuilt. Can the motherboard be in? Intel Chipset B560 Socket LGA1200 Desktop Motherboard I believe this is the motherboard. Thank you.

@TechHunterOfficial

8 ай бұрын

I believe so, as long as it’s a regular motherboard with all the screws and I/o shield in the regular place and not an OEM Motherboard made specifically for that case

Im a beginner, sorry idk anything about all this pc stuff but, if a want fans of it, do I have to buy them separately?

@z-lightningztutorials8400

10 ай бұрын

Yes you would need to buy them separately. But do more research on the type of fans so that they fit properly. ID reccomend sticking with a corsair fan for the case but someone else might know more and give a better reccomendation.

@juancuadros2750

10 ай бұрын

@@z-lightningztutorials8400 thank you, I’ll research about it

@TechHunterOfficial

10 ай бұрын

Yeah you will need to buy separate fans, the Deepcool fans I recently checked out worked perfectly!

Would you recommend this case or any other one

@TechHunterOfficial

9 ай бұрын

Yeah I'd definitely recommend it. I've got another case review coming next week on the NZXT H5 Flow if you're interested

Yes, great case.

@TechHunterOfficial

10 ай бұрын

Thanks, hope you liked the video 😁

There are 3 of these different models in the house, they are built great, but weight a ton. Specially if you have lots of glass all around. Ventilation on some models is somewhat restricted, prepare for loud fans, I even have 2 AIOs on my personal PC. Stick to Intel AMD run hot, very hot and require fans at high speed to keep it cool even on the AIOs the fans will be running pretty high. I say again, spend a little more unless of course you don't mind noise or noise over noise to cover one or the other. They also come with a lot of metal parts that IMO are useless and they could cut costs and weight if they were to be removed. Just my 2 cents, after 50 years of messing around with computing and networking, I think they are worth it but could be better in many aspects.

Would an mATX motherboard fit here like ASRock B650M-HDV/M.2 ?

@TechHunterOfficial

4 ай бұрын

Yes, easily! You'll just see the cables at the bottom a lot more asily and it might look a bit uglier

I'm considering this against bequiet!'s Pure Base 500DX, can't make my mind up :/

@TechHunterOfficial

7 ай бұрын

I've got a 500 FX just come in, if you can wait a little longer I'll have a video about that ☺

1:53 Does the Corsair 4000D comes with front dust filter?

@TechHunterOfficial

9 күн бұрын

Yes it does 👍🏼

I want to use it with Arctic Liquid Freezer II - 280mm. I want to mount it on the top. Do you think this is possible? I don't know about the dimensions. Tysm

@TechHunterOfficial

8 ай бұрын

As long as you're using pretty low profile RAM you should be good! But if you've got some fairly tall sticks you might have issues with a 280mm

@tdtdtd1010

8 ай бұрын

@@TechHunterOfficial I haven't purchased RAM yet. What size ram would you recommend? For example, is Corsair Vengeance LPX 16GB (2x 8GB) 3200 MHz DDR4 CL16 suitable?

@TechHunterOfficial

8 ай бұрын

Yep the Corsair LPX RAM would be ideal!@@tdtdtd1010

Did buy Cougar duoface pro rgb insted. I like it more

@TechHunterOfficial

7 ай бұрын

That's a great option, I appreciate that you get both mesh and glass included!

@zeljkoklepac3180

7 ай бұрын

Only problem with it are the three pin fans connections - i cant plug them enywhere

@TechHunterOfficial

7 ай бұрын

@@zeljkoklepac3180 you can plug 3 pin fans into 4 pin fan headers ☺

@zeljkoklepac3180

7 ай бұрын

Pwm is not present on 3 pins - 4 pwm hybrid fan headers on mbo

Does this case not come with a fan controller?

@TechHunterOfficial

7 ай бұрын

It does not, just 2x 3 pin DC fans

Is the mech of the corsair 4000d airflow rides on my corsair 4000x rgb case because a have a bad airflow so I need this mech front for my case any one where to buy thir front mech itself??

@TechHunterOfficial

9 ай бұрын

I'm pretty sure you can buy them from corsair's own website

are the accessories always coming with the case? i dont think i got mine

@TechHunterOfficial

6 ай бұрын

Yeah they should be! Can't see why they wouldn't

@duckyxx1877

6 ай бұрын

nevermind, i just found them near the hdd compartment@@TechHunterOfficial

I don't like RGB so ya i love it

My case didnt have front panel connectors. Does anyone know where I can get them?

@TechHunterOfficial

9 ай бұрын

Surely just return it and get another case?

I have this case with my 30 series gpu z690 12700k. I still have it and works great. Now im having my 2nd pc build with the 40 series. Hopefully to save and build again

@George-um2vc

8 ай бұрын

Did you get your 4000 series GPU? I want to put a 4090 in this (one of the smaller models) but am not sure it will fit, also gonna top Mount the biggest rad this case will allow…

4000D vs Fractal North, What do you guys think?

@Dewane1511

3 ай бұрын

Fractal North !

@TechHunterOfficial

3 ай бұрын

I do like the Fractal North but it is nearly twice the price in the UK

It's still the best ATX case and for a while. I still have this case and i just cannot change it, Fractal North ? no, black are not true black, top are cheap mesh and overall it's an overrated cheap case. Lian Li ? no too ugly. NZXT = too cheap Honestly, i cannot imagine better design/noise/temperature case in a "small" format like this, my next case would probably a ITX case.

funny cuz my corsair fanes make my pc with the same case extremely loud

0:51 "and doesnt even include an exaust fan" "👶👶👶really?👶👶👶"

@TechHunterOfficial

4 күн бұрын

😂 That's how my voice normally sounds 👀

Corsair 4000D Airflow VS nzxt h6 Flow ?

@TechHunterOfficial

Ай бұрын

If similarly priced, I’d probably go H6 flow

Hello, can a rx7800 card be installed?

@anonymoose2474

Ай бұрын

Yes

I really wish it could fit 140mm fan in the back. Could get a 5 pack of arctic p14s and easy life. Instead gotta get a 5 pack, waste one (or hold it in reserve) and a single p12 fan. Annoying

I have two of them, along with a taller Phantek. My only complaint about the Corsair is that the PSU basement shroud isn't removable.

This might not be the perfect case but it ticks all the boxes for me.

@TechHunterOfficial

8 ай бұрын

Then that's all you could ask for 😁

Some of us dont like a rainbow puke party. I like the case and am happy i didnt have to pay more just to throw the RGB junk out.

Give it to me 😂

I've just changed my matx case for the Corsair 4000d and ngl it is s a air cool haven

@TechHunterOfficial

10 ай бұрын

Nice one, what case did you have before :)?

@Jb3rt_133

10 ай бұрын

@@TechHunterOfficial A Cooler master masterbox Q300l matx

What can you recommend? Torn between these two (4000D Airflow and Meshify 2 Compact). Meshify 2 Compact is slightly pricey but 4000D looks slick 😂😂

@TechHunterOfficial

8 ай бұрын

If you're adding your own fans anyway then the 4000d is probably the better option I think ☺

@yungjebuzx6700

8 ай бұрын

lian li lancool 216