Good video. I like the before and after on each part. I just bought a 180 last week. This gives me ideas. Thanks for showing.
@edwinladshow5791
9 ай бұрын
thanks for watching!
@BuckinBillyRaySmith4 жыл бұрын
good stuff
@edwinladshow5791
4 жыл бұрын
Thanks!
@minibikemadman
3 жыл бұрын
I did this on my 180cbe and she rips. Mine has the self adjusting carb and seems to be running on point.
@jbbolts
3 жыл бұрын
the man himself :)
@guly
3 жыл бұрын
what a fucking honor to have buckin billy comment on ur video, !!!!!
@litewatefitr2 жыл бұрын
Great video man! Nice work on the muffler! Thanks for the info!
@dereksheaffer6082 жыл бұрын
Love it man. Make sure you keep her clean!
@edwinladshow5791
2 жыл бұрын
Thanks!
@michaeldowling5590 Жыл бұрын
Puppies will help too
@rods.9885 Жыл бұрын
Get the intake side to work first , bypass the compensating carb and now you have a great little saw
@matthewcarroll31934 жыл бұрын
You should keep your let hand on top of the saw, for the saw stop to work.
@em4703
3 жыл бұрын
The chain break on this model is also activated by inertia, not like the older ones that only worked by your hand touching it.
@bungalily74304 жыл бұрын
Thanks! Prkongsian yg brmanfaat.Keep it up tompinai👍👍
@edwinladshow5791
4 жыл бұрын
Thank you!!
@markatkinson99632 жыл бұрын
Keep the chain sharp buddy. Nice video.
@edwardtatham424
2 жыл бұрын
Try a Husky xcut chain, you'll be shocked at the difference.
@jaw38952 жыл бұрын
Did you need to adjust the carb at all?? My older 018 didn’t have L or H jets. Do the 180’s have fully adjustable carbs?? I love my 018. A very underestimated saw. Put a .50 bar and chain and they are awesome, light, nimble, and fast! Use the right saw for what you’re cutting of course, but this is one of my favorites! Thanks for the vid, and nice work cleaning that muffler up. Dremel tools are an awesome invention!!
@edwinladshow5791
2 жыл бұрын
It don't have the L or H screw either,l just left it as it is.Thanks
@markatkinson9963
2 жыл бұрын
I thinks it's a fixed carb. If you do this you need to adjust the idle and rich it up a bit.
@madpogue
2 жыл бұрын
If I recall, if you remove the orange cover, you can see holes for the L and H screws in the carb. I'll have to look at mine again to confirm.
@jimreid96742 жыл бұрын
Nice wooden pancakes you made there. Hopefully the wood was maple.
@Sancarlos073 жыл бұрын
Dull chain
@MrIgottap
2 жыл бұрын
Sure does look like he’s leaning on it pretty hard, especially on the up cut. Maybe he just likes buying bars and chains
@pasha_1987_2 жыл бұрын
с новья отогнул рёбра на глушаке и забыл ,и не нужно изобретать
@javiermontes37772 жыл бұрын
What size chain you you got
@kudubudu5551 Жыл бұрын
Co to może być że na 1 zbiornik paliwa idzie pół zbiornika oleju? Nice dog
@bigbosssauce73 жыл бұрын
The way you cut scares me
@edwinladshow5791
3 жыл бұрын
I'll be careful next time😁
@kevinaalberts92513 жыл бұрын
how do you know how far to open it how much is too much, you cant add it back!!???
@edwinladshow5791
3 жыл бұрын
Idk actuly.I just do it whatever I think It will do and also by feel
@viperstrike3827
3 жыл бұрын
watch ironhorse he explains it well
@larryreno82933 жыл бұрын
How to get over 8k views... add puppies!
@Nunya-gk9fr
2 жыл бұрын
It’s a basic formula
@rods.9885 Жыл бұрын
all you did by eliminating some back pressure was to make it run leaner
@riswansundara45072 жыл бұрын
Kalo sepi nya panjang ataw kecil tolong penjelasan nya
@nilantonov39923 жыл бұрын
Daun
@kudubudu5551 Жыл бұрын
Jakie pompka olejowej?
@edwinladshow5791
Жыл бұрын
I dont understand this language
@jugular97864 жыл бұрын
Terbaik👍
@edwinladshow5791
4 жыл бұрын
Thanks!!
@headhunter44583 жыл бұрын
Good idea tompinai
@edwinladshow5791
3 жыл бұрын
Thanks!!
@headhunter4458
3 жыл бұрын
I try to make it..so powerfull bro
@vovakravchuk17653 жыл бұрын
How is it now? Alive?
@edwinladshow5791
3 жыл бұрын
Yes
@vovakravchuk1765
3 жыл бұрын
@@edwinladshow5791 shoot some videos with it if possible. Intresting how the dcb noise is now there compared to the stock one. Sorry for my mistakes in english, greetings from Russia👍
Пікірлер: 54
Good video. I like the before and after on each part. I just bought a 180 last week. This gives me ideas. Thanks for showing.
@edwinladshow5791
9 ай бұрын
thanks for watching!
good stuff
@edwinladshow5791
4 жыл бұрын
Thanks!
@minibikemadman
3 жыл бұрын
I did this on my 180cbe and she rips. Mine has the self adjusting carb and seems to be running on point.
@jbbolts
3 жыл бұрын
the man himself :)
@guly
3 жыл бұрын
what a fucking honor to have buckin billy comment on ur video, !!!!!
Great video man! Nice work on the muffler! Thanks for the info!
Love it man. Make sure you keep her clean!
@edwinladshow5791
2 жыл бұрын
Thanks!
Puppies will help too
Get the intake side to work first , bypass the compensating carb and now you have a great little saw
You should keep your let hand on top of the saw, for the saw stop to work.
@em4703
3 жыл бұрын
The chain break on this model is also activated by inertia, not like the older ones that only worked by your hand touching it.
Thanks! Prkongsian yg brmanfaat.Keep it up tompinai👍👍
@edwinladshow5791
4 жыл бұрын
Thank you!!
Keep the chain sharp buddy. Nice video.
@edwardtatham424
2 жыл бұрын
Try a Husky xcut chain, you'll be shocked at the difference.
Did you need to adjust the carb at all?? My older 018 didn’t have L or H jets. Do the 180’s have fully adjustable carbs?? I love my 018. A very underestimated saw. Put a .50 bar and chain and they are awesome, light, nimble, and fast! Use the right saw for what you’re cutting of course, but this is one of my favorites! Thanks for the vid, and nice work cleaning that muffler up. Dremel tools are an awesome invention!!
@edwinladshow5791
2 жыл бұрын
It don't have the L or H screw either,l just left it as it is.Thanks
@markatkinson9963
2 жыл бұрын
I thinks it's a fixed carb. If you do this you need to adjust the idle and rich it up a bit.
@madpogue
2 жыл бұрын
If I recall, if you remove the orange cover, you can see holes for the L and H screws in the carb. I'll have to look at mine again to confirm.
Nice wooden pancakes you made there. Hopefully the wood was maple.
Dull chain
@MrIgottap
2 жыл бұрын
Sure does look like he’s leaning on it pretty hard, especially on the up cut. Maybe he just likes buying bars and chains
с новья отогнул рёбра на глушаке и забыл ,и не нужно изобретать
What size chain you you got
Co to może być że na 1 zbiornik paliwa idzie pół zbiornika oleju? Nice dog
The way you cut scares me
@edwinladshow5791
3 жыл бұрын
I'll be careful next time😁
how do you know how far to open it how much is too much, you cant add it back!!???
@edwinladshow5791
3 жыл бұрын
Idk actuly.I just do it whatever I think It will do and also by feel
@viperstrike3827
3 жыл бұрын
watch ironhorse he explains it well
How to get over 8k views... add puppies!
@Nunya-gk9fr
2 жыл бұрын
It’s a basic formula
all you did by eliminating some back pressure was to make it run leaner
Kalo sepi nya panjang ataw kecil tolong penjelasan nya
Daun
Jakie pompka olejowej?
@edwinladshow5791
Жыл бұрын
I dont understand this language
Terbaik👍
@edwinladshow5791
4 жыл бұрын
Thanks!!
Good idea tompinai
@edwinladshow5791
3 жыл бұрын
Thanks!!
@headhunter4458
3 жыл бұрын
I try to make it..so powerfull bro
How is it now? Alive?
@edwinladshow5791
3 жыл бұрын
Yes
@vovakravchuk1765
3 жыл бұрын
@@edwinladshow5791 shoot some videos with it if possible. Intresting how the dcb noise is now there compared to the stock one. Sorry for my mistakes in english, greetings from Russia👍
👍🇹🇩👍
@edwinladshow5791
4 жыл бұрын
Thanks!
Are you the car warranty bout to expire guy?
@edwinladshow5791
3 жыл бұрын
No..whats that?