I'm giving away a BRAND NEW STIHL MS 261 chainsaw! Enter now through November 23, 2023 (Thanksgiving Day). Details here: kzread.info/dash/bejne/jHaK15mwYqWrnLA.html

This chainsaw worked well to cut up a pile of cedar logs kzread.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and stumps. I used it to cut 12"-16" diameter logs and a handful of odd-shaped stumps that were larger in diameter. There was more than enough power even when using 2x100' extension cords. Be sure to use the right gauge extension cord, since you should be using a slightly higher gauge cord than the standard extension cord most folks have around the house. My 2 favorite features of this saw over previous ones I've used are the built-in sharpener and the quick stop after the the throttle is released compared to a gas-powered chainsaw. As soon as you release the trigger, the chain stops spinning immediately because of the electric motor. Standard feature of most of these electric chainsaws, but worth mentioning here for anyone not familiar with it.Bottom line...I needed a chainsaw to get through some backyard cleanup of logs and tree stumps. For the price of renting a chainsaw for a few days, I got this Oregon chainsaw that got the work done, and now I own it for future use.

I have ran both, and personally I like the 261. The husky is a great saw, but the stihl just felt better to me.

@OldSchoolMillennial

3 жыл бұрын

I hear you man! It really comes down to personal preference. As I mentioned you can't really go wrong.

@Jesusiskingamen7

Жыл бұрын

It feels better to you because your a sthil fanboy. Anyone that cuts for a living or to heat there home wants the fasted saw that’s the cheapest the husky blows the 261 out the water

You're review is pretty much bang on how I feel. I liked Husky and Stihl, pretty much equally. Until the 550 came out.. it blew my friggen mind. It definitely tipped the scales and gave Husky the edge (for me.) I honestly didn't think we would see a better, or even comparable saw. Along came the Mark II. Even more impressive! Besides the MS200, the 880, and the HT131, Husky was always my go to. Then when the 261 came out, I really didn't have high expectations. But I was very impressed. It's pretty comparable to the 550, just lighter. And you it the nail on the head, the 550 has the low end torque. The 261 has a lot of power at high RPMs and in spurts. But I feel like the 550 eats logs faster. Thanks for the review!

@OldSchoolMillennial

3 жыл бұрын

What you said is right. And you really can't appreciate it unless you run both saws. Gotta love that low end torque!

@twobeards6714

Жыл бұрын

I was brand loyal to husky saws but the last two really qualified HONEST repair guys who serviced them have passed away. I got a 261cm and I'm very impressed. I seldom drop trees because there's no shortage of down dead ash herein Michigan. My 288xp and 357 xp are bookends in the shop. Parts and service drove my decision. That husky doesn't sound like my GTO.

I’m a long time stihl guy but I have to appreciate this review ! The side by side was well pieces together and easy to compare !

@OldSchoolMillennial

3 жыл бұрын

Both of these are good saws at the end of the day! You can't really go wrong, it just comes down to personal preference.

@robinverbridge4900

Жыл бұрын

On that 3rd cut his cookie got shaved off, making it NOT fair! He should have cut another one and (for what he is trying to show here) eliminate that third Husky cookie from the video. He wouldn't be hiding anything since it was not Husky's fault!

Great analogy using the two types of cars when comparing these chainsaws. And you were also spot on about dealer support. I have a 395XP and a 592XP and your analogy makes complete sense. However when I ran my saws along side of my friends Stihl Arsenal, I found that the Husky’s excelled at both. Torque and high end. Maybe because I have auto tube saws and I keep my regular carburetor size precision tuned. It helped that I used to run Husqvarna motorcycles and I’m real familiar with two cycle engines. The Stihl was definitely all about high RPM’s. I do prefer the kinesthetics and the performance of the Husqvarna, but the Stihl’s are great saws. When you follow the hot start and cold start MO for the Husky’s they start instantly. I noticed my buddy always struggled with starting his Stihl’s well into the day

Had a play with an MS 261 and a 550 XP today I think the Husqvarna is the better made saw in terms of quality. The 04 light 050 bar in my opinion does not cut quicker than the 058 full chisel chain on the Husqvarna. In the UK 🇬🇧 Stihl and Husqvarna dealers are both prevalent great video.

I really like the Stihl saws because off their power and acceleration. But the saws i use for every day work is Husqvarna. A second plus or minus in the cut does’nt mean that much in real life compared to other things such as vibrations, fuel economy, air filtration etc, etc. The leaking oil and fuel caps on the Stihl is a long story, (yes i’ve owned several thru the years). The huskys are more reliable in the arctic climate up here (northern scandinavia). When bucking firewood or ripping/milling i use the Stihl. For cutting and limbing and every day forest work the husky is my choise. Thank you for sharing your thaughts. Keep up the good work! 👍

I have recently purchased a new husky 550xp mark ll and absolutely love it, its a screamer ive cut a few different types of wood with it so far and with a sharp chain it will eat whatever you throw at it! Ive never ran a saw before that was so smooth, revs high quick and doesn’t bog down at all while in the cut it just wants more lol i cant speak for the stihl but extremely happy with my new husky!

@OldSchoolMillennial

3 жыл бұрын

You're going to love your saw! I've enjoyed having mine for sure! Thanks for watching!

I work with a chainsaw 6-8 hours every weekday, i have both saws, but only really use the Stihl. We have MS500i and 661 for felling and use the MS 261cm for limbing etc. Its pwr/wght ratio and balance is just unmatched, the ms500i is super balanced as well, but too heavy if you have to use it for hours EVERY day. Go for the lightest! Also im just too used to repairing stihl myself, so I dont know much about reliability of the 2 saws in the video, as heavy use will wear any saw. Also remember sharp chain, chain tension and bar-weight means alot:) The Husqvarna is a good saw as well.

@OldSchoolMillennial

2 жыл бұрын

All good points!

@Jesusiskingamen7

Жыл бұрын

Another sthil fanboy lol

Great videos man. Very well put together. Both GREAT saws. Seems like STIHL used to have the torque advantage (older 261s vs. 346XPs). My 346XP, stock, gets plenty of weekly work and it really likes the high end portion on the power band.

@OldSchoolMillennial

2 жыл бұрын

Thanks, man! I have heard great things about the 346XPs. Husky has really had to build a good saws to compare with the last generation of saws.

We have both saws at home. We do use them side by side when cutting the trees to 35cm logs. Both have the lenght of the bar. The Husky eats the wood quicker and perform better in lower RPM. We never had any issues with Stihl. After 3 summers the chain keeps getting lose on Husky. Just ordered new clutch cover and this should sort the issue out. Both great saws but at the end it goes down how well you can sharpen your chain

I love my MS261C I would say it definitely has gained more low end torque since it's actually broke in now and has lots of high rpm power it's an amazing saw!!

I have the 550 zip mark ii, it’s an amazing saw, another great video btw, I’d still like to get the STIHL also, I just love chainsaws

@OldSchoolMillennial

3 жыл бұрын

I understand man. That's why I ended up with both of these saws. I know, right? I love them too. We could start a support group. Thanks for supporting the channel!

You summed it up very well in that no matter which saw you purchase you will be happy with it. However I do have my own 2 cents to toss in regarding the Stihl 261. I have no experience with the Husqvarna saws other than a 136 I bought for camping which is a very nice little saw. As to the 261 I have I let the saw shop old guy talk me into getting the manual carburetor adjust model over the electronic self adjust, not real sure he was correct in steering me that direction or not and most likely will never know. Day one I was disappointed in my 261, performance did not match the hype. I have had it for two years now and I absolutely love my 261 Stihl now. I had the dealer set it up with a 3/8 chain with a 7 tooth sprocket with a 20 inch bar and I thought I just screwed up by going to the larger chain size and longer bar. I did buy a second saw set up the same as a wedding present for some friends so I must have liked something about it. All this came about from reviews just about everywhere I could find them regarding a good home bucking saw for firewood. Subject matter is knarly fir, soft wood but knots abound. Pine and fir is all we have here in Montana so there is that to consider. I buy my logs by the truck load and then buck to size myself because it is cheaper, I get the size I want that fits my stove and I totally enjoy running chainsaws. Now that I have established the parameters let’s get into it. Initially not very impressed and called it the saw that almost was but the more I ran it the better it got, no not kidding. It got stronger as I used it more which I can attribute to breaking in. Looking for more out of this saw I opened up the exhaust port on the side of the muffler and excommunicated the spark arrester screen, don’t need it in my yard, forest yes my yard no. It got even better with this muffler modification. I opened the exit hole about half again the size it was stock and welded a small scoop on it to direct the exhaust gases forward, a tig welder is nice to have. :) Having bought a light weight 25 inch bar for my Stihl 462 I put the old stock 462s 25 inch bar and chain on the 261 just to see what would happen and it works fantastically. The saws oiling system supplies enough oil to the bar and chain which was a relief, just enough not more. I save my 462 for the larger wood but run my 261 most of the time in wood 12 inches and under in diameter. The 261 will take larger wood no problem but I find the 462 does it better of course. Being an older guy weight is a concern and the 261 is a joy to use. Stihl saws are happiest at higher revs so I keep it spinning and have zero regrets with this saw. My faithful Jonsered 625 II is the saw I have used for years prior to purchasing my Stihl saws and is still in primo condition, I take good care of my tools. As I have aged the Jonsered gets heavier it seems but I still take it to the wood pile just for fun and let it know it has not been forgotten. The Jonsered and Husqvarna saws in 1991/2 were for most practical purposes the same saw just different colors, personally I like red. Good video! :)

Good video I have same problem I have both and they are becoming my two favorite saws..Either one and you can't go wrong.

@OldSchoolMillennial

3 жыл бұрын

Thanks man! Amen to that!

Both saws are really impressive. Tons of power for a 50cc. Always preferred the more authentic feel of the Husky

I have had one Stihl MS 260 for over 20, probably 25 years, recently it has started slowly dying out me, I am guessing I just wore it out. So, I am hesitate about getting anything but another Stihl, however you do bring out a valid point as far a parts availability. I can go to any number of Tractor Supply Stores around here and get every day items for a Husky, where as a Stihl is more of a specialized saw. So, now you have me thinking about a Husqvarna.

I started with a Husky 455 Rancher and absolutely love the saw. Built a log cabin with it. But needed to replace the bar and could not find the same replacement anywhere near me or online. Thought it'd be a good time to move to a professional saw, and wanted to stay Husky so the 550 Mark II was perfect. But no dealers within an hour from me, other one shut up shop :( Fortunately the Stihl dealer is 5min away, so made the shift and picked up my MS 261 C today. That Husky looks like she rips, so hoping I don't regret my decision! 😬

I like both of these saws. It was such a tough choice, that I bought a Dolmar 5105. Absolutely no regrets. Love the saw. My biggest complaint with the stihl is the damn plastic handle. Cold and slippery in winter and a little more transfer of vibration because of no rubber foam cushion like dolmar and husqvarna. I have two friends with 261's. They both like them.

@nathanbroomfield4953

2 жыл бұрын

Just wear insulated linesman gloves, the leather keeps it from slipping

Glen, I have a 261 and agree mine was a bit nose heavy with the std 18" bar but I recently fitted it with a 20" 04 light bar and it feels perfectly balanced now!

@OldSchoolMillennial

3 жыл бұрын

I'll bet that helps a lot. I've been looking for those bars but haven't found any yet. I plan on giving them a shot when I can find one.

@jasonmoncrieff7449

3 жыл бұрын

I am also thinking of getting an 18" light bar and chain to see what it is like. I saw one of your other videos about the ideal of having 3 saws, I have an MS211 fitted with a 14" bar and find it to be a great wee piece of kit for what I use it for mainly light stuff upto 8" diameter. I am debating between an MS462/500i or 572XP as a bigger saw, but have to negotiate with herself first 😆

Your analogy is perfect. It's actually what I've thought of comparing Stihl to Husqvarna before. Though I will say I don't think Aston Martins rev super high.

@OldSchoolMillennial

2 жыл бұрын

Thanks, man. Yea, I was just trying to be able to relate it in a way that makes sense.

Great review.. Logging the big stuff and bucking, I'll tale a tuned old school McCulloch for the low end torque and manual/auto pulse oiler. Them old Macs are way underrated and parts are on the cheap!!

@OldSchoolMillennial

3 жыл бұрын

I love the old Macs, too! I like to use a 1010.

Great video! I am loving my Husqvarna 550XP Mark II as well. That baby screams and can’t believe the Stihl revs higher. The build quality is amazing on the Husqvarna and it just looks way cooler. I guess I am one of the few to say I don’t have the urge to try the Stihl.

@OldSchoolMillennial

3 жыл бұрын

Thanks man! The 550 Mark II is definitely a screamer. Hope you enjoy yours as much I am mine!

@Brian-Outdoors

3 жыл бұрын

@@OldSchoolMillennial you’re welcome and I do.

@brettblack7049

3 жыл бұрын

If you like the handling of the husky and the handlebar spacing of huskys, there's no reason to try the stihl. Well, unless you just like saws :).

@cisco5400

Жыл бұрын

It says here where i read 261 has 25.6m/s at 133% and 550 26.1m/s at 133%, it means 550 revs higher right or am i mistaken?

@Brian-Outdoors

Жыл бұрын

@@cisco5400 I believe you. The 550 mark II just screams.

Husky's are my ball of wax, so the choice is obvious! ! Husky all the way for me! Bought 572 a year ago (love it) and wanna add a 550xp mkll to the mix also in the worst way!! And sounds like husky is releasing new 90cc saws too!!!!!! Really exciting stuff!! Have a great day!

@OldSchoolMillennial

3 жыл бұрын

Haha, nice! If you end up getting the Husky Mark II you won't be disappointed. I heard about Husky coming out with a new saw. I haven't heard many details yet but that will sweet!

@Sensei948

3 жыл бұрын

@@OldSchoolMillennial oil mix 1:33 ?

What was said below: Safety chain vs normal chain. Use duplicate style chains and rerun. Weight can also be a cutting factor. By the looks of how you are holding the saws it looks like the Stihl weighs about 12 pounds and the husk wieghs about 15. More weight pushing down equals faster cuts and maybe faster wear on the bar.

@OldSchoolMillennial

3 жыл бұрын

These are both actually anti kickback chains from each respective company. The purpose of the video was to show how these saws run with the chain they come with from the dealer.

@journeyman138

3 жыл бұрын

@@OldSchoolMillennial - I love Stihl, but the first thing I order is the more aggressive chain.

This should be a good comparison. I like my 550 and 545 mkII but the 545 really surprised me. Used my echo 501P the other day cutting a willow tree blown over then used makita ea5000preg w 3/8 and I will say with certainty I know the makita will run with either 261/550 But they are $500+ now too. rated 3.9HP

Not to take anything away from the 550, as it's certainly an outstanding saw but I run RS chain on my 261 and see a much better flow of chips. Those saws should have run between a second of each other in that small log. I do appreciate your demonstration though, thank you.

@Jesusiskingamen7

Жыл бұрын

The both had to same chain bro stop makin exercises for the sthil it gets beat by the husky every time

It's clear that the Husqvarna is a faster cutting saw. That said I have a ms 362 and a ms261. I think the Stihl is built for the long haul. Two ring piston on the Stihl. 1 ring piston on the Husqvarna.

I am shopping both these saws. I have owned both brands and have good support for both in my smallish size town. I am getting older now and that extra pound that you can't feel I think might be important to me as I get longer in the tooth. I would probably put lightest bar I could find on either of them. I am sure the difference in cut speed you showed was chain related. These are both wonderful brands and I will end up with one of these saws. Thanks for sharing.

@brettblack7049

3 жыл бұрын

What did you end up buying. Both are great, I have a ported 261(previous mtronic version) and the earlier mk1 550 that's stock as well as the jonsered 2252 with a muffler mod(it's like the husky 545 mk1). I've had the latest of the 261/550 both stock and modded, still prefer the husky for limbing, and I prefer the mk1 as it's lighter. Look forward to hearing what you got, I like saws lol.

Im gonna wait for the mark18 so I know for sure i got the latest model!

Excellent, and very fair review. Thank you!

@OldSchoolMillennial

2 жыл бұрын

Thanks, Dave!

Both cut the same if they have the same chain.. lol. I do prefer the Husky's though. It just feels better in my hands. Both are good saws though..

I know the videos 10 months old but I’ve run both, the Stihl had the new lightweight narrow kerf bar and 1.3mm square chisel chain and was able to run both saws on the same chain. Makes a massive difference to both saws but the 550 seemed to be quicker. Might be worth a new video for yourself to see….

I personally am a stihl guy and have ran and own several models. I've been considering the MS261 & 550xp to have a smaller saw for smaller wood. I kinda want to try the husky tho. Looks like she rips!

@robinverbridge4900

Жыл бұрын

Crosscuts! Rip is parallel with the grain.

I'm not a professional but I've been cutting my own firewood for about 5 years now. Approximately 5 cords per year. When I was young, I told my father that I would never cut firewood when I get older but here I am cutting firewood. I started on a cheaper Sthil MS171 (1.3Kw) then purchased an MS251 (2.4Kw) because I needed more power. I still own the ms171 and it's a good saw but I can't use it because I find it hard on my back standing up waiting for this thing to cut. There's a huge difference between the two saws. Yes the chain is sharp but you just can't lean on it and cut faster without it stalling. My MS251 is literally my go-to saw but now I'm wondering if it's worth the investment to go to a pro-level saw to get more power in a very similar weight. Now in thinking of going pro grade for better power to weight. The MS261 is 3.0Kw at almost the same weight as my MS251. Am I being foolish!

I'm all for Husqvarna but the tests that i have seen, the stihl 261 cm was faster. I think the husqvarna Xcut chain is just so much better out of the box compared to the particular stihl chain that you used. Non the less both are incredible saws, i would have hard time deciding which one to get, so i understand why you have both :)

@OldSchoolMillennial

3 жыл бұрын

Yes, they are both great saws. As I said you can't really go wrong. The chain could be a factor. Those were the chains that came on each one. I was trying to show people what to expect from a stock saw from the store. Thanks for watching!

@sandymush7163

3 жыл бұрын

@@OldSchoolMillennial run the 261 with 26 RS chain. that would be a fair test.

like the review love both saws 2 things #1 not the same chains used a timid green chain on the 261 # 2 check the second cut review you placed the stihl on the tree when you cut through the saw just sat in your hands the husky was placed with force on the tree and when you finished the cut force was still pushing and the saw had momentum with force

@OldSchoolMillennial

3 жыл бұрын

I'm running these saws against each other again with a different chain on the Stihl on Friday's (4/2/21) video.

excellent and great video. I guess the notorius difference in the cut between both chainsaws is due to the difference in chain width (1.3 Husqvarna VS 1.6 mm Stihl). It would be possible to use the 261's bar and chain in 550xp mk2 or viceversa?? It would be the definitive comparison.

@OldSchoolMillennial

3 жыл бұрын

I actually tried that but I will need to figure how to adapt the bar to fit the 550. It's a good thought for sure. For now I ran them with the chains they came with stock.

@robinverbridge4900

Жыл бұрын

@@OldSchoolMillennial that is how we buy any product... the way it comes from the factory, both manufacturers had a chance to offer their product to be the best. I watch these videos to learn which is the best to buy! Which is the best for cutting wood! I am not trying to get some parts from here and there l just wanna cut wood!

Great video, I just got a 261with an 18 bar....question is where is your bar made? USA or Germany? Thank you.

good video ! thank you so much.

The people have spoken, and I'm running these saws against each other again with a different chain on the Stihl on Friday's (4/2/21) video.

@Sensei948

3 жыл бұрын

Master, is a 1:33 mix okay for the 372 xp 357xp 351 and the 545rx scythe? Will it not make too many deposits? husqvarna LS + oil?

I went in to buy a new 550xp today but they’d just sold the last 2 they had. So I ended up getting a 261cm. Wanted a 16” bar on the 261 but all they had was 18 and 20 so went with the 18”.

I have the MS 261 but if I could choose again I would take the 550 MK 2. I just love Husqvarnas aggressive engines

I have not done the muff mod on echo yet but will. If you watch echos video of that saw you can see they opened up the exaust.I did it on my 490 and noticed it too.%02P is a fantastic light saw but wont cut as fast as the 261/550/5000p so what its almost 2lbs lighter. And Im on first tank.Prrob didnt make over 6 cuts.the makita is a force to be dealt with so all the husq/stihl guys may be surprised.

This would of been a better test if you would of used the same chain, I couldn't tell exactly but on my screen the Stihl chain looked like it was their "green" chain (the little colored box) which is more of a home use or beginner chain with reduced kickback but it also cuts slower, I believe the ms261 comes from factory with a yellow chain on it but I can't remember, but for the most accuracy in this test try using a third party chain like Oregon on both, Oregon is a great brand that a lot of people use

@tracyperry6231

3 жыл бұрын

My 261 C-M came with the green low kickback chain on it (18" bar). Purchased it about 3 weeks ago, so don't know about what shipped before that... but I'm sure this saw had sat on the shelf for at least a few months. Our local dealers were out of it and could not order it and found it at a dealer about 45 miles away. Main reason I got the 261 C-M was I have a 290 that went 17 years only needing the minor parts replaced (couple of sprockets, the bar, the bar stud nuts stripped & were replaced) so I was pleased with the reliability of it. Only big issue I had with the 290 was the ignition coil going bad (weak spark) about 2 weeks ago... and are those things stupid expensive for the OEM ones.

I looked at both and decided on the 550XP MK 2. The Mk2 is actually a pound heavier than the 261 but the Husky felt lighter and better balanced.

@OldSchoolMillennial

3 жыл бұрын

I had the same thoughts when running these saws. Enjoy your 550!

@livewithnick

2 жыл бұрын

Yeah my 550 mk2 definitely feels lighter than my 261c.

In Australia an MS261C is $1499 AUD and a Husky 550XP is $1555 AUD. That is approximately USD $1124 and $1166

Have the stihl years now NEVER missed a beat have cut acres of timber great saw great service

The first thing I noticed was that you had to prime the husky before starting it and the sthil you just had to press the trigger to move the lever to the prime position and then start it and then press the trigger again to get it to the on position so that is a good idea 🥰

I have the Stihl MS 261 C-M, my brother has the Husqy 550XP and we were thinking of getting the Echo CS-501P to compare it with too.

@OldSchoolMillennial

3 жыл бұрын

Awesome! That will be fun comparison. Thanks for watching!

@JosipBosiljevac

3 жыл бұрын

female lumberjack has done it!

Hi i loved he video I zoomed in on the chain boxes and noticed the the 261's chain was a .63 gauge while the 550 had a .50 gauge chain meaning the 261 is cutting a wider kerf and the reason it cut slower and stihl bars are heavier as well those x cutts are light just my 2 cents keep up the good work

@OldSchoolMillennial

2 жыл бұрын

Thanks, man! Yes, you are correct. The 261 comes with a .63 gauge chain from the dealer while the Husqvarna 550 comes with a .50 gauge chain.

@robinverbridge4900

Жыл бұрын

@@OldSchoolMillennial l HOPE you mean .050...on the Husky and .063.... on the Stihl .50 is a half inch l wouldn't be able to pick the saw up off the ground!

Was the mark 1 released before the 261?

great video !! ....just curious as to which one has less vibration...thumbs up

@OldSchoolMillennial

3 жыл бұрын

Thanks, man. The 550 vibrates less. Thanks for watching!

You should mention this is a totally redesigned husky 550xp because the original had so many problems that they had to go back to the drawing board to get a 50cc saw that could keep up with the stihl. No bias here because i have the original 550xp.

@OldSchoolMillennial

3 жыл бұрын

Yes, I know what you're saying. I did a more in depth review on the Mark 2 in another video. This was just more how these to feel when you run them. Thanks for the input.

You need to switch the chains and run them another three cuts to see the real difference

@parkrow777

2 жыл бұрын

And switch logs

@philipknight7180

2 жыл бұрын

i dont think the chains are interchangeable between stihl and husq. i think they have different number of drive links.

@leesmith9942

2 жыл бұрын

@@philipknight7180 kzread.info/dash/bejne/nIuJx9CcgdjMfaw.html

@robinverbridge4900

Жыл бұрын

Well... CORRECT... I am new to cutting though l want to buy a quality saw and cut wood. So each manufacturer has an equal opportunity to set his saw up with whatever his BEST is. If a very high percentage of woodcutters continue to buy Stihl, the others will be out of business! THEN Stihl will charge even more for their saws!

@tedneitzel

Жыл бұрын

My 550mk2 runs circles around my buddies 261.

Which is easier to pull start?... at my age that is a consideration

Glenn you mentioned the 543xp fit a light saw, what do you think of the 545xp? Are there autotune or durability issue's?? Thanks Rob

@OldSchoolMillennial

2 жыл бұрын

I haven't run the 545xp but my 550xp runs like a speed demon. That would honestly be my suggestion if you can swing it.

Had a husky 372 i think older saw now. But was great.

Husqvarna all day every day.i have 5 of them all run great..

Which one is better? That is the question I could not answer hence ended up with 16 chainsaws- Stihl, Husky, Echo, Shindaiwa and 2 Chinese Perla Barbs.

Husqvarna all day for me. I bought mark 2 and am up against a hopped up 261 (ported, dogs, polished) and my stock 550 still surprises a fellow co worker of mine. Imagine if I actually did some mods to the Husq. Not that I will. I only bought it to make my life easier (flat cutting power lines at work). I do also send full trees parallel to power lines with lean and winch.

@thecartatree

2 жыл бұрын

My 2nd saw is a stihl 462 and I cant compare it to anything, Stihl has its place in the bigger saw realm in my opinion. My 46 would spank my dads comparable log cutting husq saw day after day. So i have a lot of love for both. In the 50cc class i have to give it to husq. Not to mention. I never opened the case until months after vigourous use (no exaggeration), and it literally was pointless to open it. No case has ever been cleaner than the husq. You may as well never open to clean the air filter.

Awesome video, thanks

@OldSchoolMillennial

3 жыл бұрын

Thanks man!

Thank you for a good vid! I just bought a Stihl MS250, as it was a nearby dealer - but Husqvarna seems a better choice - for many reasons. I agree: the more torquey Husqvarna engine, would be better. Other videos, also illustrate the same excellent torque curve. I do like my Stihl, but if buying again, I would certainly consider Husqvarna.

@OldSchoolMillennial

3 жыл бұрын

I'm with you man. It's really hard to choose between two great brands. If you follow my philosophy you'll end up buying both! Haha

Crank bearings just went in my second 550 and also my 562 . Mine are non mark 2 550s btw. Are the mark 2s better or do the stihls hold up better ?

@campnoutdoors1621

4 ай бұрын

The stihl lasts 10 times longer than the husky. That's coming from a professional timber faller who has fell timber for over 30 years! The husky has a little more power. IME the lack of dependability of the husky isn't worth it! It amazes me that anyone would make a determination that the husky is more dependable based off of looking at the saw and not actual use

I had one of the old farm boss Husqvarna ones

Which one of the saws have the least vibration in your opinion ? I have found that the vibrations after cutting all day really makes a difference. Thanks for the great videos of these 2 saws !

@OldSchoolMillennial

2 жыл бұрын

Thank you! Honestly for vibration I would have to give it to the 550 for having less. I run this saw all day without any issues. Don't forget to share these videos if you know of someone looking for a chainsaw.

@mouseymcnabb4783

2 жыл бұрын

@@OldSchoolMillennial I'm definitely going with the 550 my local dealer has several ordered but it's been slow getting them, thanks again for the reviews and quick response to my question !

i love my 550 xp man! so mutch power on hand

That green steel chain is semi chisel, was the husky chain semi as well?

@OldSchoolMillennial

2 жыл бұрын

Yes it was. I also ran full chisel on the stihl in the rematch.

can I ask. is the MS261 the same as a Husqvarna 455 Rancher? as the Rancher is a larger HP! I have a 550 xp 24'' for big work, but I want to change my Husqvarna 240 x torq 2011 16" for a 18'' your thoughts. alway had Husqvarna never had a Stihl.

550xp all day! I'm currently porting my dolmar 5105 in an attempt to go head to head with a stock 550xp.

@OldSchoolMillennial

2 жыл бұрын

That should be a good match-up!

love yours video, i have a husqvarna 550xpg love it,thanks for your help :) from norway :)

@OldSchoolMillennial

2 жыл бұрын

Thank you! Glad it could help, that's why I make these videos!

Darn it! You just cost me 600 bucks, i had to get that mark2, I could not be happy with the first version!

Like everyone else is saying the narrower gauge chain on the Husky (1.3mm vs 1.6mm) will for sure cut faster every time, not a very fair comparison. The Stihl equipped with a 1.3mm bar and chain would most likely match the time of the Husky.

@OldSchoolMillennial

3 жыл бұрын

For this test I ran both of these chainsaws with the bars and chains that they came with from the dealers. If I can find a bar and chain that will fit on both I may try that in the future. But it's easier said than done as I have searched at several dealers and now I'm trying to search overseas just to find a bar and chain that is the same. Unfortunately these aren't like the larger stihl and husky saws that you can just swap the bar back and forth.

@brettblack7049

3 жыл бұрын

Have you tested this theory, or is it just a guess. While it would seem to work the way you described, once you get over a certain level of power(right about where these saws are at 3.8-4hp) a standard 3/8 chain will beat even 3/8 picco/low pro, or the 325 in the narrow chains. I'd like to hear you're experience though, always willing to learn.

@robinverbridge4900

Жыл бұрын

You are making a very sensible point! Can someone from the Stihl saw company explain why their ms261 has the wider kerf Chain?

Hi pal, I purchased my self Husqvarna 565 and I would like to see comparison vs 550xp mark 2 If you think that you will have opportunity to put your 550 against 565 please let me know so I will try to stay around:)) For the moment I subscribe at your channel I saw first video with 550 mark 2 Reviews ane second video this. And I want to tell you that, you do very good content (video comparison's) I'm pretty happy. I don't understand 100% English but I understand most of the words I'm happy Thumbs up for bought videos I saw😃

I think a diff chain on 261 would make big diff. IDK

@ChiefManny1

3 жыл бұрын

Bigger profile. Usually 261 comes with .325 profile chain as stock. And the 550 comes with 3/8 or .375 profile chain. So it is an unfair comparison.

@thefordcollection8490

3 жыл бұрын

@@ChiefManny1 550 mark 1 or mark 2 is .325 chain

@ChiefManny1

3 жыл бұрын

@@thefordcollection8490 in my area dealers sell the Husky 550 with .375 profile with an 18" bar. And the Stihl 261 with the .325 profile with 16" bar. I own both and that's what both came with as stock. Jus sayin.

very good video But i think the stihl chain just wasnt cutting it.I dont prefer stihl but its do to prostate exams by stihl in the past.The Makita ea5000preg used to have flooding issues when left in garage or barn fuel up. Im keeping track and if my new one floods then they still havent fixed. But i let it set for 2 mos with small amount fuel VP 50:1 I thought it was flooded it started on on but then died so I put on choke.I checked fuel was almost empty. Filled up all the way and its 80 degrees today. May see today?? Fingers crossed but has lowend power like a diesel. Plus screams 13,800 too if you let it. I add about half teaspoon stihl ultra oil to ea gal of vp.So I do like stihl oil!!!!!

The 261 has a safety chain, so it does not cut as aggressive as the x cut husqvarna

@Southpaw226

3 жыл бұрын

The sp33g is also a green chain

@Dibelchii300

3 жыл бұрын

Don't forget the X-Cut he has there is a pixel bar and chain too. Notice the narrow kerf symbol.

@jasonmoncrieff6065

3 жыл бұрын

Glen, if you had the newer Stihl 04 light bar and chain fitted please do another comparison of these two as the new stihl rs chain is 1.3mm and like the husqvarna has a narrower kerf than the current setup on your 261. Also the stihl will feel better balanced with the light bar

@steppoffaith8426

3 жыл бұрын

Black bla!!!! So you saying the fact that the 550 turning 11k in the wood vs the 261s 9k isnt making the difference!!!!!!!

I know 1 pound of difference in weight doesn’t sound like a lot, but if you pack a saw around for eight hours a day by the end of the day you will appreciate the 261‘s lighter weight.

I'm going with the 550xp.👍

@OldSchoolMillennial

3 жыл бұрын

Enjoy your new saw!

Make please stihl light 04 bar and rm pro chain on 261. This would be the best compare.

@OldSchoolMillennial

3 жыл бұрын

I would love to find a light 04 bar but I have not been able to find one here in the states. Thanks for watching.

Thanks for the video. at any time, any saw from the factory will be significantly faster than another, even within the brand. tool changes in the plant, castings, etc., vary, sometimes radically, and every once in a while, really good, or really bad saws show up (squish, port timing, part quality, etc. causes the difference. In my opinion, Husqvarna machines are fugly, I will stick with Stihl. Also, I have more parts, bars, and experience with Stihl products.

I think the Stihl ms261cm weight is 12 or less pounds which seems pretty light. Anyone know how it compares to the Husqvarna 543 xp ? What's the significant differences. Thanks 💥

@OldSchoolMillennial

3 жыл бұрын

The power head on the 543 is just shy of 10 pounds which would puts it around 11 with a bar. It also has a little less than 3 horsepower. Honestly if you're looking for a better all around saw I would lean towards the 50cc class with 4 horsepower unless you already have a 60/70 cc saw. Just my 2 cents. Good luck!

@robinverbridge4900

Жыл бұрын

For reasons (maybe good) other than a running saw, those weights are low! The power head empty of gas and oil (no bar no chain) is weighed and reported to us saw buyers!

I noticed you put a safety chain on the stihl . They cut slower then the non safety chain on the saw .

@OldSchoolMillennial

3 жыл бұрын

James, both of these chains came on these saws from the dealer this way and both are anti-kickback semi chisel chain. The idea was to show what to expect from dealer when someone purchased it off the shelf.

@green-zone36

3 жыл бұрын

I think stihl chains on both saws would be a more fair comparison.

@jamiecolton2511

3 жыл бұрын

You should of used the same chain. The stats don't lie. The 261 has the best power to weight ratio. I owned a couple huskies..

@eliasnull

3 жыл бұрын

@@OldSchoolMillennial I am a stihl dealer and stihl ships full-chisel chains on the pro saws so this should not have came with the safety chain from new. edit-I am also a Husqvarna dealer and like both saws but for long-term performance the Stihl wins every time.

@MrCtaz1319

3 жыл бұрын

@@eliasnull i have heard this my whole life and alway bought stihl. And literally got so sick of paying for rebuilds decided to by a cheap ass craftsman that literally lasted longer. I own a Husq trimmer I have had for 30 years so I bought a husq saw and there is absolutely no doubt from a non pro that has no stake in this shit that the husq is just way better. Now maybe people that know way more know how to get more out of a stihl than I do. But I look at it like Apple and microsoft. I know nothing about tech. I fooled with windows for years and stayed lost. Mac is sooo much easier for the non professional that there is no comparison. I am glad I finally stopped listening to the pros about stihls. Cause in my hands they have been nothing but money pits

Sorry was 357 husky. Lasted well loved it.

@OldSchoolMillennial

2 жыл бұрын

The 357 was a good saw too!

Used to feel the other way around…the older stihls had more Grunt and low end torque with Husky having a higher chain speed. (Exception of a few husky saws like the 95cc pro saws…they were all about low end torque.) Lately I look at it more like Stihl pushes new innovative technologies the most with a lot of hiccups…Husky stays in a bit more proven technology with less hiccups(they do have some quality control issues it seems but not to the point I don’t trust their quality) while Echo tries to perfect older technology with the least hiccup but also less power per pound performance.

@OldSchoolMillennial

5 ай бұрын

That's an interesting way to look at it. Thanks.

Thank you for your video. I have a first generation 550XP. Just trying to decide if I should get the MarkII!!

@OldSchoolMillennial

3 жыл бұрын

I have a first generation in the red variety. It's a Jonsered. I could definitely feel a difference between the two saws. Good luck with your decision!

@brettblack7049

3 жыл бұрын

@@OldSchoolMillennial So you have a jred 2253, those are nice saws. I have a 2252 with a muffler mod, it's almost new, it's a 2017.

Should run the rs3 chain on the stihl 👌

What is the price of husqvarna 24inches?

someone has most likely stated this, but the Stihl chain is inferior to the Husky chain, makes a big difference, I personally go Husky all day.

Bro use the same style chain = street cred..

I have stihl ms 250 and ms 180.When we first bought ms 250 in 2009 we were litle bit consider shold we bought bigger or small?So for fired we chose ms 250,and ms 180 is another story!I told my dad that i need chainsaw for small branches and three years ago ms 180 came at our home!

@OldSchoolMillennial

3 жыл бұрын

Both the MS250 and MS180 are good saws. It's fun to have one magically appear on your doorstep. If you are going to be cutting bigger wood it might be nice to step up to an MS261 or MS362. Because you have the smaller saw covered. I might look at one of the two I mentioned or you can look at the Farm and Ranch saws MS271 / 291.

What chainsaw will last longer over the years, stihl or husqvarna?

@OldSchoolMillennial

Жыл бұрын

I've had good luck with both saws. If you're split between both saws, you could always go with your closest dealer.

Great video- I bet the heavier husky was able to go quicker because of weight maybe? I like it over stihl but own both

I have the 261 so I do have bias but c’mon dude, put equal chains on them. I switched to a full chisel and it’s night and day different.

@OldSchoolMillennial

3 жыл бұрын

Steve, for this test I ran them both with the chains that they came with from the dealer. Both of these chains are anti-kickback. This is how all dealers initially sell there chainsaws with anti-kickback chains. In this case both of these chains are semi chisel.

It's interesting how they are flipping. In yesteryears stihls was always over engineered tanks. And Husqvarna was the lighter more nimble saw. Now stihl is on average a pound lighter and Husqvarna is making there saws heavier than ever. Old stihls are my go to but the new huskys are coming in strong....

@OldSchoolMillennial

3 жыл бұрын

Interesting observation. I haven't thought of that. Thanks for watching.

The oil and fuel caps on the Stihl is a deal breaker...can't wipe sawdust from them... Iknow a guy that rinses them with premix before removal ,husky caps 100% superior

@markatkinson9963

3 жыл бұрын

I get it, but that is what a fuel filter is for. You are still going to get crap in the tanks no mater what. Those caps are pretty unpopular .

@jamiecolton2511

3 жыл бұрын

The Stihl caps are tool free and you can't over tighten them. Husky, another story.

@brettblack7049

3 жыл бұрын

@@jamiecolton2511 You've never used a saw with the husky flippy caps, they're everything stihl should have made theirs to be. Stihl flippys suck!

@ernielucas6544

2 жыл бұрын

@@markatkinson9963 i carry a old toothbrush in my saw box for the dust around the fuel caps probably doesn't get all of them but most of them lol

You should try it again with a yellow Stihl chain on the 261c

@OldSchoolMillennial

2 жыл бұрын

I did in my Rematch video.

Stihl (green) chain came on my saw. Bought Oregon Advance cut and it was substantially faster. Bought Stihl RS when I finally made it back to the dealer and it was faster still. No comparison. Save the safety chain for when you're letting neighbors borrow it or teaching children how to run it.

@OldSchoolMillennial

3 жыл бұрын

I ran these how they came from the dealer to show people when they purchase them what to expect.

Seems like the Stihl wasn't calibrated. Let it run for just over 30 seconds with selector to the 🔻 position, chain brake on. Then take off the brake and fully depress throttle. Hold it for at least 30 seconds. You will hear the saw calibrating. When the RPM noticeably drop, its complete. Or see page 44 in your manual.