Love that you take a moment to give safety precautions

Just wanted to say thank you for taking the time & effort to do this review and video. We like to make a good choice with these machines, with the hope of a good investment, thanks again in helping us to do that.

@4MRanch

5 жыл бұрын

No problem glad I could help someone.

I would always wear a helmet and attached ear defenders to carryout this kind of work. Lots of the jobs I have carried out in recent years have been in dodgy locations and the pole saw gives an opportunity to run out of the way, bloody fast.

@phillipperkins4366

3 жыл бұрын

You are correct about the headgear. If you've ever been slapped about the head with some falling tree branches then you know.

Love mine have two extension poles carbon fiber with 91r works great and plenty of power. Have about every tool they make.

Love mine, using the 111R head. Just picked up a 16" bar and chain to replace the 12" that came on her. Going to give her a workout tomorrow.

No way my Craftsman could ever have done that. I'm getting the Stihl KM131R next weekend and I'm pretty excited about it. Good demo

@4MRanch

6 жыл бұрын

Thanks, glad you found it useful. If you have any questions let me know.

@michaelmactavish1728

5 жыл бұрын

my 130r had a chain saw attachment wich i had a 12'' and 16'' bars

These combi's are fantastic tools, I use them every day for work. Stihl has the edge with the hedge cutter but I went for the Husqvarna 535LK due to the extra power!! You won't go wrong with either machine, quality is something you have to pay for.

@4MRanch

3 жыл бұрын

Thanks for sharing!

@4MRanch

2 жыл бұрын

@leonardo migot it’s fast forwarded so I cut the audio out in that section

@robertveres6735

Жыл бұрын

im before buying one of these product so your opinion mean a lot for me. did you try both of them ? did you relly feel the power difference? and the husqvarna is 1.7 kg heavier than the stihl. many thanks if you can answer to me

Looking at buying the km 131 R and some attachment thanks so much for the review videos

Nicely done!

Thanks for the best 14-1/2 minute nap.

@4MRanch

4 жыл бұрын

Your welcome

The advertisement that came up when I was watching this video was for some facial creme. I think youtube has their demographics off. Nice video, nice machine, nice dude.

@4MRanch

3 жыл бұрын

Haha you didn’t you you was supposed to put on facial creme before you ran a pole saw? It helps saw dust stick to your face for smoother skin lol. I’d say it’s off for sure, Thanks for watching.

動画アップありがとうございます。 最近コンビシステムを購入しました。 この動画の人はたぶん身体が大きくて 腕の力も相当強いんだと思います。 コンビシステム 私にとってはかなり重いです。 この動画参考にさせて頂きます。 ありがとうございました。

@4MRanch

3 жыл бұрын

私のビデオを見てくれてありがとう！申し込む

nice review I am going to pick one up

@4MRanch

5 жыл бұрын

Thanks. Hope you like it!

@michaelmactavish1728

5 жыл бұрын

yeah the chainsaw attachment is my faviorate plus you can run abar sizes from 10'',12'',14''16'' wich there awsome that can handle 4 sizes plus i blocked up 4 cord of wood with mine wich made it so easy on the back

Fantastic video here. Just purchased the Kombi setup. Fellow KZreadr here brother. Great stiff. STIHL for the win yet again!

@4MRanch

4 жыл бұрын

Hope you like it!

Your video is perfect. Thank you

@4MRanch

4 жыл бұрын

Thanks

You should make an under-cut 1st to prevent the bark from tearing down the trunk.

@jonla3849

3 жыл бұрын

For small limbs make 2 cuts that align. Under-cut 1st. For large limbs use 4 cuts. 1 & 2 a foot or two from the trunk. 3 & 4 close to the trunk but not in to the shoulder ring. This will result in a cut that leaves a very slight "stub", not a flush cut. This type of cut will form callus tissue faster and more completely than a flush cut.

hey everybody love the video

@4MRanch

3 жыл бұрын

thanks

Here's some advice when the limb is down you should use a regular chainsaw

@4MRanch

4 ай бұрын

I do. Just showing the capability of the pole saw for the video

Hi , I want to see if I can change to 14 inch bar on my 2016 km ht pole pruner , I use it with km131 r, is it 14 inch rollamatic 1.1 mm 3/8 , many thanks

You rock bro

@4MRanch

4 жыл бұрын

Thanks!

Nice video. I need it.

@4MRanch

5 жыл бұрын

Thanks it’s really nice to have.

I have the HT-KM and it has a 12" bar and 64 tooth blade. I see Oregon supply sells guide bars and blades for half the cost but I would have to convert to a 44 tooth blade and change my sprocket from a 8 tooth to I think a 6 tooth. Have you tried other guides or chains or just recommend the Stihl brand. I already blew through 2 blades and a guide that's why Im asking

@4MRanch

5 жыл бұрын

I’ve used Oregon bars on my chainsaws before with no problems but For the pole saw I’ve only used the Stihl bar and chains thus far. I’m on my second chain and the bar is still ok. I have no plans on changing the bar to a different brand yet. If you end up and try a Oregon on yours let me know how it works. It is nice to save money

@smartcatcollarproject5699

3 жыл бұрын

Long post, maybe it can help someone else, at least non professionals. As mentioned in the video this pole pruner uses a lot of oil, so you need to check and add oil very often. The noise is slightly different without oil, but even with the new electric motor it's not obvious at all... until the chain jumps ! From the manual : "If the chain runs dry, *the whole cutting attachment will be irretrievably damaged within a very short time*. Always check chain lubrication and the oil level in the tank before starting work." "before starting work" is clearly a very bad advice ! they should add "... and every 5-10 minutes" instead ! Also : "Every new chain has to be broken in for about 2 to 3 minutes. After breaking in the chain, check chain tension and adjust if necessary" And : "Turn the bar over every time you sharpen the chain and every time you replace the chain" I didn't get any explanation nor any manual from my dealer, I had to search online later, couldn't find the manual on Stihl's European website, neither did they reply to my questions, only answer was to contact the dealer... I'm quite happy with this device, but customer care has been deficient. Source : www.stihlusa.com/webcontent/cmsfilelibrary/instructionmanuals/stihl-ht-km-owners-instruction-manual.pdf

Great video thank you. What’s the weight of the combi and is it heavier than you thought it would be. I’m just cracking 60 and like these units but worried weight might be issue fir me in terms of fatigue.

@4MRanch

3 жыл бұрын

Thanks. The 131 power head weighs 9.7lbs the extension is 3.2lbs and the pole saw head is 4.0lbs. So yeah it’s pretty heavy it wears me out after 20 minutes and I’m only 29. I also purchased the strap from STIHL

@jamesjannell8706

3 жыл бұрын

4M Ranch thank you. I really appreciate your review and feedback. Yeah that’s what you m worried about a darn piece of power equipment doing me in after 20 min. Lol.

@4MRanch

3 жыл бұрын

No problem

Nice I'm buying the saw attachment tomorrow what extension do you have I know there's 2 different ones

@4MRanch

4 жыл бұрын

I have The all metal one. It’s cheaper than the carbon fiber.

When you changed over to a 14 inch bar and chain, did you have to change the sprocket? I tried to change mine and the chain doesn't seem to fit properly in the sprocket. Thanks!

@4MRanch

6 жыл бұрын

No I didn’t have to change the sprocket. If you have an older one then you may have to change it. They have 2 different 14in bars. The newer bar is a 72 tooth 1/4 picco. So if you get the correct chain your good to go. Unless yours is the older unit. I’m not sure what the older bar was it may of been called a 14in picco but I’m not a 100% sure The chain I got for the 14 is a picco micro type ,1/4 pitch, an a .043 gauge. 72 tooth

@byronmaxwell2225

6 жыл бұрын

4M Ranch Thank you so much for.the quick reply and the video's. I have the newer attachment. You inspired me to go ahead and get the kombi unit. I just bought it 2 weeks ago. I'll go by dealer today and check. Again thank you!

@4MRanch

6 жыл бұрын

No problem!

@4MRanch

6 жыл бұрын

If you check on the side of your current bar that came with your pole saw it should say the pitch. Yours might be the 3/8 pitch

@byronmaxwell2225

6 жыл бұрын

4M Ranch I'll check it either this evening or Monday. You have been a BIG help. I will report back when I find out.

How is that Pole saw holding up? I am looking to get one and am having a tough choice between the Stihl and the Husqvarna

@4MRanch

5 жыл бұрын

It’s holding up great. It’s been well worth it! I finally wore out the drive sprocket and It’s really easy to service also. Check out the sprocket replacement video if you haven’t already. I really like it and would buy it again for sure!

You can also buy the non safety chain and it will cut even faster

@ifranksultan

3 жыл бұрын

What is a nonsafety chain?

@4MRanch

3 жыл бұрын

Chains the have a yellow dot on the box. The “safer” chains have the green dot.

@4MRanch

3 жыл бұрын

Essentially the green dot chain and green bar are for low kick back.

Thoughts on this vs the 111r? Local dealer only carries 111 as highest =\

@4MRanch

5 жыл бұрын

Sorry Russ, I couldn’t tell you one way or the other. I haven’t had the opportunity to run the 111.

Also where did u get that nice strap. Is that from stile

@4MRanch

3 жыл бұрын

yes

Looking at getting a KM-131R soon, Hows it holdin up?

@4MRanch

4 жыл бұрын

D&S Lawn & Landscaping Services it’s running great still.

Great video and explanation! ⛑ can save your life:-)

@4MRanch

5 жыл бұрын

Thanks! Welcome to the channel. Thanks for watching

I just got that unit my reb limiter is kicking in way to early but it sounds like yours is doing the same , are you holding yours wide open mine starts cutting out right aboue 1/2 way , this just can’t be right !

@4MRanch

2 жыл бұрын

Yeah mine was wide open. You may need your carb adjusted

Safety gear on using a pole saw should be a hardhat!

I just got me one! I love it but the only problem is it does not cut as smooth and quickly as your! Any advice?

@4MRanch

Жыл бұрын

I have a 131 power head and a 14” bar. Do you have that?

how do you keep the bar oil from leaking when not in use?

@4MRanch

4 жыл бұрын

I just store mine empty.

I just bought the 131r and noticed mind is making that ringing sound when u let off throttle and at idle, just as yours is doing. People are saying that’s normal with these thing. Can u shed some lights?

@4MRanch

5 жыл бұрын

I think it’s the clutch bell( not sure the proper name) making the sound. Try idling the motor down just a little with a Phillips screw driver on the back left just below the carburetor adjustment. I lowered the idle of mine this year and it doesn’t do it that I’ve noticed.

@bencebusa1959

5 жыл бұрын

4M Ranch well I took it to the dealer I bought it it from and they said it’s perfectly normal. It’s the clutch engaging/disengaging. It uses metal clutch. This thing is a beast if anyone looking for serious power.

@jasonpeterson1424

4 жыл бұрын

I just purchased a Km 131 R and mine makes the same noise. I was wondering if something was loose. I'm glad to hear it is normal.

@boyse69

4 жыл бұрын

Old KM130r did the same thing it's a metal clutch bell so very Normal when the drive is reduced the parts separate and the gap causes the ringing sound

What is the total length of the whole machine with the attachment powered head and extension.

@4MRanch

8 ай бұрын

Haven’t measured the entire thing but probably around 11-12 foot

I really would want to use an extra pole for longer reach maybe two if needed but you you didn't know why to use extra pole

@4MRanch

4 ай бұрын

It would be so heavy you wouldn’t be able to pick it up. Also your only supposed to use one extender on the kombi system

I just hope you didn't let the pecan wood go to waste.

how do you keep the limbs from pinching on your blade?

@capitals40

Жыл бұрын

I have that same question.

want to buy one but the thing sounds like it's running about half throttle? can you lean the thing out some to get more power?

@4MRanch

6 жыл бұрын

It was running full throttle. I think it sounds like that because it’s a 4 mix an from what I’ve read about them they have a rev limiter on them some how. I’ve tried to adjust it a little with no luck in a power increase. It really has a lot of power how it is. I don’t think you would be disappointed.

@darrengarlough5121

6 жыл бұрын

4M Ranch OK thanks for the reply

@4MRanch

6 жыл бұрын

No problem. I hope you find one that will work for you

@hjonedmonds

5 жыл бұрын

That's what I was thinking, I have a 101 and I believe it would cut circles around the 131, I would like to see a comparison of the two.

@boyse69

4 жыл бұрын

4 mix engine has a limiter on rev's to give extended life of engine it will do everything you need Best Money I've ever spent on anything Did you not see the Limb he cut in the video after all its a pruner Not a chainsaw !

Dear brother i need to see a new chainsaw of a brush cutter how fitting its all the parts and then you fit with a brush cutter machine..Thank you so much (so i don't know English very well but i think you will know what is my problem)

@4MRanch

Жыл бұрын

Are you wanting like a brush blade on a weed eater?

next time cut the branch off then junk it up why?

I just got one and it sucks compared to the ms131 pole saw I wouldn't recommend it unless ur use to taking forever

11.37

I would have just took the whole tree down

@4MRanch

Жыл бұрын

It still produces pecans sometimes so it doesn’t need to be cut down yet. We had a few that had to be cut down because of storm damage.