Пікірлер

• 
  @Jacksonsfarmvideos235021 сағат бұрын

  Looks good

• 
  @4MRanch18 сағат бұрын

  Thanks for watching the channel

• 
  @mtower23521 сағат бұрын

  Tight and round just like I like them. I like round bales like that too 😅

• 
  @4MRanch18 сағат бұрын

  Those are the best ones

• 
  @josenavas-q3k2 күн бұрын

  Cómo va la cabuya para q agarre al roolo

• 
  @nathanurick83202 күн бұрын

  Sir you make this look simple but I’m assuming you are very mechanically inclined. I’m being told mine is bad on my 6.7 and last week I had to have my 68rfe rebuilt for $6000 so this hurts me today and I want to do the job myself. Wish me luck

• 
  @4MRanch2 күн бұрын

  I’m sure you can do it. If you have any questions let me know

• 
  @justinw1235 күн бұрын

  Wish mine had a hole in the case like yours for the wood chips. Mine gets clogged up after 1 branch so annoying

• 
  @4MRanch5 күн бұрын

  Yeah that was what I liked about the older style. I’m glad they brought it back.

• 
  @charlesthorpe31795 күн бұрын

  Did it ever trip a fuel pressure code by chance?

• 
  @4MRanch5 күн бұрын

  No never did

• 
  @hatchett999ify5 күн бұрын

  I swear after a few adjustments under the hood my truck is a whole new beast!! What kinda mileage you guys getting out of yours? 600k plus?? Possible??

• 
  @4MRanch5 күн бұрын

  I’m at 260k now

• 
  @hatchett999ify5 күн бұрын

  @@4MRanch I’m at 243k. Truck is running just as good as when I bought her at 40k miles.

• 
  @JC-ys5wm5 күн бұрын

  Thank you for doing this video!

• 
  @4MRanch5 күн бұрын

  No problem

• 
  @stevecarr73387 күн бұрын

  My neighbor had this happen to his truck, the Dodge dealer in North Bay Ontario Canada is charging over $6000 for this. Just be cautious going there. And they really screwed around aswell, he lives 1 hr drive from the dealership so they drove him back half the distance. Didn't offer a replacement vehicle and didn't call back with updates.

• 
  @chargermopar8 күн бұрын

  Around here it is mostly rock,!

• 
  @4MRanch8 күн бұрын

  Sucks when you go to do fence. Luckily this was sandstone I can drill it but takes a little while depending on how hard of sandstone it is. We have limestone but I can’t really drill through it at all.

• 
  @GaneshJU9 күн бұрын

  Thanks. Very helpful

• 
  @4MRanch8 күн бұрын

  Thanks for watching

• 
  @warrior4-u10 күн бұрын

  That is NOT the stock exhaust system on that truck. Stock sounds nothing like that.

• 
  @danieltonnessen65611 күн бұрын

  You can delete it for about 2000

• 
  @chargermopar12 күн бұрын

  Hay today, steaks in the future!

• 
  @4MRanch8 күн бұрын

  Absolutely. Nothing better than your own raised beef

• 
  @rockinghorselivestock249113 күн бұрын

  Thanks for the video. I have periodically had to change my def fluid because i figured it has gotten too old and been in very hot air temperatures that makes it deteriorate more quickly. Its pretty easy to do and I'm old. 😊 The intake line on the def tank has a fitting that disconnects. Then i just pump it out with a hand siphon that has a hand squeeze bulb on it. Takes a couple of minutes to pump the def out and reconnect the line. Now i only fill the def tank 1/2 way so it gets turned over before it gets old. The hotter the climate the more important this is.

• 
  @chargermopar13 күн бұрын

  A cool cat.

• 
  @4MRanch13 күн бұрын

  Thanks

• 
  @MagdalenoLuevanos9 күн бұрын

  How much did you pay for that

• 
  @4MRanch9 күн бұрын

  @@MagdalenoLuevanos $500

• 
  @haidaiphan255714 күн бұрын

  Can you make video how to remove the seat

• 
  @user-im2tc6pl9i15 күн бұрын

  And being trapped inside, nf WAY!

• 
  @4MRanch14 күн бұрын

  @@user-im2tc6pl9i the back window is removable and the frond door is removable from inside the cab

• 
  @mtower23515 күн бұрын

  Most I know don’t do it cause they bail at night too

• 
  @chargermopar15 күн бұрын

  Hopefully keeps some of that solar energy out.

• 
  @4MRanch15 күн бұрын

  Yeah, it makes a big difference in tractors. There’s so much glass. It gets hot in the cab. It’s like a greenhouse.

• 
  @roadrescue884316 күн бұрын

  Yeh it will be a dirty mf model now

• 
  @4MRanch15 күн бұрын

  Hopefully the windows are back from the tint shop in a few days.

• 
  @chargermopar16 күн бұрын

  I have done this before for someone getting electolyzed laminations.

• 
  @4MRanch16 күн бұрын

  What is that like the lazer etching ?

• 
  @chargermopar16 күн бұрын

  @@4MRanch It's like a large LCD display, you can control the tint with voltage.

• 
  @4MRanch15 күн бұрын

  @chargermopar I see, that would be pretty cool.

• 
  @evilkidd187617 күн бұрын

  Great review. Hey bro thanks for the review. I'm bidding for one right now in New Zealand.

• 
  @evilkidd187617 күн бұрын

  After 3 years of usage.. is your original gun still working fine?

• 
  @4MRanch17 күн бұрын

  Yeah, I’ve had to change the O-rings out, but that’s the only thing

• 
  @user-fy5zx4ug8e18 күн бұрын

  You could get in contact with your New Holland Deler. They would have informed on all New Holland farm equipment.

• 
  @4MRanch18 күн бұрын

  I finally found a service manual online for it. It was easy to do. Loosen the belt, remove a bolt and the pulley threads inward to speed up, then reinstall.

• 
  @johnsymmonds690918 күн бұрын

  Did you get the 150 miles to limp mode message with these codes?

• 
  @4MRanch18 күн бұрын

  No it didn’t but probably because once they came on I didn’t drive it. It stayed parked. I preformed all the test it said to do in the service manual so I knew it was bad at that point.

• 
  @mtower23519 күн бұрын

  Sure hate them setbacks

• 
  @4MRanch18 күн бұрын

  Last week it was a/c compressor on tractor. Broken spring and drive shaft on mower conditioner. This week, brakes and pick up chain.

• 
  @chargermopar19 күн бұрын

  If nothing breaks down it isn't a farm.

• 
  @4MRanch18 күн бұрын

  For sure

• 
  @DavidGill-ro6mh20 күн бұрын

  Thanks for making this video! For the 14” chain what model chain did you buy? I have new model pole saw and tried to upgrade with a 16” bar and chain but the 3/8 chain did not work.

• 
  @4MRanch20 күн бұрын

  14” picco micro chain is the biggest you can use

• 
  @robertwynne786120 күн бұрын

  I use a hay trailer the ag multi trailer flat bed or hay trailer all in one

• 
  @4MRanch20 күн бұрын

  I seen that at the farm show looked pretty sweet. Does it work good?

• 
  @robertwynne786120 күн бұрын

  @@4MRanch yes but I was t a fan till they came out with hyd dove tail that was a game changer it takes alittle getting use to not having a wood deck to walk on but besides that I can hook chains anywhere on the trailer with 12k axles 18 ply tires it’s a beast

• 
  @4MRanch20 күн бұрын

  @robertwynne7861 that’s the one I seen with the hydraulic dove. How many bales can it haul?

• 
  @robertwynne786120 күн бұрын

  @@4MRanch mine is 32 foot long so 16 4x5 plus more on top so 20 easily.i wanted 32 foot cause i deliver my hay to my customers so easier to get in smaller gates mine was 33,500 but if you add hay trailer then flat bed you can buy this which is what i did sold my big hay trailer and my flat bed so now one trailer instead of two plus my fields are scattered so drop tractor off load hay then move tractor again saves trips so it’s worth the money and John Magness is a good guy who builds the trailer

• 
  @mtower23521 күн бұрын

  BTW don’t be surprised if YT deletes my comments. I made some little fruit loop up there mad so they are trying to make me disappear without justification.

• 
  @4MRanch20 күн бұрын

  I’ve had a few comments on some past videos but when I go look at them they are gone. May have been you.

• 
  @mtower23521 күн бұрын

  I’m unfamiliar with that grass. If it’s like that then why not use more of this than Bermuda? I’d do this all day long for that kind of production. That’s nuts

• 
  @4MRanch21 күн бұрын

  We do it mostly so we can use less land for hay and more for cows. Bermuda is nice but we just can’t get the production out of it. This Sudan is also high in protein. I’m going to get some tested to see what the actual protein value is.

• 
  @mtower23520 күн бұрын

  @@4MRanchhope ya post that

• 
  @4MRanch20 күн бұрын

  I will

• 
  @mtower23521 күн бұрын

  Flatbeds I’m a small operation so specialized equipment just ain’t a thing

• 
  @4MRanch21 күн бұрын

  It’s hard to justify a hay trailer since it can only be used for 1 thing only.

• 
  @mtower23521 күн бұрын

  @@4MRanchI also buy small squares and use them for the goats/donkey and other “pets” and back during the drought I bought large squares cause that’s what could be had. That “hay” trailer ain’t no good for this.

• 
  @4MRanch21 күн бұрын

  @mtower235 we used to custom bale big squares back in the early 2000s but no one really wanted them. They were not easy to sale. Flat beds can haul pretty much every thing

• 
  @chrispowell562221 күн бұрын

  Flatbed. Can haul more hay.

• 
  @4MRanch21 күн бұрын

  Yeah, I like the flatbed too. A hay trailer is Nice when you don’t have another tractor to unload.

• 
  @Brad-tq2pi22 күн бұрын

  Yup! That’s why it’s called the Stealership… goto a good aftermarket shop that works on hourly pay. Not flat rate. So they will fix the problem and not bring out the parts cannon and hope for the best… I would never work for a dealership again!! Rip everyone off!

• 
  @smallfarmsurvival402623 күн бұрын

  What is that you are cutting?

• 
  @4MRanch23 күн бұрын

  Sorghum Sudan grass we drilled back in May

• 
  @GreenPaint-sn5jg24 күн бұрын

  Your baler will now head south to Mexico just like Johnathon Deere.

• 
  @chargermopar25 күн бұрын

  Handy to add to any skid steer!

• 
  @4MRanch20 күн бұрын

  For sure!

• 
  @tacticaldad745029 күн бұрын

  Does this run ok with just standard well water? Ever have problems with not enough water pressure?

• 
  @4MRanch29 күн бұрын

  I dont know. I have rural water

• 
  @xXFraudXx29 күн бұрын

  Saturday to Wednesday is 4 days.

• 
  @4MRanch29 күн бұрын

  I was just counting 3 full days since I finished baling Saturday evening. but yeah technically 4

• 
  @chargermopar29 күн бұрын

  Very nice

• 
  @chargermoparАй бұрын

  The best way to do it. Will it also go in the field?

• 
  @pigslayer106Ай бұрын

  how much does bobcat want for a new machine like that? looks great

• 
  @4MRanchАй бұрын

  Thanks it’s About 85k

• 
  @pigslayer106Ай бұрын

  @@4MRanch how come you didnt choose a T76?

• 
  @4MRanchАй бұрын

  Man, I’ve just heard too many bad things about the electrical issues on the new R series for one and I really wanted the 92 hp over the 75. I think once they’ve been out a little bit longer, I may look at getting one when I trade this one in, but maybe get the T86. I’m gonna try and get a T 76 for a demo and kind of do a comparison video between the 76 and the 770.

• 
  @pigslayer10629 күн бұрын

  @@4MRanch I forgot the t770 was 92HP. I got a T76 and love it so far. put 700 hours on it with only one issue. fuel filter before the main filter went bad and my local bobcat dealer said it needed a whole new fuel system. they literally wanted 6500$ right then and there. I told them no and i took it to my truck mechanic who simply replaced the small first filter and havnt had a problem since. It is a beast of a machine.

• 
  @4MRanch29 күн бұрын

  @pigslayer106 what a joke! yeah it pays to get a second opinion on stuff nowadays maybe even a third or fourth before you spend a lot of money Least you got it fixed though

• 
  @ManuelReaderАй бұрын

  What is the best? What do you use?

• 
  @4MRanchАй бұрын

  I haven’t bought one yet. I just got a new machine last week that can run one. Hopefully I can get a few demos now to try out from different companies. This particular one from vail seemed like it looked pretty well built.

• 
  @peggyanker1978Ай бұрын

  What year is your ram?

• 
  @4MRanchАй бұрын

  2014

• 
  @chargermoparАй бұрын

  The skid steer is the handiest machine on any farm. I enjoy them so much I would always look forward to being the helper on a friend's farm when they were moving hay, never got bored moving bales with the skid steer.

• 
  @4MRanchАй бұрын

  Yeah it is. That was the first job I used it on yesterday, stacking bales in the barn.

• 
  @chargermoparАй бұрын

  @@4MRanch That's great! I hope you found it more efficient that with a tractor. Also works well in the field.

• 
  @4MRanchАй бұрын

  @chargermopar oh yeah I prefer a skid for unloading and stacking. Way faster and more maneuverable.

• 
  @Franklinveterinarycenter1of4Ай бұрын

  Good information here: watch expiration date on DEF and never purchase from pump def station (gets hot and this shortens life of Def). Never allow to get below 30% during winter months.

• 
  @williamprice3700Ай бұрын

  Awesome machine!😀

• 
  @4MRanchАй бұрын

  Thanks

• 
  @CP-ok1gvАй бұрын

  Very nice I got a used 2019 t650 still trying to put it to work just need jobs now

• 
  @4MRanchАй бұрын

  Thanks, what all attachments do you have?

• 
  @CP-ok1gvАй бұрын

  @@4MRanchjust a beat up cat bucket that was included, I think I’d like forks next for sure

• 
  @4MRanchАй бұрын

  @@CP-ok1gv I see, pallet forks are very handy.

• 
  @iiiii4560Ай бұрын

  Is the stihl pressure washer still running good?

• 
  @4MRanchАй бұрын

  Yeah it is. No issues