Sticky shutter in Rolleiflex 75mm 1:3.5
Ғылым және технология
The slow gear was very sticky in this old Rolleiflex 75mm 1:3.5.
I drop the very little screw that lock the retaining ring on the floor, I simply could'nt find that small screw again :-(.
After I made the film I simply put a small drop of nail polish to lock the retaining ring, it work's perfect :-)
In this film I use Isopropylalcohol to cleaning the slow gear, but I could also use Lighter Fluid, and to lubricate the slow gear I use sewing machine oil but ONLY on the axle end.
Пікірлер: 88
Thanks to you, this was my first successful camera repair - although not as simple as it looks here. Advice: Take a break and try again. It now works like a charm. Thank you so much!
After 4 years of this video, it benefit to me just this week. Following the guide I have successfully rescued my rolleiflex 3.5c. The shutter speed is now identical with my Nikon D610. I think the main challenge of the work is 1) rusty screw that take effort to remove. 2) when you clean the shutter with oil, and try to flex the gear by hand, you will easily displace the pins pressing those gear, if the pins are not in the original places, it will not press the gear and the mechanic will not work. 3) when you reinstall the shutter gear mechanic, make sure the tip at the right side is not blocking the rotation of the gear beside. Suggest to take a video of how the mechanic work before dismantling the shutter gear component . I think the job is easier than I think, after fixing it I am very comfortable as I can live with the camera and maintain it myself in the rest of my life. Please let me know if there is any difficulties on following the video
Hi, I have just discovered your channel and appreciate it very much. It is really invaluable for those interested in vintage cameras. Thank You!
@mikeno62
Жыл бұрын
Thanks Jan :-)
For those of you looking to get those dental instruments, the first one shown (with the orange band) is known as a "flat plastic" & I think the second one shown (with the blue band) was the "Hollenback carver" :)
Excellent. One of the best video about Rolleiflex slow shutter.
"Falls on the floor .. NOT good. Ya ... I have another one" - I know this feeling all to well.
Thanks a lot for this clip ! I just finished doing the same service to my Rolleiflex. Now I can't stop clicking the shutter as the sound is just so nice... Good job, thanks for showing all the little mistakes along the way, I encountered them all :).
@mikeno62
3 жыл бұрын
Yeeeaaah Stefan :-), it's really great when a repair is done with BIG success, so I know the feeling a lot :-)
Another fantastic job, Kenneth!
Somehow the camera survived this torture
This is some high quality content sir! I am gracious to you for taking the time to make these extremely helpful tutorials. -Jensen
Hi Kenneth! Thank you very much to share this fantastic video with us. Appreciate. This video helped me to solve the same issue in my Rolleiflex E model. Soon I will make the same in my other Rolleiflex (F model). Thank you again. (Mario)
Thank you so much for making this video - it is really been helpful several times.
wow, so many parts! I have one too, works fine so far. Will never try to repair it myself.
Great instructions, thanks for this superb video !!!
Nice to see one at normal speed instead of 32X Excellent thank you!
@mikeno62
7 жыл бұрын
Well Harry, you are right some of my early'er film's was way tooooo fast...., but, depending on the task, I will now and then make the motion-lapse film.
Good work! Good man! Cheers!
Great job ! Thank you in detail showing!
Awesome! Perfect timing just bought one of these, thanks for filming your work. Cheers!
@jkoepis
7 жыл бұрын
Me too! Received it the same day this video was uploaded!:D
I agree with everyone else. Fine job! However, this was one of the reasons I changed to the Mamiya TLR. Seiko shutters seem much more reliable. But I can't argue with the cachet of the Rollei and its optics. Damn fine cameras.
Great video! thank you!!
My older Rollei automat seems to need the film wind crank returned to the recessed position before the shutter will trip; that might have helped with your testing at the middle mark. Or yours might be different..nicely made video. It gives me the wisdom to not try this myself on my cameras!
Very Good!
Great seeing people still doing quality work on this! Do you fix other Rolleiflex's? I've had one for years, but suddenly it's not working.. Would you be interested in possibly giving me a hand?
Thanks for the tutorial, I shall not fix my Ikoflex 1C shutter without fear, these shutters seem to have the same mechanism..
Bonjour Monsieur j’ai tenté de réparé comme vous avez fait sur la vidéo car les vitesses lentes bloquaient mais au remontage le déclenchement de l’obturateur ne ce fait plus je suis perdu help😢
I put a strong magnet in a cloth and slide it around the floor to find all the small screws I drop :)
@mikeno62
7 жыл бұрын
I actually in my workshop found one of those very strong magnet, from a big old speaker... Now it's time to hunting small screws ;-)
Met plezier de reparatie kunnen volgen.
Thanks for this. Maybe i'll work up the courage to tackle my Rolleicord shutter.
Hey Mike. On the slow gear mechanism, by the adjust screw is a small spring. Mine currently sticks out and can puncture my finger. What is the proper position for this spring?
I have ‘broken’ I say broke top door that came out of the body I don’t know how to attach it?help I would really appreciate!
I have the same one as this!
I have some questions, my rolleiflex 2.8f infinity focus the shutter can’t work when turn to closer focus the shutter work. What is the happen? Thanks
Can you do another shutter cleaning with voice over on rollie T 3.5 PLZZZZZZZZ....
Wow. You need to be a micro surgeon to work on these!
Hi Kenneth, Good Video, I managed to clean the slow times and they run again. Though something is strange: one second and half second work perfectly, the sirring noise is like it should. the 1/4, 1/8, 1/15 run without the sirring noise and are quite fast about like the1/125. The 1/30 and shorter then are ok again. Any Idea what could cause that?
So my grandfather's camera came to me and the slow shutter speeds were slow...l So I opened it up as per these instructions and it was an adventure. I thought of course it would be easy peasy but I had a struggle to get the slow gear mechanism back in place. There are 2 tiny springs which want to slip out of position and once I got those back in position the 1 second time was working fine. Now I've put it back together and have a new problem... the winding handle is really stiff. this became progressively worse as I was winding the shutter during the repair. Any thoughts on the why of that?
Bonjour c’est un dégommage que vous avez réalisé comment s’appelle la pièce que vous avez trempé dans l’alcool? Cordialement Monsieur.
Hello, thanks for the great video. I could repair my camera with it. One quastion about an other part. I lost the rivet in the waist level finder folding mechanism. Du you have an idea to fix it?
@mikeno62
6 жыл бұрын
Thank's Farblos, you could replace the lost rivet with some 1.5mm copper wire.
Hi Kenneth, thanks for the video! I just got a Rolleiflex 3.5B with the same issue so i will try to follow your steps. Where in DK are you located? Do you have a shop? Where did you find the rubber stopper?
hello master ! i have a 3.5f ...it shut one time and one time no ! regulary ... one by one what i have to do please ? notice i am a clock repairman ...i am not far of this mechanical work thank u so much for this nice videos 🤗🤗
Mike , what do you charge for clean lube adjust for one rolleiflex and 2 rolleicords, I love my old cameras. Thanks Don
Hi Mr Mike. Is it possible to approach the Aperture mechanism without completely dismantling the shutter mechanism? I am trying to correct misaligned aperture blades but the camera is working perfectly otherwise. I wouldn't want to break anything else while I do this
@mikeno62
4 жыл бұрын
If the aperture blades is out of alignment, the best way is still to disassemble the shutter and correct the aperture blades, and at the same time clean the shutter blades and the aperture blades with Isopropylalcohol 70-99 % so they are completely free from oil and old grease, they have to run completely dry, then clean the self timer an the slow gear and other important parts.
@abhishekvsmalyala
4 жыл бұрын
@@mikeno62 I'll probably hold off on it. In my current expertise level I wouldn't be comfortable doing that without the risk of messing something else up. I did easily tackle a Nikon series E 100mm 2.8 aperture and focus ring relubrication very easily from your recent video though. Thanks for your reply.
很棒
Is there anyway to lubricate the slow speeds without strip down ? Could you remove the lens, and remove the inner ring without removing the entire front plate ? You could drop a little naptha or watch makers oil in through here ? Is this possible
@mikeno62
3 жыл бұрын
Sorry Ben, there is only the "hard way", it will say that you will need to open the camera and take out the slow speed, then give it a good bath in Isopropylalcohol 10min or so, then use compress air and GENTLY blow out the rest of Isopropylalcohol. Use a very thin oil, and ONLY!!! on the axle ends, then give it some good movement and wipe away the rest of oil and re-install it again and adjust to correct exposure.
A common complaint on the old Synchro Compurs
Hi! Whats the name of this Rolleiflex model? I just found one like this and need to do some research and its incredibly confusing. Thanks!
thank you for confirming that I will not attempt this
Why dont you check other speeds? Sometimes when you put shutter back 1/15 and 1/30 are too fast and need adjustment, but not sure how to adjust them. Can you tell?
@TimGeersProductions
3 жыл бұрын
I have that exact problem, 1/15 and 1/8 are very fast
very nice, i have a Rolleiflex 4x4 Baby grey with the same Problem shutter doesn`t open sometimes needs a clean ..... what is the cost for something to do that ? KR from Jochen Stuttgart
@mikeno62
5 жыл бұрын
I have no idea what the cost would be, I do not have repair service. Maybe there are some repair person in Germany.
Great tutorial Sir, is it the same mechanic on 3.5F? Can I follow this video to fix my 3.5F and 2.8D? Thank you very much!
@mikeno62
5 жыл бұрын
Thank's, well there are some differences in the different type of the Rolleiflex's and of course there are also different shutter's, and I think there are a different shutter in the 3.5F than the 2.8D. I have one Rolleiflex 2.8D that I would like to try to repair, so there will be another video about, how to repair the shutter in my camera sooner.
@shuizhui
5 жыл бұрын
@@mikeno62 Thank you so much! I'll keep following up with your videos. I truly respect for what your do.
How do you get information about the cameras that will fix like, how to know the position of the screw under the leather cover? (it looks like leather!)
@mikeno62
7 жыл бұрын
The best way to know how thing's work is to disassemble it, and the best is when a thing is not working, or somebody say it can not be repaired. Then there is a possibility to open it, without a risk that you have to deliver the thing back to a person, and on the other hand learn how you maybe could repair the thing. So I have spend A LOT's time disassemble cameras, lenses, tape recorders, turntables, and other electronic and mechanical stuff during the most of my life, just to see what's inside..., without a service / repair manual, JUST many many try and error's.... Of course today it's more easy to find some repair manual's, but for many brand's, there are NO service / repair manual at all... It had give me a lot's of knowledge in, how thing's is assemble. In the case of repair old cameras just like The Rolleiflex I simply began with some NOT working cameras found very cheap on Fleemarket's. Hope it makes sense.. Cheers Kenneth
@loricastro3772
7 жыл бұрын
Thanks a lot for your answer! Regards from Brazil, Lourival
Hi Mikeno62. I have started to resemble my breakdown. The shutter is working nicely now. I have a situation where I am trying to reinstall the part that you didn’t know the name of. The first part that goes back on the has the little spring, that has the little teeth that has to align with the small wheel with the teeth. When i remove the small wheel, i can advance the camera, when I reinstall the small wheel, I cant not advance the camera. Feels like it stuck. There is something with the realignment of the part with the wheel that i am missing.. any advice from yourself, or anyone else out there, will be much appreciated! Thank you for the demos! They have been much help! -James
@derickruchti5921
Жыл бұрын
Hey was wondering if you ever found the solution to this problem ..mine is doing the same thing . Thanks
I have a Rollei 3.5F. It is not as good a picture taker as the wonderful Zeiss Super Ikonta B. It had one of the sharpest lenses ever manufactured!
where can I buy 31mm rubber stopper ? thanks
@mikeno62
4 жыл бұрын
Right here: www.hopt.se/dames-jeannes/28166-no-6-26-31mm-stopper-drilled.html
what kind of glue is it? thanks.
@mikeno62
6 жыл бұрын
It's contact glue, or you can use hobby universal glue.
“Falls on the floor..not good…”
Can't you show how to check and adjust focus on a Rolleiflex?
@mikeno62
4 жыл бұрын
I will add it to my ToDo list.
@W0mpa
4 жыл бұрын
@@mikeno62 Tak!
Great video. Can I send camera to you to repair? Just asking.
@mikeno62
7 жыл бұрын
No.
Wow, you're a butcher ;) How can you not cover both the viewing and unscrewed taking lens during the repair? Also, do you really consider this amount of oil a "small drop" ?
cab u send you mine to fix!!!
@mikeno62
4 жыл бұрын
Sorry, I don't have repair service
Thank you for putting out this video. My 3.5 has the same problem. The entire cranking maneuver feels stiffer than my 2.8. It would be another great video if you could show how to clean and lube that.
I have this very little screw for sale , if some body loosed
@mikeno62
6 жыл бұрын
Well, I later found the one that was in camera, so I don't need to buy another one :-)
Those shutter blades get stuck once every two years from lack of oil.
@deepseadiver8191
4 жыл бұрын
Exactly opposite - they get stuck from using oil. Shutter blades are not supposed to use any oil.