No video

Sticking Brake Caliper on a HONDA CB 500 PC 32

My front brake caliper is getting stuck, i will investigate and show what happend there. I almost crashed from this problem and i would recomand to check the wheels from time to time to see if the spin without resistance.

Пікірлер: 4

  • @dandyche
    @dandyche6 жыл бұрын

    What was the problem and how did you solve it?

  • @KleineFamilie1920

    @KleineFamilie1920

    6 жыл бұрын

    Hello, the Piston was full of dirt, i removed the pads and pressed the break until the piston was out until you could see the clean side then i cleaned it very well with a toothbrush and warm water with soap until it was all clean. Problem solved. Sorry for my bad english. After you are done clean everthing with a Break cleaner.

  • @dandyche

    @dandyche

    6 жыл бұрын

    Nita Alexandru I’m having a similar problem. I’ve cleaned and rebuilt the caliper and put new fluid in. The pistons are releasing but the pad on the other side is still running on the disc. Unsure what it’s not letting the wheel spin freely...

  • @KleineFamilie1920

    @KleineFamilie1920

    6 жыл бұрын

    www.motociclism.ro/forum/index.php?/topic/30820-honda-cb500-home/page-245 That is what i did, the caliper is sliding, you must put some copper grease on that pins and move it by hand until it slides with ease.

Келесі