Good job tuning. That Valve Pass Side Rocker Cover has a notch for a side mount F2 ProCharger originally. Send that cover back to me and i will give you one without a notch.

The ugly Christmas sweater is on point!

New too the channel, very cool! Been a fan of Steve and his work for a while and always like getting "outside" opinions of he and his crews work. The reaction after the final pull says it all! Good stuff boy's!!

It's always something.

That's a really nice curve as well 👍 Awesome job !

Wow, what a difference you guys made. This is now a killer stove. Congrats Ron, hold on and enjoy your first run.

That Ron’s system is the same system I out on my 415 SBC 32 Bantam Altered.

@internationaldynoauthority693

5 ай бұрын

Once you understand how to do a leak down. And the difference between a naturally aspirated setup. And a boosted setup. These work pretty well. You lack the tunability that you do on electronic fuel injection and you lack the tunability that you have on a carburetor. But methanol is much less fussy. So you end up with some rich spots and lean spots that work pretty good

I run a dual terminator on my stuff....those systems are super easy to tune and perform very well once dialed in!

Great video guys and like how you are explaining things like they don’t know much at all which more will understand that are really new in this area of engines and tuning up? Like u did on the valve adjustment.

New sub here this me 1st vid absolutly am a Steve Morris fan and have been fer years my steve morris Big Block is waiting fer me wen i get to heaven lol at 12:59 she sounds so good, very ueful ifo Sprinkeled throughout ur video Way Kool

I experienced a surprising amount of response from charging the lash on solid roller cam in my old hot rod way back when .

@internationaldynoauthority693

5 ай бұрын

Yes, during this video we actually made a very large change and tightened up the lash more than 18,000

awww the flying toilet daze

Its a lot easier breaking them in on gas! Very good results though, that’s impressive!

@internationaldynoauthority693

6 ай бұрын

kzread.info/dash/bejne/gHmsj5SepNvgmqQ.htmlsi=5TSGhVeqq_kK-3_T

@internationaldynoauthority693

6 ай бұрын

Agreed

The block heater is a great idea! Did You use a thread in diesel style, or is it race car specific?

Awesome video gotta love methanol burning engines !! Do you guys run any top lube in your alcohol ?

What's your guess it would make with racing gas instead of methanol?

What was your total timing number? I also run a Ron’s flying toilet on my 505 bbc and I’ve been teaching myself to tune this setup and can use any help with total timing. I haven’t been able to get a complete run to look at my plugs. I use all MSD ignition with their crank trigger setup. Thanks

I was listening about the injection system. So is that mechanical injection into one big mechanical throttle body?

@internationaldynoauthority693

6 ай бұрын

There are separate nozzles, There are NO injectors..... Fuel is delivered at pressure through a nozzle...... Continuously.

@internationaldynoauthority693

6 ай бұрын

Yes, the answer also to the throttle body portion is that it's one big flap. That opens up to allow the air in. You are correct

Does the block heater evap the alcohol?

@internationaldynoauthority693

6 ай бұрын

Separates. the oil from the alcohol....helps remove it, for your evacuation hoses

Th as t injection looks like the setup on my 97 Sonoma 4.3

@internationaldynoauthority693

6 ай бұрын

It's an older style of setup. Inside. It doesn't look anything like a 4.3. But, a lot of guys use it. It works fine. It is definitely not as good as a modern day. Gasoline carburetor. Put that same engine, on q16. And put it on a good carburetor. You're going to make another 100 horsepower. And going to run a lot better start a lot better. But this is what we had to work with. And, in the end it was awesome. It ran good at started good and it was just a lot of fun

Who car is this going in?

@internationaldynoauthority693

6 ай бұрын

It goes into a 1900 lb eighth mile drag car

3:06 The joys of methanol milkshakes.

Rpms must be 14000 with that crank pulley

@internationaldynoauthority693

6 ай бұрын

Yes, the pulley is always two to one. So if the RPM or 6000 the pulley's going to pull 12,000..... That will make about 160 lb of fuel pressure to 165 lb of fuel pressure at full RPM

@user-kw7zb8qw1u

6 ай бұрын

@@internationaldynoauthority693 happy new years I hope u lean out at redline or top rpms not idle God bless chts must be below 400

@internationaldynoauthority693

6 ай бұрын

@@user-kw7zb8qw1u 5.1. To 5.5 from 3800 to 7500. Spot on AFR

@user-kw7zb8qw1u

6 ай бұрын

@@internationaldynoauthority693 Allen Johnson pe V8 18 liters plus or Sherman 19 liters plus V8 or Merlin 27 liters plus V12 or Harry a Miller W16 aircraft with Napier blower or Darren no injectors nitrous nozzle instead two per cylinder magneto magnetic 🧲 gears with titanium clutches sure is pretty they running in small boats 273 mph 3.195 ladies gentlemen they ripped off track record in 2018 Az

@GriffonGrowl

6 ай бұрын

@@internationaldynoauthority693 actually, fuel pump turns 1/2 of engine speed...

Dyno operator is goofy AF

@internationaldynoauthority693

Ай бұрын

Thank you, we appreciate your positive feedback.

Hey there ive read your reply and by all means i meant no disrespect as i do have a little harsh way of speaking which can come off as an asshole. I just hate seeing cylinders constantly getting washed in fuel and ruin the cross hatching and rings especially on such an amazing piece. Ive ruin lots of engines myself by fuckin around with early efi systems

@eddieshabazz5603

2 ай бұрын

I also totally forgot to mention the block heater trick definitely arose from thousands upon thousands of dollars in oil changes alone and research and trial and error. Also wouldn't it be better to get it started and get it to a relatively decent operating temperature? By saying that it's pretty obvious that to do that it would most likely be easier to quickly swap the toilet out for a carb for that process and then swap it back because for the reason that from gasoline compared to methanol the quantity of liquid to liquid is not even close to each other. Listen it's clearly obvious that it isn't you gentleman's first rodeo but i just thought I'd make a suggestion whether or not it's a decent one or not remains to be seen lol. But I'm sure I'll know if u respond. Cheers men

So tell me one good reason why in 2024 your primitive flying toilet isn't flying into the dumpster. To have a beautiful high end engine like that and to not have complete and accurate fuel control is an absolute joke. Sorry to rain on your buddies parade but he needs to get out of the stone age.

@internationaldynoauthority693

2 ай бұрын

When competing in a class where ALL electronic controls are prohibited, you have a few choices: Carburetor, flying toilet, mechanical injection. While it would be nice to go straight to a dual injection,all run from HALtech. It would move his vehicle to another class. TRY to think of ALL sides of competition.... Rules are in place to maintain certain aspects of competition. Classes are put in place, so you CAN, run on a budget ......and have loads of fun. While tuning a Haltech would be a lot of fun. And would be certainly much more intricate, we would have a lot more control. Unfortunately, or, fortunately, in this case. It's not allowed. And, these guys have a lot of fun on a week-to-week basis. They can keep their budget down under $30,000 for the entire season.

@internationaldynoauthority693

2 ай бұрын

Our customers arrive, with every manner, of control unit for fueling. We are a tuning shop. Shop. Are not here to tell customers, that they should use this type or that type of injection or fuel. We are not here to make excuses for them either. We are here, to tune them, with in the absolutely best Bubble of perfection that we can based on, what they bring. Tuning is tuning in is tuning. Is tuning. Whether it's a carburetor either, or a Haltech.