iv been using exactly same for 16 months around. no problems. control every aspect of music from each speaker. hear things u never new was on a track. ✌

I've been running these DSP's for a while. There's also the Prv versions, same exact thing. You're going to love it, very customizable and you can dial it EXACTLY how you want it. So much to say about it really. I'm very happy with mine, I run this exact model. You can tweak the mids and highs however you like, making a full active front stage super easy. Be careful with tweeter crossover points. I'll just say cross them high if you want power handling. I've found out the hard way. So configurable and easy to use really. You can even set a limiter, with fine adjustment, so if you go ham fisting the volume knob when your demoing hard, you don't blow shit up. 😂

That thing is amazing it's like a real studio sound

Ya I just bought 1 a few weeks ago I have been meaning to install it and start figuring it out, hopefully this weekend so much to do but so little time to get it done, they are badass and I cant wait to use it.

Awesome thanks for the info. Been thinking about getting one. 👍

@JacobViral

2 жыл бұрын

Your welcome Travis

Really cool DSP. I wish there was a USB connection. So you could go through the settings much faster.

This seems to be good for OEM head units that are only running a Kicker Key loc or lc2i.

So is this a was to hook up 2 or multiple 4 channel amps?

what do you think about the STETSOM STX 2436 Bluetooth DSP?

I have debating between the stetsom, prv, taramps and expert electronics dsp's they are all super cheap dsp's but I think I might go with the extremes version it seems to have the most features and the only one that has Bluetooth connection and an app to use. I think it's actually cheaper than the rest at like $99

Just got a dsp from deaf bonce, gonna use it to crossower mids, and hights, and the L7's in the trunk. They say that a active crossover is more effective then a passive one, and i think they are true. And ofcourse be able to exactly correct the speakers working hz, according to their data, not a generic passive crossover curve, thats gonna be nice :)

I have one of this in my truck. Still learning how ro use it. But what i dont like i get engine noise i dont get it with my crossover. Im using same wiring as the crossover. But i like the DSP.

Great DSP for the cost I've used an installed many

These dsp is better for mids and high . The clarion crossover better for the bass

I might get one I heard that they were good

Another good thing about this DSP is the output voltage is less than 2 volts so it is safe to use with all amps including Brazilian amplifiers like a Taramps.

@brianbelcon8723

6 ай бұрын

The output voltage is 5v bro

I have it but need to learn how to use it

Um dos melhores do Brasil 👏🏻👏🏻🇧🇷✌🏻

@ADRIANOELPATRON

2 жыл бұрын

Sim eu uso é excelente

DSP full connection kaise karenge

I don't understand how you did the RCA's. I'm new to using 4 channel amps. Just installed mine. So you used only the 4 channel amps RCA's? So the front in the input and the rear coming out of channel 1 on the DSP?

@JacobViral

Жыл бұрын

Correct

Should've got the stetsom 2848. Almost the same price and it's the upgraded model. More outputs

Wouldnt this be a 8 channel as it has 8 indapendent channels left and right in a set of 4

A DSP is a must to force a fully flat signal that everyone is looking for. Boosting the signal will only increase distortion & no one wants to increase distortion & lower there maximum output.

I just got one of these and I love it! It is so useful and easy to use. And the features are numerous. If you are looking into getting an active xover spend the extra $50 and get this product. It will crossover all of your line signals, you can use it as an EQ

@evan.norwalkcalifornia562

2 жыл бұрын

Were u purchase it from

@freshbutplain1144

2 жыл бұрын

I don’t see it for $50 I see over $100

@jacoblittle3209

2 жыл бұрын

@@freshbutplain1144 I was saying an extra $50 over the price of an active crossover. 8 think I bought mine for around $150-170

@freshbutplain1144

2 жыл бұрын

@@jacoblittle3209 ahh I see. I misunderstood.

I've got the PRV one. It's identical to that one. But it's changed my sound greatly! Especially cuz I gotta use a Lc2i. I love it!

@col98

Жыл бұрын

I’m also using an lc2i with my setup and been thinking about a dsp. Did it make a big difference with your subwoofer quality and performance?

@1ohmwrecker

Жыл бұрын

@@col98 insane difference! Helped the drop off created by the Lc2i. Bass is deeper and cleaner! I think I got a video on my KZread bout it? But it made a crazy difference!

@col98

Жыл бұрын

@@1ohmwrecker thanks man! I’m definitely gonna get one, I checked out your channel car is clean asf and subs pound. Subbed 🔥

@1ohmwrecker

Жыл бұрын

@@col98 best $100 you can spend man. Takes a bit of getting used to setting up. But check back with me after you do!👍

@col98

Жыл бұрын

@@1ohmwrecker will do man! I may not install it till after winter though 😆 we’ll see what happens!

Thanks no one ever really did one

@JacobViral

2 жыл бұрын

👍 thanks for watching

Big benefit?

When this DSP is off , do the sequence 1,2, and 3 lights stays on?

@JacobViral

2 жыл бұрын

Device should be off when off so it doesn’t kill battery overnight

@douglasmitchell2413

2 жыл бұрын

@@JacobViral it’s goes off just them sequence 1,2, and 3 light stays on but the device goes off

Can I run a 2 channel LOC to a 4 channel Dsp

@tigeryorkie07

2 жыл бұрын

You should be able to. Just use a "Y" cable RCA splitter.

Hi, Can you please help. I have a wining high pitch tone in all of my speakers from installing the dsp. I have good ground and i have moved the rca cabels so they dont touch any power cabels and this is my second dsp, I had one before with the same problem so i changed to stetsom insted because I thought it would help with the problem. But is there some setting in the dsp or is it alternator sound? Like it doest sound like alternator wining because its the same tone it doesnt go up and down like alternator wining..... Please help (:

@JacobViral

11 ай бұрын

Tried new rca cables? Tried adding additional new grounds? Bad head unit?

@Caluy

11 ай бұрын

@@JacobViral I have 2 0 gauge cabels to ground in the seat belt thingie and good rcas and original sterio but i found the problem it was that the gain was to high for the dsp so i just lowered it and set it to the dsp so it works great now (:

@delroypatrice1011

10 ай бұрын

​@@Caluy which gain was too high(the head unit)

@Caluy

10 ай бұрын

@@delroypatrice1011 on the amps

DSP ka ful demo please

Audio control!!!!

I need help with mine bad located in Pooler too

@tigeryorkie07

2 жыл бұрын

I have the Stetsom STX 2436 Bluetooth Digital Audio Processor Android Enabled Equalizer, it's the bluetooth version. I might be able to help you.

@Phatwhipz

2 жыл бұрын

@@tigeryorkie07 I just need help setting the tuning and have no clue about input/ output parameters

@dantejimenez2679

2 жыл бұрын

@@tigeryorkie07 I have this 4 channel but i was looking into the bluetooth since it's easier looking through the settings on a phone than. is the bluetooth version missing any features besides the sequencer?

I dont like this stetsom 4 channel i rather the prv 8 channel because the stetsom u can not separate each output to get left and right

@Rah-know

2 жыл бұрын

What chew mean? It’s mono channel on the input??

Is a loot good Brazilian processors...JFA for exemple have a Nice interface tons of configurations and Full bluetooth ajusts on smartphone ✌️✌️

Got one still in the box from audiopipe

@HardKnocks160s

2 жыл бұрын

Selling ?

@djkeys415s

2 жыл бұрын

@@HardKnocks160s my son claimed it..

Could you tune your subs using this also

@JacobViral

Жыл бұрын

Yes a lot use these for subs also

@dekeviusedwards7766

Жыл бұрын

Thanks

@dekeviusedwards7766

Жыл бұрын

One more question what’s the first set of rca do I run from my cd player to the input on the stetsom ??? I’m running 3000 watt smart 3 and a ct sounds 1000 watt 4 channel just to let you know my setup…

Jacob ill give 50$ for that stetom stx2448

“I’m gonna get this installed...on a folding table outside my vehicle.” I don’t think you know what ‘install’ means.

@JacobViral

2 жыл бұрын

Whether it’s installed on a box, amp rack, back of trunk, table, etc all the same?

No way bad ass

7:52 calm down bro...your brains going faster than your mouth

Spade terminals no,no , no I wouldn't use that

@evan.norwalkcalifornia562

2 жыл бұрын

Y

@moneycat3789

2 жыл бұрын

@BEATING NCP93 I would recommend the terminals on new amplifiers

@holeshotinspectionllc2412

2 жыл бұрын

@@moneycat3789 There Tiffany Style RCA’s, not the one’s on this DSP, the RCA’s your referring too🤙

Sorry nothing but issues from Stetsom products for me.

@JacobViral

2 жыл бұрын

What happened?

@alphaomega8373

2 жыл бұрын

@@JacobViral Make sure you secure the rcas so that there not ever vibrational movement. For me it was issue with the inputs. Bad solder job... funny I had the exact same issues with both the DS18 X-over and EQ. I know im the common denominator but, this is over a course of six years and different builds.