Thanks for all the knowledge you give

Looking forward to this video

I just got mine in the mail today just have to build my box now for my vxf and I'll be good still have to save up a little more money so I can buy another vxf and do my electrical upgrades and I'll be good again

Hey man, first off, I've enjoyed many of your videos. Thank you for the content! Second, I just was curious what that device is that you're putting the speaker load into...

@HiFiVector

6 ай бұрын

HiFi Vector DL-14

I'm adding one of these amps to my system and it has a 130amp alternator and I'm running a 4 gauge wire with a 200A fuse. Itll be pushing my Soundstream T5 10's.

Going in the winnebago! Yes sir. RV baby

I’m using mines the 2ohm version on two pairs of bnc 6s for my mids works perfectly

@HiFiVector

11 ай бұрын

Great little amp

Wow, nice numbers for a great price.

Thanks for the dyno! Want to add something however. Every person I talk to when I'm fixing something for them or whatever, I turn everyone! Away from so called "bass knobs" . They don't magically give you bass boost. They adjust the amps gain. And like everyone knows more gain means more distortion and in return clipping! So unless you have something like a Rockford Fosgate punch or power series that has a actual bass knob (punch EQ knob" ) They shouldn't be used at all. At least with this amp in particular you can adjust the bass boost frequency then add a very min boost if need be. If the amp doesn't have a adjustable frequency the boost should never be used either. And if you want to adjust bass from the front for each song individually buy a good quality Equalizer and do it cleanly without distortion.

I have this amp & it's a dream I use it in my daily 3or 4 hrs a day & it gets down I'm gonna buy a second 1 for my wife's truck I'm on board .

@SteeltechPC

9 ай бұрын

What gauge wire are you using and what's the output of your alternator? I'm adding one of these amps to my system and it has a 130amp alternator and I'm running a 4 gauge wire with a 200A fuse. Hope it works.

@Clare.1985

7 ай бұрын

​@Evanseerp how'd yours work out? I'm about to do the same thing only im using true 4 awg ofc , a tru-spec 5.5 farad capacitor with the big 4 done in 1/0 ofc. Hoping for the best

@SteeltechPC

7 ай бұрын

@@Clare.1985 I ended up upgrading to 1/0 gauge wiring because the ends of my wiring were melting. Since upgrading I haven't had an issue. The amp slaps.

@jcchaco11

7 ай бұрын

@@Clare.19855.5 farad capacitor is just a waste of space honestly they have to be super caps to do good

Would the fans in this amp be too loud for a daily driver truck install??? BTW I out 2 Brutus 10's in my living room and loving those with a Crown xls2502 pushing them... Thank you

@HiFiVector

Жыл бұрын

No I don’t think they’d be too loud at all. Thanks for watching!

Decent amp 👍😎

did you try it on subs? how did it sound? I'm curious but heard they don't last and bare vids says the parts quality isn't great.

@HiFiVector

Жыл бұрын

Yes briefly and it sounded good.

It looks to be a great amp, as for the reason for 4 gauge inputs I could be that full bridge amps require less voltage to achieve max power???

@HiFiVector

3 ай бұрын

Partially true but for that amount of power you still need 1/0. Some companies just expect you to use 1/0 to 4gauge reducers.

Wonder if it do .o5 ohm

How does this compare to the soundigital 3k? Great videos

@HiFiVector

Жыл бұрын

The sound digital are very good but for the money, taramps, Soundstream TXP and STETSOM are all good.

Do you think a bstock would be a good ideal? I found a bravo bstock I’m thinking of getting

@HiFiVector

3 ай бұрын

Not sure just depends on why it’s actually B stock. Was it used and abused and returned or maybe it just has a scratch on it?

What would be the difference between this amp and the DB3000? The DB3000 is $100 more, so just trying to see the difference... Thank you!

@HiFiVector

Жыл бұрын

The DB amps are supposed to provide better low end frequency power. From what I hear some can tell the difference and some say they can't tell a difference form the EX or vulcan and the DB series.

i use this amp, but my subs dont hit as low or hard as they did on my older kenwood 1k. i think this would be an amazing full range amplifier though, im going to test some 3 way 6x9s soon.

@eddiemaravillas9879

Ай бұрын

Do u have stock electrical bro?

What reducers did you use for this amp they look they fit perfect

@HiFiVector

Жыл бұрын

These are the reducers I use. amzn.to/3pwvOCC

My alternator is 150amp its a standerd alternator and also have a 200ah litihum in the boot will this amp be fine to run or will i need to upgrade alternator ect..

@HiFiVector

5 ай бұрын

Just to clarify you have a 200ah lithium?

What hz was this test ran at? Would 2ga awg be to small to pull 300amps?

@HiFiVector

11 ай бұрын

40hz you won’t pull 300 amps in the real world. Be cause if impedance rise. But as far as wire size goes it depends on how long the run is and if your using OFC or CCA wire.

Thinking about using this on a single resilient sound 18 2000rms

@elvisjimenez8643

Жыл бұрын

Yes

Look on KZread alday,u won't find a logic mono amp Dyno...it's cheap probably won't do much but I never know.ill be waiting for the Dyno ✌️

@bkh5746

Жыл бұрын

Logic soundlab i got one prob 1800 watts.i set mine at 1600 on sundown u15 it bangs

I bought this amp last week for my l7 12 and I broke my box the first day. If the amp explodes I'll comment again

What would be the best RCA bass knob for this amp in your opinion?

@HiFiVector

Жыл бұрын

Any one really. even the cheap ones on amazon work pretty good.

@TheWjbrown37

Жыл бұрын

Use this for midrange speakers, I promise you'll not be disappointed. This is not a good sub bass Amp.

I have 2 evl 10 skarr i wonder if I can used it

@HiFiVector

10 ай бұрын

You can use it for sure. You will have a little extra power to counter impedance rise.

Whats the difference between this and the stetsom Vulcan series?

@HiFiVector

11 ай бұрын

Vulcan is the newer model

Curious how would you control the volts in a car? RMS Power at 1 Ohm 12.6V: 3000W RMS VS RMS Power at 1 Ohm 14.4V: 3350W RMS

@HiFiVector

Жыл бұрын

They are just giving you the power output at different voltage. Some people have standard alternators and batteries and some have upgraded alternators and lithium batteries that run higher voltage. And have more amp capacity / less voltage drop.So they give you both ratings so you know what the amp puts out compared to your system voltage.

@agent363

Жыл бұрын

on stock electricity you can just imagine that numbers to see,, voltage drops under 11V often on burps and hard bass songs.. Must have at least 180A alternator and another battery in trunk if you want to feed 3k amp properly. For daily normal use you can install it on stock electricity but must be very careful to not burn amp with low voltage drops.. maybe just turn Gain a little bit down.

@markrightnowar812

Жыл бұрын

No with this amplifier you need a high output alternator and at least 1 extra lithium battery in trunk and if your looking for 14.4 volts just get a high output alternator that does that voltage

@markrightnowar812

Жыл бұрын

if you use stock electricity with this amplifier it will fry in less than a year

@Manicbipolar711

11 ай бұрын

I got mine hooked up to 220 alt and 200ah lead battery bank. Mine starts to clip at 2200 watts, I just wish the clip light came on to let me know. Ended up blowing up my subs. Decided to hook up the oscilloscope and sure enough it clips at 47v

What is best efficiency amp you've tested , lowest alternator pull, need 2ohms 1500watts

@HiFiVector

Жыл бұрын

Hard to say, what is the best because a lot of amps are pretty decent and then some are not so decent but the tar ramps, Soundstream txp, Stetsom are good and for fullbridge the D4s amps, skar, surge, Hifonics BRX are decent as well those are just a few there are a lot.

@Contact_Info

Жыл бұрын

@@HiFiVector but they have poor efficiency correct? Rockford Fosgate has high efficiency like Korean boards.

👍👍👍...

Audiopipe aphd 3000 F1ohm Dyno Test.

@pauldesvignes2982

Жыл бұрын

How to set it

Was gonna get one but got 2 jp33s instead

@HiFiVector

Жыл бұрын

Those jp33 are nice amps

This amp look very good, i have 2 subwoofers 12" 1500 rms each one, which amp do u recommend me? Taramps HD 3000, Ex3000, Vulcan 3000 or MD3000?

@HiFiVector

7 ай бұрын

Vulcan or md.

Which is better taramps or stetsom

@HiFiVector

10 ай бұрын

They are both good but I think taramps in my opinion.

@ricefamily1381

10 ай бұрын

@@HiFiVector taramps 3000 hd?

Bargain at $207. Run 3 at 14.4 and you have 10k for $621. That’s crazy.

@HiFiVector

Жыл бұрын

Yep great price for the power you get. And this thing held up to the Dyno like a champ so that means it’s pretty tough little amp.

Ilove mine pushes three 12s

@marke.8334

4 ай бұрын

How is the amp holding up? did you set the HP just below the first hash? I just got mine about 3 days ago I have it pushing two brand new cerwin Vega x max 12s and it slams .

@marke.8334

4 ай бұрын

How's it holding up? Do you have the HP set just below the first hash? I just got mine about 3 days ago I have it pushing two brand new 12-in cerwin Vega VMAXs , It slams

This amp VS Taramps 3000?

@HiFiVector

Жыл бұрын

Depends which taramps 3000 they have a couple models

@bassinmycar

Жыл бұрын

@@HiFiVector I ended up buying a Taramp HD 2000 1ohm. Was looking at the manual, says this little thing requires a minimal 115ah from your battery. Also says to use a 115a fuse,? Is there such thing? I have some 100a laying around.

@HiFiVector

Жыл бұрын

@@bassinmycar Check out my video on that Taramps HD 2000. It is a great amp but it puts out a lot of power you should use a 150 bare minimum or really a 200 amp fuse. You may blow that 100 amp fuse pretty easy with this amp. The battery thing is them just making sure you have the electrical to handle the amp. as long as you have good enough electrical you'll be fine.

@bassinmycar

Жыл бұрын

@@HiFiVector got a 200a in the trunk, came with my scar 0 kit. Also got a bigger alt coming Monday. My subs are going to fry lol only 1200wrms.

@HiFiVector

Жыл бұрын

@@bassinmycar lol you will be good :)

How does it compare to the TPT 3000? Have been able to try that one yet?

@HiFiVector

5 күн бұрын

Haven tested that one yet.