I hope you like this project. Help me on: www.patreon.com/ELECTRONOOBS Join my Q&A: www.electronoobs.com/eng_preguntas.php Thank you/Gracias!

@mubashshirahmad7299

6 жыл бұрын

Electronoobs my arduino shows 0% memory help me what to do?

@pratheekkotian1550

5 жыл бұрын

I need to program a motor to rotate for just 5 rounds ...how is tht possible... plz reply(pratheekkotian5@gmail.com)

@MSVSanjok

5 жыл бұрын

Electronoobs + MS1,MS2,MS3 ? I connected the driver in micro step mode (1/16). In this mode, the engine runs smoother, better. Help change code. What exactly needs to be changed in the code to work correctly? Thank.

@sonerogarcia

4 жыл бұрын

What's the lowest speed you can achieve?

I have recently found your channel and find your projects useful and easy great tutorials as well thank you for your videos!

*THIS IS ONE OF THE BEST EXPLAINED AND PRESENTABLE ELECTRONIC DIY VIDEO I EVER WATCHED. YOU ARE AS GOOD AS AFROTECHMODS AND GREAT SCOTT OR MAY BE EVEN BETTER.*

Hey, I liked this video so much (also your necklace) Great videos Your greatest fan ever

This is an amazing video. Thank you for explaining everything so clearly. There is so much great info to learn here. New sub.,Well done, man!!

Amazing work, man. Fantastic! 😀

A very well structured tutorial and easy to understand.

When you receive the belt it would be cool to add arduino camera functionality to the slider. Thanks for sharing.

Very nice bro, you're my motivation, the things i want to make, and suddenly your video appears saying I'm here... Love from India, also you look very nice & Handsome.

You make my sundays more Awesome!!

Good work bro .

excelente as always... saludos desde venezuela...

Nice video man :) always on Ted to make one of these but it never got to the end of the project pile :D

Your each and every video is arsome bro keep doing

Very cool and great video and explanation, thank you.

awesome project man !! thank youn

Good driver plate design. Good for DIY.

Very nice and clear video. Thank you.

Excellent project

Early villain here, but I'm slowly learning. Thanks for the video, now I'm one step further to taking over the world with robots. Thanks!

Nice. Thanks for the help!

So, if you ever want to add to this type of project or take it another step further, I used to have a DIY photography studio I built for selling high end bicycles on eBay before my disability got too bad for me to work like that. When it comes to product photography there isn't a lot of good information on YT especially when it comes to larger product photography. I built a rotating stand that I put a whole bike on using the base of an office chair with the actual chair removed. I put a large platform on top of the rotating stand. I made a little disk of paper with index marks and took pictures of the bicycle one at a time rotating it just a little bit between pictures. I really wanted to create an automated system for this. Camera sliders are ok for people that want video effects but I think there are a lot more people that want to or should improve their photography skills on places like eBay or even small businesses with e-commerce websites. That's a big audience that isn't very well served with YT content IMO. If you tagged and titled a video well you might be able to reach a more broad audience by posting something useful for the photography nurds. The biggest problem I had while manually rotating a bike and taking pictures was that it took ages to get everything setup for each shot because the bike had to be absolutely still before I took each picture. I really wanted to build a setup where I placed the product on the stand, pushed a button, and then I could go off to write my listing details while the camera did it's thing. This kind of setup can be scaled to any size, however, if you really want the best setup for lighting an object for photography, you should rotate the camera around the object instead of rotating the object in front of the camera. Someone without experience might not understand this, but it is more important to keep your main lights at 45 degrees to the camera. When you rotate the subject you will get bad lighting situations where you must modify lights and reflectors to perfect the shot. If I could build the perfect photography setup I would build in the ability for the camera to rotate around the object while also adding a slider that could raise and lower the camera. All that said I was selling bikes for more than anyone else was getting for the same thing on eBay, but I was hosting images to place in the description of listings along with videos and adding more details than anyone else has ever done on eBay... So this advice is from someone that was really trying to push the limits. Not everyone is interested in such things, but I did a lot of searching and didn't find much at the time. I'll add a linked example of what I was doing back then in a reply to this. -Jake

@UpcycleElectronics

6 жыл бұрын

Link to a video example of my old product photography results and style I just referenced above kzread.info/dash/bejne/ioN2sMF-nMe7idY.html

Great video, If I knew half the stuff that you know about this electro technic stuff, I would be soooo much smarter than I am now....

Nice one bro.

ohhh love your channel man 😁 i still support u 😂 dont forget me 😊

cool idea and nice Banana as well my friend.

Great project! Very well presented video, with helpful animations! Nice work! I'm curious, what is the fastest amount of time the nema17 can push the slider (loaded with a DSLR) 1m distance?

Интересный проект! Молодец!

With simple buttons like that you should use pinMode(pin, INPUT_PULLUP) rather than add a 10k ohm resistor. The INPUT_PULLUP will add an internal pull up resistor that is already inside the atmega 328 that is on an arduino, so one is not needed on the button.

Great tutorial video thank you for explaining everything in detail, i just completed making my slider like you explained but i want to use it to do time lapse videos , how to make motor run for more than a hour?

Nice project man! It what if I want to start from the middle? Also how slow can it go? And is it smooth at low speeds? I want to use it for panning time lapses so it needs to be smooth and very slow

@ahinchcliffe

6 жыл бұрын

for time lapse why not check out one of my instructables for an arduino based motion time lapse rail and take a look at some of my videos for example time lapse's www.instructables.com/id/Ooznest-Ustepper-Motion-Time-Lapse-Video-Rail/

que trabajo mas bueno!! es justo lo que buscaba. este tutorial noi lo tendrás en castellano por casualidad no?? un saludo

Banana 🍌 is happy sliding 😅😅😄😄... jokes apart. Awesome n useful tutorial. Keep it up

Hey I liked your arduino necklace

luv u bro....

para cuando haras tu propio , interfaz para step motor y drive, así como hiciste la serie de videos de radiocontrol?

Nice project. How did you measure the with of the platform so that the bearings in the middle just fit to both sides of the tubes? and by the way you can omit the pulldown resistors on all switches if you use the internal pullup resistors of the Arduino. The only thing that changes is that you read out a LOW if the button is pressed instead of HIGH and connecting the wires is a lot easier. Oh, and never use "delay()" inside a interrupt routine this not only bad style it also can have a lot of bad side effects. :)

It would be very good to add another limit switch.. I will try your code soon

Great project. Now, can you add a pan head so that the camera can turn to face you as it moves along the track?

good job but it will be better if you add acceleration and deceleration to the movement

@amusklb

5 жыл бұрын

Im searching for that kind of code, with acceleration, but I Can't find. Maybe You can help me with this?

I love your concept & am in process of building mine now. This is my 1st Arduino project & I am somewhat lost. Purchased a kit & trying to utilize the tools I have. Instead of the push knob, I have a joystick.. Are you familiar with this? Has MH, GND, +5v, VRX, vry &sw on it. Will I have to add any programming due to this joystick?

Did you connect the MS1, MS2, MS3 modes to the micro-step?

Your voice is cool 🤗🤗🤗

Thanks for your tutorials. I have a project and I know the code and setup must be very basic but here it is. I want to create and adjustable time the stepper more turns in a certain direction when a button is pressed. The project is the rig it to a wood working machine in order to create dovetails. Please could you assist me with code and setup for this. Many thanks in advance

Can you make a video for sensored BLDC motor controller for 48V motor?

Good day sir, can we program the slider to move from left to right on a certain distance on for 5 time then proceed to a next station. We are creating a project in where we will make a stations for the whole slider sir. You are one of our inspirations thank you sir and may God bless you

I just learned a new method to TRANSPORT a banana! Thanks buddy! :)

Bro make a project of gimbal steady cam of 3 or 4 axis using servo motor as gimble and arduino and joystict to control direction and rotation

you should have used the timing belt and just adjusted the side parts that mount to the rods closer together

Is it just me is his voice really easy to listen to?

How slow can it move? I’am looking for to do one that can moves very very slow, like vinyl player head stylus.

HEY ANOTHER NOOBS PROJECT>>>>> YAY!!!!!!!!!!!!!!!

Can u suggest me a good 3d printer under a budget of 250$ which i can get on banggood?

how to control steps movements, like lets say we have 400 linear points to move one by one and i need to move pointer in following example sequence starting from 0->10->240->45->28-> .......... -> 400 . How can we automate this ..

Which is the software you used to make that animations of these 3d printed parts?

Hello great Master!!! :-) I need to replace the LCD with a 0.91" 128x32pixel OLED and i have no idea how. I use the U8g2 Lib. Can u help me, please?

@Electronoobs + MS1,MS2,MS3 ?

Please what are the dimensions of the bearings please ? For 16mm diameter tubes like in the video ! Because i want to realize this project but i don't have all the pieces and i don't know which pieces i need to choose on Amazon ! Please answer rapidly if you can !

Cool wall bra....love it

How is the 12v to VIN pin not friyng the nano board?

Hey so can i use this as an 3d scanner base holder??

Help! Помогите, кто в теме, пожалуйста! Я проект повторил и вроде бы все нормально. Работает, паркуется в конце, но не тихо и не столь мягко. Подумал переключить драйвер на микрошаг 1/16. И, о чудо, реально супер-пупер, микрошаг рулит. Но, учитывая разницу 200 шагов в полном шаге и 3200 в микрошаге, нужны изменения в коде. Я по разному пробовал менять значения в скетче, но желаемого результата не достиг. Прошу помощи у знатоков ардуино, подскажите, какие именно внести изменения в данном скетче для микрошага 1/16 ( 3200 шагов на один оборот) . Спасибо!

Can you make chess playing robot using robot arm and computer vision

Any chance you will build a fishing simulator with stepper motor?

You remind me of greatscott

Hanzhen harmonic gear , robot gear, , over 30 years experience

Dear friend iam a beginer in electronics and in 3d printer and i want to learn drawing and printing my own shapes for my projects so can you tell my for a programs to learn drawing from 0 or can you make a playlist about drawing please reply

@Taconiteable

6 жыл бұрын

Fusion 360 is a nice program. There are a lot of tutorials available

Hi from Ukraine, its really difficult to me to understand and to write a code for project that I’m trying to realize, maybe if u have some time, u could help me , so: is it possible to modify your scetch to control motor only with encoder , i don’t need direction change, i want motor to start rotation when I’m pushing encoder button at once, and stop when pushing it again, and also i want be able to increase or decrease motor speed by rotation of encoder clockwise or anti clockwise, i really dont need lcd screen, but it will be really cool to visualise motor speed using “progress bar” which consists of , for example 10 leds.... could u help me with this? Thanks a lot. Ps. Using same configuration of hardware:)

Hi i wanted to make a square shaped channel , but i am not able to achieve that . Can you help me by giving some idea ? Actually i want to make a wall robot which travels in a square shaped manner by the help of a motorized square channel.

What 3D modelling software did you use?

@MrKistenJack

6 жыл бұрын

Looks like Blender

Where I can buy this motor.... please provide me link sir

Dude i have question about brushed drone 😅😅😅 .can i ask you .pleaseee😶😶😶

@ahmedhasnain3051

6 жыл бұрын

CarToOn WORLD 555 i am also making drone .but have problem to make drone .PROblem is to understanding between two modules .

@aniketshinde6743

6 жыл бұрын

CarToOn WORLD 555 plz ask me I'm also making it right now

@cartoonworld5557

6 жыл бұрын

I HAVR PROBLEM IN GETTING SIGNAL TO 1 RF24 MODULE TO ANOTHER MODULE . I MADED RECEIVER . BUT GETTING PROBLEM IN TRANSMITTER.

@cartoonworld5557

6 жыл бұрын

Just check chennel "electronoob" . Video name ."Brushless drone " Check transmitter code . And say that all code are perfect or not ?

@aniketshinde6743

6 жыл бұрын

CarToOn WORLD 555 bro yes I know what are you talking about and Im constructing hardware now and yes I compiled and uploaded the whole code trans as well as receiver of brushed drone (coreless motor). double check your transmitter's soldering connection may be it's not connected to arduino properly and also which module you use I advice you to use nrf24l01 normal module and not with power amplifier bcoz I heard lot of people says that this module isn't work sometimes can we discuss on WhatsApp about the same it will help me too if I face any problem in my project

WHATZZZUP MY FRIEND HOW TO GET CODES?

Good evening ! I can not compile. This line is selected (lcd.init (); // Init the LCD) And it shows this error: 12: 0: File: \ slider \ Slider \ C: \ Users \ Darth Note \ Documents \ Arduino \ libraries \ liquidCrystal / LiquidCrystal_I2C.h: In function 'void setup ()': C: \ Users \ Darth Note \ Documents \ Arduino \ libraries \ liquidCrystal / LiquidCrystal_I2C.h: 154: 9: error: 'int LiquidCrystal_I2C :: init ()' is private int init (); ^ Camera_slider_code: 59: error: within this context exit status 1 within this context Help me please !!!!!!!!!!!!!!!!! /\O

Test? Testttt

What change I have to do in code if I don't using i2c interface circuit.

@nationalmarketing3082

6 жыл бұрын

Electronoobs please reply me.

@user-jo1mz4se4j

6 жыл бұрын

You need to use standard LCD library, connect LCD to Arduino (if there are enough pins) and then instead of initialising LCD_I2C object, you initialise object of LCD class with pins that you want to use. I hope you understand me :)

@nationalmarketing3082

6 жыл бұрын

Đorđe Milanović thank you for replying.

Why not 2 end switch?? Can't you programme it ?? You using most worse code fix it.

Sir,can you give me your email id please? I will send the photos of the defect in the ttansmitter and reciever pwm code please sir

Hello my friend please can you make a project including in it rfid and lcd screen and keypad and two leds and buzzer and servo please can you do that and i will told all my friends to subscribe your channel

@Assassxndev

6 жыл бұрын

it works like that : when you put your rfid tag you can open the door by moving the servo and you also can open the door by entering a password

it is a bit wobly that slyder

Please add a $20/month option on your patreon

0

how to calculate step per mm