Tire shop doesn't want to see a solution. They want to customer back in 4k miles when the tires wear. It took you a very short time to figure out the issue. Thank you for being an honest mechanic. That customer will spread the word about you.

This guy has to be my absolute favorite mechanic to listen to. Thorough, observant, meticulous to all details and methodical in troubleshooting approach.

You have some of the best repair videos on KZread! Always so helpful and thanks for sharing your knowledge with all of us! #respect

Excellent diagnosis, Doctor, and well done! And even the tire place missed it - but not you. Thank you!

It's so much different when you can have a care up in the air, as one is much better able to diagnose all possible issues. Awesome work figuring this one out Petr! Greetings all the way from South FL.

I have to say that I am BOTH BLESSED AND IMPRESSED!!! The absolute world is in desperate NEED Of MORE Hard Working and HONEST mechanics like your self!! May God TICHLY Bless you for The integrity and work ethics that you CONSISTENTLY demonstrate in ALL your videos!!! Please move to Houston, Texas!!!!!…lol 👍🏻😁😇

Great work sir.. Absolute Professional

I enjoy watching your professional quality work ethic, it is rare these days. It is nice to have commentary along the way. Keep it up my friend!

I appreciate your repair approach.

So good to see you using a torque wrench on the lug nuts. I wish every place would do that!

@cairogibson8945

2 жыл бұрын

Sorry to be so offtopic but does anybody know a way to get back into an Instagram account..? I was dumb forgot my password. I appreciate any assistance you can give me

@alexandercyrus7511

2 жыл бұрын

@Cairo Gibson instablaster :)

@cairogibson8945

2 жыл бұрын

@Alexander Cyrus i really appreciate your reply. I got to the site thru google and Im in the hacking process now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

@cairogibson8945

2 жыл бұрын

@Alexander Cyrus It did the trick and I finally got access to my account again. Im so happy! Thanks so much you saved my ass!

@alexandercyrus7511

2 жыл бұрын

@Cairo Gibson No problem =)

Another great video, you are ethical and professional. Inspirational stuff. Thank you.

This is how it's done properly. I wish all mechanics are like you.

love your videos. Very insightful.

As a DIY I have seen tires out of round . I have found them while the car was raised and spinning the wheel looking closely for high or low spots . I have also seen radial belts twisted . On very old tires it's not uncommon for them to go out of round before the tread wears out . A lot of shops play the DRY ROT Boogie Man . The slightest sign of small cracks and they try to scare you . Even if new , old tires seem to harden over time . The rubber seems to dry out .

Because all tyres & rims are balanced on an electronic wheel balancer means nothing if rim & or tyre casing has run out.

Great job! Another demonstration of good analytical skill and thinking. However, I suspect that the violent shaking at high speed could be due to one of the 4 wheels not properly installed i.e. the screws forces not in good balance. When you rotated the tires, you inadvertently corrected the problem. It’s always great pressure to watch your video!

@telecasterman18

8 ай бұрын

You actually make a really good observation!!! I saw the way he installed them and then torqued all the lugs back, I thought myself you know this guy is doing it the right way and I doubt the tire shops did it this way 😂😂😂. I’ve seen plenty of tire shops, and they always use the air impact and just give it a few “chugga chuggas” 😂😂😂

Always a Pleasure my Friend!!

This is why every tire shop should have a tire truing machine. They could modify tire balancing machines to make it dual purpose, balancing and truing.

Great job figuring out that problem!

Very thorough analysis 🧐

Professionally done sir. Well done.

Timing chain cover was a TSB. You are correct about rear stance being off. If anything, the drivers side should be lower due to fuel tank and battery being on that side. Passenger side spring hanger bushing is toast.

Great Diagnosis!

@joypage5564

3 жыл бұрын

Thanks

Its been a good 20 years since I had a similar thing happen to me - new front tires fixed it . I don't recall any blistering or visible distortions, so what I believe happened was a minor delamination of the steel belt. As wheel speed increased, centrifugal force brought an increasingly annoying out of round condition into effect So... I marked that one up as pothoe damage. - 20k miles with good tread when changed out.

Wheel alignment, rebalance tires and check front suspension for wear.

Great job, great diagnosis, he just needed new tires on d front

Thanks for sharing this video.

Nice job man i have the same issue too when accelerating.

Going back a few years some tire shops would shave high spots.

@ToyotaMaintenance

4 жыл бұрын

Thanks for sharing that

Tire shop wanted him to buy new tires so they could charge him a dumping fee for his tires they were going to resell.

My 2005 Toyota Camry XLE for some years had that kind of vibration. Took it to the dealer, they couldn't figure it out. Took it back to Sears where I bought the tires, all they would do is check the alignment (BYE Sears). Next time I needed tires I turned to my old favorite brand of Michelin. What was found by another tire place and myself also aghast at not noticing myself, Sears had originally installed the wrong tire size! New tires with the correct size...problem gone! I too was thinking belt shift in one, had the tires rotated, no change. It was in finding that the car had the wrong tire size installed and not until I replaced them was the solution found.

@ronaldhickman9953

4 жыл бұрын

Gidagorfen ....front wheel bearing on Camry..... common issue

Make a recommendation for alignment, new tire and passenger side rear leaf spring replacement!

Thanks for sharing this information.

Excellent video as usual. Thank you! :)

4:15 radial runout. There are Hunter balance machine that minimize the amount of shaking by giving the high/low spots of the wheel and tire, so that you can loosen the bead and align the tire low spot with wheel high spot. Also, balance machines have special shaft cones for toyota trucks/suv, so wheel could be centered to correctly balanced wheels Like how you look over everything for this diagnosis

@markroderick3300

4 жыл бұрын

toyota wheels should be balanced by the lugnut holes not with a cone in the supposed center they are lugcentric rims and probably could have cured most of that runout if he had a tire machine and could break it down and spin the tire 180 on the rim and reinflate it

@nordicpride9708

4 жыл бұрын

Mark Roderick True. But good luck finding a a lot of tire shops with those adapters. They are very rare.

@markroderick3300

4 жыл бұрын

@@nordicpride9708 that is true or if they have it they don't want to take the time to set it up and use it.

Where would I go about getting a diagram for the hoses that go under the intake manifold ? I’m sure i reconnected them right just would like reassurance

Great video. Thanks Peter, you mentioned there was a recall on the timing chain cover oil leak. I have a 2007 Taco 4.0 V6 us this engine covered under that recall?

It was interesting to see they used 6 bolt hubs on those 2WD PreRunners as they were usually reserved for the 4WD models.

@mitomr.twiceasnice4358

4 жыл бұрын

I think prerunners have the same suspension setup as 4wd w/o the fwd function of course. My dad has the basic rwd 5 lug and we can't get suspension parts/brake parts meant for a prerunner, thats almost 100% of the time when getting new parts.

@LAactor

3 жыл бұрын

@@mitomr.twiceasnice4358 not even at rockauto?

@mitomr.twiceasnice4358

3 жыл бұрын

@@LAactor its always a message like - not proper fit, or incompatible, or fitment not guaranteed. So we always select the parts for basic 2wd non preRunner.

Great work done.

I replaced tierods inner and outer they was bad. Then got a wobble in steering beteeen 45-55 mph that got worse after driving 10 miles or so. Turns out it was a cv joint. Found that out after new tires and bearing. No noise at all. Changed both axles now drives like a new car. 2001 Corolla

so before that, the bad tire shook the rear leaves loose too?

Please can you consider a video on Corolla clutch creaking. This is a very common problem and although there are uploads showing lubrication of slave cylinder, very often it is more than one single point requiring lubrication, such as the connection between fork and slave piston rod.

@ToyotaMaintenance

4 жыл бұрын

if it comes my way will try to film

Good job buddy👍

Good job 👍👍👍

Tire shops don’t like to admit to a bad tire but it happens. Did you tighten that leaf spring? Was it just a bracket?

Great work

my respects to you sir👌👌👌

Great Video Great Job Thank you

Yeah Mr. Toyota,,,, we wanna see your Scion!

These days if you don't have a tire shop that does road force balance as well they will never really know if a tire is 100% or not. I dealt with alot of low profile tires before and without a road force balance you can get good numbers but the car shakes like hell. And the tire needs to have it's location changed on how it's set on the rim. Also if the center cone for the rim is not right you can get the all ok from the tire balancer, but still shake like hell at highway speeds.

My 2007 Tacoma starts shaking after 60 mph, I recently put some wheels off a 3rd gen, I think I need to get them balanced 🙁

Good , great and excellent job

I just had my wheels balanced but they still shake and I think that maybe the car ran into something when the teenager who owned it was driving and possibly warped the front CV axle where the wheel bolts on is that a problem too because it looks like it wobbles out of line with the tire like the wheel is not perfectly spinning in a circle but more of a wobble how do you check for that same as just turning the wheel?

an out of round tire?

Are you located in Arcata? I also live in Humboldt and have watched your videos for a while.

I have 4runner 2006 shaking at 25 mph when accelerate slowly but with strong accelerate no shake at all. Do you know what might be the problem? Thanks indeed

Great job sir I need a honest mechanic like yo self I bought 4 new tires and balance and wheel alignment done cv axle replaced I drive 40-70 vibrating very bad can you please give me some advice on wat it could be even had them rotate the tires still no fix

Most likely, the vehicle has been driving a long time without an alignment. This will destroy any front tire. The only way to fix the problem is perform an alignment followed by a tire truing on all four wheels.

You seem to know your Toyotas and have a nice clean shop. Where are you located?

So all u did is rotate? What about the leaf springs? I thought u had a loos leaf spring on the passenger rear? Is possible a rim want bolted down correctly?

Our 2006 Tacoma had a rear lead spring recall

So what was the actual cause?? A tire had a bad spot in it? Wheel bent? Out of balance?

I'll be driving a t 65mph-80mph on FWY, when I break to slow down for traffic my steering wheel trends to shake kinda hard it's scary.

Why didn't the dealer replace all the rear springs under the recall

Great job and video

@ToyotaMaintenance

4 жыл бұрын

Glad you enjoyed it

My 2008 Tacoma starts to shake past 25 and when braking. Tires were balanced and vehicle was aligned multiple time. Took it to Toyota I got new rotors and brakes no fix. I purchased brand new tires and Trd rims and got vehicle aligned and tires balance and issue still remains. Idk what to do anymore... let me plz bring you my truck

i balanced and swapped my tyres and it still shakes at @ 110km/h, steering only. i will install new rotors then take it to another shop to get force balanced.

Great video! FYI I seen you have a Toyota service sign in your shop. Toyota does not like their logos used in independent repair shops. I know this because I ran parts & service departments at Toyota dealerships for over 30 years. Best wishes

If you ever move from California please come to Florida 🙏

Ah yes, The beautiful v6 Taco model

That's a tire problem. I have had the same problem with my 2004 Camry. The belts slip with cheap tires and crappy Nebraska roads.

@ronaldhickman9953

4 жыл бұрын

Ferdy Tacomaboy .... actually no such thing as " belt or cord slip" low grade material and manufacturing.....to be expected from Sailun....

my 09 sienna does this. its after i rotated the tires and a certain part of the road on my way to work. it also hapens over 50mph. i hav no clu wat the problem is

Anyone know where his shop is located in California? Id like to take my 08 Sienna there ✌

My 2000 toyota prerunner 6cyl with over 200k miles the steering wheel vibrates when i go over bumps at speeds of 60-65mph and above and after the road gets smooth the vibration stops does anyone have any idea as to what the problem might be? Thank you

Brake pads can be "skimming" the rotors with no smell and no obvious pad or rotor wear. This will shimmy like bad wheel balance. Test drive and check the rotor temperatures. If one is hot you can bet the caliper is not retracting fully. Replace the caliper.

Thank you so much, that's what happen to my truck. The steering wheel rattled at 40-60 mil...

What is the address of your shop so I can drop off my 2011 Highlander for you to diagnose the source of front-end vibration after replacing front drive shafts (twice!), lower ball joints, stabilizer links, bushings, tires, balancing and more. Maybe I should give it up after 260K miles and move on, but otherwise, the car still runs like new. What more can be diagnosed and/or replaced?

Too bad you are not local to me I would take my FJ to you for maintenance

i have a 2001 sequoia limited and the sunroof is stuck in teh closed position. When i push the open switch it tries to open but appears to be stuck, Could it be a lubricant issue ?

@titanjake8640

3 жыл бұрын

The cables sound to siezed. Common toyota issue

Fantastic.

How about steering wheel shake when braking at high speeds? Does that usually indicated warped front brake rotors?

@DIYwJR

3 жыл бұрын

Either that and or could be problem with caliper not saying its completely bad but guide pins that or faulty or strip can cause uneven brake wear and will eventually cause horrible braking and high speed and sometimes even notice arpund 5 mph or under when coming to a very slow creeping stop.

@pitchforkpeasant6219

Жыл бұрын

Could be front wheel bearings. What did problem end up being?

how can I know if I need to replace my front or rear struts?

@cecegiles4583

3 жыл бұрын

If your car is bouncy, replace the front

Was the tire shop Pep Boys?

@billypreston12

4 жыл бұрын

Rottboss Schlll - probably pomp’s tire

dobry napad, zkusim prohodit na fabce

My car! When I drive 60-70 up the wheel is shake do you know what wrong with that!!

Well Done.

I just had new tires installed and now my steering wheel shakes too. I should have gotten better tires! Maybe tire beads might help?

@shahsmerdis

4 жыл бұрын

@@MrCapi55 actually first step check tire pretty :D. I can tell you even shops put in 40 psi ... reset them to 32 no more shakes.

@nosliwttam77

4 жыл бұрын

Balance

@kenjohnson7214

4 жыл бұрын

Have a "road force" balance done on the tires

Where is you’re shop located ?

Where in Northern California is your shop located?

@DeserieDonae

4 жыл бұрын

S T Arcata California

@manuelsalvatierra2940

4 жыл бұрын

Somewhere in california Someone else already replied where

So alignment was the problem?????

I have the same problem with my gx470.

Here's my experience with a 2003 2wd Tacoma and high speed shaking. I went through the typical stuff. Two different tire shops, balancing, look for out of round, etc. I even bought two sets of tires, another set of wheels, new front struts, two alignments, etc. The cure, over a 100,000 miles ago was a BETTER MORE EXPENSIVE SET OF TIRES. As another said, you get what you pay for.

@kramnull8962

4 жыл бұрын

Were your spring clamps as loose as the ones on the passenger rear of this truck? Seems unless there is some serious flexing of the spring, that the replacement springs were thinner than the OEM springs, to have that much play in those spring clamps. Or they were supposed to be heated and pressed to fit the springs when being replaced under recall...

@2-old-Forthischet

4 жыл бұрын

@@kramnull8962 no. I have over 190,000 miles now on the original rear springs. I don't know if the newer Tacoma has a different type rear spring, but mine have that "reverse" bend look that were that way since the truck was brand new. My truck has no modifications at all. Everything is at stock specs. The only recall this truck went through was the front end which the dealer forgot/didn't to do an alignment after the work so that destroyed the front tires.

@manuelsalvatierra2940

4 жыл бұрын

What tires did you end up getting? I think Toyo are pretty solid

@shinjinakajima8043

4 жыл бұрын

Dont get d chinese crap, bridgestones are excellent tires

@2-old-Forthischet

4 жыл бұрын

@@manuelsalvatierra2940 My problem was cured two sets of tires ago. The current tires are Toyo A/T Open Country.

Where in California are you? I need a good Toyota guy.

My 2006 Corolla does it at 75+/-. Not violently though.

Thanks

If you had a bad tire in front and you rotate it to the back, you should still have the vibration but it should be felt in your seat instead of the steering wheel. Did you experience the vibration in the seat after the tire rotation?

@ToyotaMaintenance

4 жыл бұрын

No

he has sailun tires in d front, he shud have installed branded quality tires, there are lotsa high quality branded tires for trucks, like bridgestone, michelin, yokohama, toyo, hankook, dey are pricier but are of higher quality

@4:24, I was able to see moving.

Thumbs up!!!

Where this channel is located? Canada? Kosovo?

@doobielawson702

4 жыл бұрын

His shop is located in northern California.

@fastfeets2695

4 жыл бұрын

Look at the car plates It will tell you everything Northern California California,USA