Aren't the commutators physically separated? More precisely, as opposed to being connected, and neighbors physically separated? Why is there contact between two neighboring ones?
@peliqueirolopes86568 ай бұрын
Muito obrigado pelo seu vídeo. Se, entre algumas lâminas do coletor apresentar um valor de resistência muito superior às demais, qual será a causa e o que pode acontecer na sequência disso? Muito obrigado!
@trevorelgram84610 ай бұрын
Hi I checked my rotar using my multi metre with no change on metre checking everyone put back in grinder but still arking and burning can you advise
@happymann839 Жыл бұрын
Perfekt 👍👍👍👍👍👍
@johnwilson62989 ай бұрын
Using a multimeter will give error readings, as it cannot accurately test very low resistance
@pietropuleo26629 ай бұрын
Col metodo a 4 punte kelvin la misura in milliohm è accuratissima
@khinmaungtun411 Жыл бұрын
THANKS FOR YOUR SHARING SIR
@auto018ms
Жыл бұрын
Thanks for the support...👍👍👍
@MiltonRivas-te3ih8 ай бұрын
Video without talking
@irishguy200007 Жыл бұрын
What does this tell us about it? It has zero resistance once lead resistance is deducted? It's good??
@auto018ms
Жыл бұрын
Good
@irishguy200007
Жыл бұрын
Is a reading of 0.1 ohm ok ?? Or is it bad
@irishguy200007
Жыл бұрын
What would indicate a short
@auto018ms
Жыл бұрын
Due to the large section of the winding wire, the resistance is like that of a short circuit. GOOD
@irishguy200007
Жыл бұрын
So how does one know if the starter armature is bad or shorted if a good armature has such a low resistance
Пікірлер: 16
Aren't the commutators physically separated? More precisely, as opposed to being connected, and neighbors physically separated? Why is there contact between two neighboring ones?
Muito obrigado pelo seu vídeo. Se, entre algumas lâminas do coletor apresentar um valor de resistência muito superior às demais, qual será a causa e o que pode acontecer na sequência disso? Muito obrigado!
Hi I checked my rotar using my multi metre with no change on metre checking everyone put back in grinder but still arking and burning can you advise
Perfekt 👍👍👍👍👍👍
Using a multimeter will give error readings, as it cannot accurately test very low resistance
Col metodo a 4 punte kelvin la misura in milliohm è accuratissima
THANKS FOR YOUR SHARING SIR
@auto018ms
Жыл бұрын
Thanks for the support...👍👍👍
Video without talking
What does this tell us about it? It has zero resistance once lead resistance is deducted? It's good??
@auto018ms
Жыл бұрын
Good
@irishguy200007
Жыл бұрын
Is a reading of 0.1 ohm ok ?? Or is it bad
@irishguy200007
Жыл бұрын
What would indicate a short
@auto018ms
Жыл бұрын
Due to the large section of the winding wire, the resistance is like that of a short circuit. GOOD
@irishguy200007
Жыл бұрын
So how does one know if the starter armature is bad or shorted if a good armature has such a low resistance