Star Wars Prop Build

Тәжірибелік нұсқаулар және стиль

We have always wanted to create a Star Wars Prop influenced by the films; take it from concept, through design, and finally come out with our own prototype. We also wanted to build pieces that others could pick up and put into their own projects. That's what today's Star Wars Prop Build is all about!
Do you want to build your own Droid Socket? Maybe a full kit? Or even just a few parts to use in your own geeked out project? We have you covered and you will find all the parts you need in our Cargo Hold
www.thesmugglersroom.com/shop...
SUPPORT THE SHOW!!!
Enjoying our episodes? Do you want a behind the scenes look and more? Consider supporting us on Patreon and helping us keep all this geeked out shenanigans going!
/ thesmugglersroom
Make sure to Subscribe!!! goo.gl/FpnuFy
You can find us and more of our builds and content below!
www.thesmugglersroom.com/
/ thesmugglersroom
TheSmugglers...
/ smugglerroom
HUGE Thank you to Bob Smith Industries for their generosity and support of this project. You can find out all they have to offer by visiting their website or finding their product online with Amazon
bsi-inc.com/
Star Wars Reference - starwarsscreencaps.com/
Below are links to some of the tools we used to build this project, these are affiliate links that do not cost you extra money but when used they help support our channel. Thank you in advance for utilizing them!
Bob Smith Industries Adhesives
Our "Go-To" CA Glue!
Bob Smith's CA Glue
amzn.to/2mS42Qd
BSI Amazon Page
www.amazon.com/stores/Bob+Smi...
LASER CUTTER
Glowforge Laser Cutter
glowforge.us/f/SMXVOZPT
AIRBRUSH AND PAINTS
Complete Set of Vallejo Metallic Set Model Airbrush Paint
amzn.to/2kNsS2V
Alclad II Lacquer High Shine Aluminum Airbrush Paint
amzn.to/2lmmM9X
Airbrush Cleaning Station
amzn.to/2lk0NQY
Airbrush Cleaner
amzn.to/2lakGKx
Iwata-Medea Revolution Airbrush
amzn.to/2mN00Ze
ELECTRONICS TOOLS AND MATERIAL
Orange LEDs
amzn.to/2XpZxKJ
Warm White LEDs
amzn.to/2NVgABo
Micro Cutters
amzn.to/2QvApRA
Shrink Tube
amzn.to/37d0St7
Wire Strippers
amzn.to/37gZPYX
Helping Hands - Soldering tool
amzn.to/2NXGwwb
Red 20 Gauge Standard Wire
amzn.to/2OAJpCr
Black 20 Gauge Standard Wire
amzn.to/2CUcSlm
Soldering Iron Cleaner
amzn.to/2qopY7E
Soldering Iron
amzn.to/37fMXT1
OTHER TOOLS USED
1-2-3 Blocks
amzn.to/3bO0WAn
Plastic Razor Blade Scraper
amzn.to/3bKCLTD
Spring Clamps
amzn.to/2Tnzt2a
Rust-oleum primer gray
amzn.to/2zf6G9a
Rust-oleum Semi-Gloss Clear
amzn.to/3bN8uDD

Пікірлер: 244

  • @The_CAG
    @The_CAG4 жыл бұрын

    Woo hoo!! My wife ordered me the kit for Father's Day. Thanks and keep up the great work and content.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Awesome! Thank you! That is so great, and we hope you love it!!!

  • @keithjackson1180
    @keithjackson11804 жыл бұрын

    I love that the part names, locations and basic instructions are cut into the laser cut parts. Just remember: Every time you make something idiot proof, someone comes along with a better idiot.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOL, thank you Keith. We try our best!

  • @GarlandLym

    @GarlandLym

    4 жыл бұрын

    Keith Jackson I loved that too. But maybe I’m that new idiot. Lol. Because when Brian got to attaching the middle 2 blocks, I wasn’t sure where the alignment was exactly at. Even after he moved not the scene where it was now glued

  • @Mu-podcast
    @Mu-podcast4 жыл бұрын

    Like a poster below, I made it about halfway through the video before I jumped to the store and ordered the full kit. This is exactly the sort of thing I was wanting for my full scale R2 build. Thanks for the fantastic design and execution. I bet the pile of parts from iterating the design is impressive.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you so much Dan, we really appreciate your support, and so excited to see yours all finished up!!!

  • @dfcprops3849
    @dfcprops38494 жыл бұрын

    I raised my hand, partially because no one could see me at home, lol! Great video and thanks for sharing.

  • @wallyquintanilla192
    @wallyquintanilla1924 жыл бұрын

    I've always loved Star Wars but was never really geeked out about it until after I started watching The Smuggler's Room! Thanks for the great content!!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    WOW!! Thank you Wally, what a wonderful comment!

  • @olivashomemovies8910
    @olivashomemovies89104 жыл бұрын

    Thanks for letting us know about the Star Wars screencaps website!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    YES! LOVE that site . . . and I am sure i spend WAY too much time going through it! LOL

  • @perello23
    @perello234 жыл бұрын

    Congratulations! It’s fantastic!!👏👏👏👏🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌‼️‼️‼️

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you sir! I was really hoping you would like it!

  • @scottthomas6202
    @scottthomas62024 жыл бұрын

    Something you might want to consider...timer motors. Not as common as they used to be , but are great slow turning motors. The downsides are the rpm is usually fixed - from one quarter rpm to maybe sixty , and the are typically 120 volt AC , but they are durable and long lived. Just make sure it's a " continuous duty" model. They still pop up as surplus every now and then. For something like your basement build , they might have a use..

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Whoa! Thank you Scott, that is a great idea and something that i would love to try. Thank you very much for sharing that.

  • @GarlandLym

    @GarlandLym

    4 жыл бұрын

    Scott Thomas that sounds awesome

  • @scottthomas6202

    @scottthomas6202

    4 жыл бұрын

    @@TheSmugglersRoom Their main advantage is simplicity...give them 120 volts AC and they start turning ..no driver circuit or anything. Low current consumption and long life..

  • @Yodayahoo
    @Yodayahoo4 жыл бұрын

    Smugglers room you are awesome

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you . . . and YOU are awesome for watching and the support!

  • @The_CAG
    @The_CAG4 жыл бұрын

    I have to say i am totally Star Warified shocked at the awesomeness of this project. Furthermore making it into a kit for other fellow Sci Fi Geeksters to join is pretty damn sweet! Hell YES!! I am going to order because not only this a perfect project but more inspiration to create and let the imagination go from zero to lightspeed! Thank you Brian, Carissa and the rest of folks behind the scene.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you so much!!! Really really appreciate the kind words!!

  • @joshuatrujillo1888
    @joshuatrujillo18884 жыл бұрын

    Thank you #bobsmithindustries for sponsoring my favorite KZread Channel!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    and Thank you for making it happen!!!!

  • @roncasallas3411
    @roncasallas34114 жыл бұрын

    Brian my brother.awsome build!! Got some great ideas from it. Thanks you awsome geek!!

  • @MadcowGenesis
    @MadcowGenesis4 жыл бұрын

    Love this!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you Rob . . . Message headed your way sir!

  • @martendschrage
    @martendschrage4 жыл бұрын

    Not disappointed. Amazed at the layers on this project.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you. Getting that depth right seemed to be the most critical for having it look like it fits in the Universe.

  • @captdan7876
    @captdan78764 жыл бұрын

    Yay!! New video!!!happy hump day! Love the kit!!!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!! Happy to be able to share it!

  • @darlingdivadurelle
    @darlingdivadurelle4 жыл бұрын

    I am aw-struct and amazed! Wow... such incredible talent. My mouth is on the ground!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you so much! That is such a kind thing to say. So glad you liked it!

  • @thomasbunce4342
    @thomasbunce43424 жыл бұрын

    I had taken tons of screenshots over the past 6 months from most of the shows to make one of these and thankfully you beat me to it. Just ordered the kit!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    WOW! Thank you! Really hope you like it. We will get it out to you as soon as we can!

  • @joejojo4751
    @joejojo47514 жыл бұрын

    Great stuff! Can’t wait to see that interface spinning on its own!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you . . . ME TOO!

  • @sketchyguynv

    @sketchyguynv

    4 жыл бұрын

    I agree!!!

  • @legoman-we2zy
    @legoman-we2zy4 жыл бұрын

    The ability to buy droid socket parts is totally worth the wait. Thank you.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you very much! Appreciate you waiting!

  • @ThatGeekyMaker
    @ThatGeekyMaker4 жыл бұрын

    I raised my hand, because I am that much of a geek!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    YES!!!!!!!! LOVE IT!!!!

  • @Peeper1111
    @Peeper11114 жыл бұрын

    You're videos are awesome. They inspire me to do Star Wars projects.

  • @sawc.ma.bals.

    @sawc.ma.bals.

    4 жыл бұрын

    Congrats you are first I think

  • @Peeper1111

    @Peeper1111

    4 жыл бұрын

    @@sawc.ma.bals. I was the first comment, but 3rd view.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! It makes us so happy to hear!

  • @DarrellAyer
    @DarrellAyer4 жыл бұрын

    I love this build. If you want to get a more even illumination in the interior of the light boxes hit the interior with a super white or even white with a slight spray of silver. It will massively reduce or eliminate the light fall off as you get away from the diodes themselves. Keep up these great projects.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! And you are 100% correct, That is the one thing I feel like i missed. The blue tile doesn't even glow as a result, so I am certainly going to do that again.

  • @FamineStudios

    @FamineStudios

    4 жыл бұрын

    I've also used foil tape! Great video and great ideas here in the comment section.

  • @RebelBaseBuilds
    @RebelBaseBuilds4 жыл бұрын

    Hey Brian, as you know been waiting for this one. It's fab and movie ready! Love the video composition and as always I find myself inspired I think I'll have a go at making a custom kit for the Rebel Base Build at some point too. I'm looking forward to our Collab!!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you good sir! Really appreciate the kind words. Looking forward to it as well!

  • @philipgilbert3772

    @philipgilbert3772

    4 жыл бұрын

    @@TheSmugglersRoom Agreed really good video Brian

  • @Iskelderon
    @Iskelderon4 жыл бұрын

    Man, I just love how you've taken to selling greebles on your website for others to use, the same way Randy Cooper offers those curated sets for starship model scratchbuilders! Hope they sell well enough to make the effort worth it, since it's a great service to the Star Wars community.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!!! We love to be able to help others with this kind of stuff. I’ll tell you though, even if our work just inspires others to try building stuff we are good with that too! Thanks for watching!

  • @quixoticjedi942
    @quixoticjedi9424 жыл бұрын

    Awesome build, I love how you used those 123 blocks to square up and align those parts, that was brilliant!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! Those 1-2-3 blocks come in hand for EVERYTHING! Love them. Thank goodness for Bill Doran with punished props for teaching me that move!

  • @jeffkemperman5506
    @jeffkemperman55064 жыл бұрын

    Yep, I made it through about half the video before I was on your website purchasing the kit! Thank you so much for making these available!! ...and thank you too for introducing me to Bob Smith Industries! I have bought some of their products based on your recommendation on previous builds and am super impressed! Thank you as always for everything you guys do!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you Jeff! We really appreciate it and can’t wait to see how yours turns out!

  • @FigmentsMade
    @FigmentsMade4 жыл бұрын

    That is excellent! And it's so cool that you're offering the kit!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Glad you like it! Thank you!

  • @749Giovanni
    @749Giovanni4 жыл бұрын

    Once again Brian you amaze me I love your Creativity and your wit.. 100% fantastic

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!

  • @andrewwarman954
    @andrewwarman9544 жыл бұрын

    I'm sure that I was not the only one to actually raise their hand with you. A great video as always. You have definitely inspired me to do several projects of my own, especially since almost everyone has been stuck at home without much to do while waiting out this year's virus. I would have lost my mind already if not for these art projects.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    I’m so glad I wasn’t alone with my hand in the air! Happy to hear you have had projects to work on, it has really helped us get through this as well.

  • @GarlandLym
    @GarlandLym4 жыл бұрын

    Thanks Brian for the great project and a also the ability to try it out ourselves. Just placed the order a second ago. Hoping I got to the front of the line before everyone floods in and buys one.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you very much! We really appreciate it, and cant' wait to see how yours turns out!

  • @atticus-rex
    @atticus-rex3 жыл бұрын

    I would buy that. I would buy a lot of what you make. So would many people here. Get the hint? Wall art? Tabletops? Displays? Come on man, sell us some stuff. Just like one thing every few months. Produce copies of something you know will sell. I hope you've already been thinking about it. I don't know how you couldn't by now, you both are smart cookies. Anyway, I'm a Patreon now so I'm respectfully putting in a request....that you must do it. LOL! Seriously love this channel, it's going in the background while I work on my projects. I just love the spirit of your work and videos and I let it bleed over into mine. By the way, I'm getting closer to finishing my fan film, many of the props were inspired by your builds. Peace.

  • @JoelMaisonet
    @JoelMaisonet4 жыл бұрын

    Ah!!! It’s here can’t wait watch this!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOL! Thank you!!!!

  • @JoelMaisonet
    @JoelMaisonet4 жыл бұрын

    This is a game changer!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! We are so excited about it!

  • @DarkDioStudio
    @DarkDioStudio4 жыл бұрын

    You're like ASMR.......SO SOOOOOTHING! Thank you for all that you do to keep us entertained my friend. Lots of love ❤️

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you so very much! We can't thank you enough for the kind words!

  • @sketchyguynv
    @sketchyguynv4 жыл бұрын

    I want to build this with my son!!!! So awesome!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    That would be a great project!

  • @Quin-te-n
    @Quin-te-n4 жыл бұрын

    Love your content, the inspiration is blowing out of my head so please keep up the good work ;)

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you much! So happy to hear that!

  • @djsloanau
    @djsloanau4 жыл бұрын

    Great looking panel. Pity you couldn't have gotten the stepper motors. I went with HDD motor for mine using TIP 122 darlington pair transistors, driven by an arduino. By modifying the timings I was able to get it to flick forward and backwards randomly. It isn't finished yet, but I'll post it when it is. Looking forward to more on the room build and completion of DD3. Great work.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    OH!!! Please do. I am struggling with exactly how this is going to work. Would love any advice you have.

  • @davidsloan9879

    @davidsloan9879

    4 жыл бұрын

    I'll knock together a circuit diag. For you and hmm, how can I send you it and the sketch?

  • @CGRTist
    @CGRTist4 жыл бұрын

    This is Fantastic! I had no idea about Screencaps.com! Thanks!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Yeah buddy! Best spot on the internet for reference (be careful though . . . you may end up re-doing your whole room! :)

  • @DarkDioStudio

    @DarkDioStudio

    4 жыл бұрын

    I second that. Great content for diorama making

  • @blizatrex
    @blizatrex4 жыл бұрын

    Looks awesome. I can see why this took a bit longer. Well done.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you Wayne! Yeah, it was a challenge for sure. So glad you liked it!

  • @silverbackandson3514
    @silverbackandson35144 жыл бұрын

    This is awesome! Thanks so much for doing this and inspiring other builders! As soon as I saw it I said, "stepper motor" bummed to hear it won't be included but I have every confidence you'll figure it out once they arrive. I'm looking forward to ordering and your next build!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you Michael! We were super bummed out too. That stepper motor was suggested to us by another viewer and it was a great idea. We will post something soon on how we do that . . . once i figure it out! LOL

  • @roncasallas3411
    @roncasallas34113 жыл бұрын

    Awsome build brother... this is the way!!

  • @thedarkknight803able
    @thedarkknight803able4 жыл бұрын

    That was Awesome! Video. 💥😎👍🏿

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    So glad you enjoyed it!

  • @thedarkknight803able

    @thedarkknight803able

    4 жыл бұрын

    You are the best of the best!😁👍🏿

  • @Bryan-fn3yq
    @Bryan-fn3yq4 жыл бұрын

    This is great! Thanks for sharing this.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Absolutely, and thank you for watching!

  • @silviofoj
    @silviofoj4 жыл бұрын

    If I could, I would put this kind of panel in every wall of my apartment. On the ceiling. In the microwave's panel. On the wardrobe's door. Greeblies everywhere!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOL!! That is AWESOME

  • @Frimsure
    @Frimsure3 жыл бұрын

    i cant wait for this to come back into stock on your website. i so want to get this to go with my full size astromechs

  • @mattkendell1344
    @mattkendell13444 жыл бұрын

    Great build. You always inspire me. Can't wait to see the room.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! Room build is coming really soon. We had delays of all kinds with shipping, but it's coming we promise!

  • @kyr_taap
    @kyr_taap4 жыл бұрын

    I already knew that this project was going to be awesome by looking at the teaser image Have to build one for myself in the future

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!

  • @deannaatkinson3004
    @deannaatkinson30044 жыл бұрын

    This is an awesome build Brian. I need to see if I have the funds to purchase this full kit. I already have the perfect spot on the wall for it. Keep on keeping on.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!! So glad you enjoyed it!

  • @MCECentral
    @MCECentral4 жыл бұрын

    Man I love your work. I’m doing my best to make my Star Wars room look this good, but damn you take it to another level.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    That is so kind of you to say. Really appreciate it. So glad to hear you are building a room. Would love to see what you are doing!

  • @JvdBos
    @JvdBos4 жыл бұрын

    Smart going with the captured nut, there! Y'see, this is why I like watching crafters like you; what I see might not be directly applicable to what I'm building, but it's cool for the ideas alone :-D

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you very much! We appreciate the kind words!

  • @idiotluggage
    @idiotluggage4 жыл бұрын

    When you add the stepper motor you should add an RF transmitter & receiver. So you can have your droid activate the motor when it gets close.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Good idea! We were thinking Bluetooth or motion sensor as well!

  • @idiotluggage

    @idiotluggage

    4 жыл бұрын

    @@TheSmugglersRoom You should be able to put the chop in the end of Lefty's arm so it can get close to the panel and activate the motor.

  • @knskumo
    @knskumo4 жыл бұрын

    Cool. Love it.

  • @Tigrillo
    @Tigrillo4 жыл бұрын

    beautiful piece of art....Greetings from Costa Rica

  • @jediknightjairinaiki560
    @jediknightjairinaiki5604 жыл бұрын

    I've been using Bob Smith glue and activator for years. Great minds think alike. 👍

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Awesome! It's such great stuff, we are so thankful for their support. Thank you for watching!

  • @ShelbyGT2112
    @ShelbyGT21124 жыл бұрын

    I see your Patreon list is growing :) Congrats!! I may have done this in reverse order but I purchased the kit THEN days later I finally got to watch this video. :P I can't wait for the kit to arrive now!! Thank you for making these "How to" videos and showing even the simplest, smallest steps. For someone like me they are very helpful.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    You sir are amazing! Thank you so much for all the support. We are so thankful! Cant' wait to see how your kit turns out. It's going to be pure joy to see it built and in your collection!

  • @legomegacy
    @legomegacy4 жыл бұрын

    yes i absolutley love this!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    So glad to hear it! Thank you!

  • @Goldensecret001
    @Goldensecret0014 жыл бұрын

    cant wait for your droid to be able to access one of these ports! and it actually do somthing lol

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    ME TOO!!!!!

  • @craiggehlert
    @craiggehlert4 жыл бұрын

    such a cool build! cant wait to see it move.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    So glad you enjoyed it!!

  • @fullentony
    @fullentony4 жыл бұрын

    Just placed my order for the kit! You guys are awesome! Thanks so much for the inspiration. Can't wait to put this together and add it to my Star Wars office build!! I may even have to add the motor and get it moving with my adruino board. Keep up the great work guys!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    THANK YOU! Very much appreciate it. Can't wait to see what you do with it!

  • @GrooveBuilders
    @GrooveBuilders4 жыл бұрын

    Great as always. I can't wait to redesign my set with some of your ideas.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!

  • @darrinplank
    @darrinplank4 жыл бұрын

    Awesome build. Might just have to get the kit and try it

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Go for it! LOL. Thank you very much!

  • @owentomlinson8045
    @owentomlinson80454 жыл бұрын

    This was definitely worth the wait to see once I get settled into my house I’m definitely getting one of these!!! You guys are awesome!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you, so glad it was worth waiting for!

  • @kelleyplumer8723
    @kelleyplumer87234 жыл бұрын

    Really cool build! This is something i.would definitely buy for $65. Or $90 if it was ready to assemble and painted.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! It is up on our website if you want to have a look at the kit.

  • @sharliecarma4044
    @sharliecarma40444 жыл бұрын

    Straight outta Coruscant! I love this build, definitely one of my favorite SW Tech pieces of all time. Thanks again for the awesome inspiration to build something... outta nothing.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you so much! Very glad you enjoyed it!

  • @ivangonzales5667
    @ivangonzales56674 жыл бұрын

    Awesome project, looks really great 👏👏

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you very much!

  • @hunterbatten4011
    @hunterbatten40114 жыл бұрын

    thats really clean dude, awesome job!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!!!

  • @Faiq_h
    @Faiq_h4 жыл бұрын

    You are amazing!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you!

  • @dandugan3456
    @dandugan34564 жыл бұрын

    Would love to see your take on a sabaac table

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    My friend . . . you will see that sooner than you think ;)

  • @RainMakeR_Workshop
    @RainMakeR_Workshop4 жыл бұрын

    A Star Wars fanfilm so needs to bring you on board at the set designer and prop master.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOL!!! Thank you, that would be an absolute blast!

  • @GarlandLym

    @GarlandLym

    4 жыл бұрын

    krulty or even just a KZread crossed over episode with punished props, I like to make things, Adam savage or the rebel base builder

  • @midatlantictools
    @midatlantictools4 жыл бұрын

    It would be nice if Bob Smith Industries had a code so they know the info came from you..! Great video again..!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! If you use the link above for Amazon they will know. Thanks again!

  • @andybogart2503
    @andybogart25034 жыл бұрын

    You use a glowforge, right? Love this project and your positive vibe Brian!! Thanks for what you give us :)

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you for the kind words! Yes, our laser is a Glowforge.

  • @SpencerMoon-rb9nl
    @SpencerMoon-rb9nl4 жыл бұрын

    Cool

  • @HarleyPebley
    @HarleyPebley4 жыл бұрын

    Really cool build! Saw your email about it earlier today and was surprised there wasn't a build video associated with it. Guess it went out before this was posted. Cheers.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thanks Harley, I thought we had one attached to the email? But glad you jumped on to watch either way!

  • @HarleyPebley

    @HarleyPebley

    4 жыл бұрын

    @@TheSmugglersRoom Oh, I see. I went back and looked at the email again. The image of the finished product towards the bottom was a link to the video. I didn't recognize it as a link. Just thought it was an image.

  • @scottmemberg
    @scottmemberg4 жыл бұрын

    Brian, Great job once again. I wish I could afford a 3d printer. I am sure that makes things SO much easier! I can't wait to see what comes next!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! 3D printers, lasers, CNC . . . all of that makes some things easier, but simple tools and paint are perfectly great too! We are going to upload some more direct "hands on" stuff really soon!

  • @scottmemberg

    @scottmemberg

    4 жыл бұрын

    @@TheSmugglersRoom what kind of 3d printer are you using? Im sure we would love to see the Toys you have in your shop!

  • @magicwrestler86
    @magicwrestler864 жыл бұрын

    Great video, as always. Would you possibly make or share a video where you do a demo of the designing process? I love the DIY of the actual builds, but I’d love to learn more as to how you use Adobe and the other programs for the xcarve or fusion, to create these force masterpieces

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you for sharing this suggestion. We would love to do that. Consider it on the list and we'll do that very very soon!

  • @alexb2889
    @alexb28894 жыл бұрын

    Sup guys great vid as usual clicked as soon as I saw

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank You Alex!!!!

  • @ErnestBegley-nl6sb
    @ErnestBegley-nl6sbАй бұрын

    I want one! Please

  • @deannaatkinson3004
    @deannaatkinson30044 жыл бұрын

    Hey Brian. Any chance of a Glowforge review video in the near future? I would love to see it in use and your feedback. Now that you have like a thousand orders for this Droid Socket kit, it'd be an ideal time to show it in action.

  • @RevenantManor
    @RevenantManor4 жыл бұрын

    Great channel, great video, and great prop! I have a HIC build underway, and am looking for a way to liven up the wall where he will ultimately reside....guess which kit I just bought as a complement to Han's future home? (go ahead, guess!)

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOL!!! Awesome! Thank you! Best of luck with your HIC, that was one of our favorite builds of all time!

  • @anthonysalinas6639
    @anthonysalinas66394 жыл бұрын

    So kool I need a laser cutter 😬

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Lol, they are more fun than they should be 😳

  • @geoffersongeofferies477
    @geoffersongeofferies4774 жыл бұрын

    Top notch! Another incredible project. May be my favourite yet. Keep it up.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Awesome, thank you! So glad to hear this!

  • @seanmarsh6158
    @seanmarsh61584 жыл бұрын

    Great build! Looking forward to getting the kit. Question, when you do get a motor to have it spin on its own will that be something that fits into the original kit? I'm just wondering if it'll be a prop that I can upgrade later down the line. Thanks! Keep making great content and inspiring us all!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you for purchasing Sean. I’ll be 100% honest, since we don’t yet have the electronics in hand I can’t say 100% how it will work. But I’m planning to do my best to make it work with the parts we have made and not have major changes. We will be sure to send anyone that purchase a kit instructions on how to make it work once we get to that point.

  • @seanmarsh6158

    @seanmarsh6158

    4 жыл бұрын

    @@TheSmugglersRoom awesome thanks! Either way it'll look great in the room and looking forward to building it 😁

  • @GarlandLym

    @GarlandLym

    4 жыл бұрын

    The Smugglers Room Thank you Brian

  • @pkextra2834
    @pkextra28344 жыл бұрын

    You should try to do a few of those imperial pen things, the ones they keep in their pocket things. I don’t know what it’s called, but they get some usage in Rebels

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOVE that idea!!!

  • @DavidHinesMusic
    @DavidHinesMusic4 жыл бұрын

    I feel like Ralphie," a crummy commercial?", lol.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Oh No David, sorry! The whole episode or our sponsor insert?

  • @DavidHinesMusic

    @DavidHinesMusic

    4 жыл бұрын

    @@TheSmugglersRoom I love the channel. It just seemed like it was a commercial to sale your products.

  • @jasoncarbone5553
    @jasoncarbone55534 жыл бұрын

    Did you use the glowforge to cut your acrylics? Also will it cut EVA foam? Thanks and keep the killer content coming!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Hey there, we did use the Glowforge for this project. I’ve used it for EVA foam with much success. You have to be sure to verify the materials the foam is made of so it doesn’t harm the laser, but there are helpful notes in the Glowforge community posts on that.

  • @GunnerAl9
    @GunnerAl9 Жыл бұрын

    Where do the wires lead to at the end when you had like ten of them coming out of the hole on the top or bottom? What voltage were you using. If it was low, why not keep the wires inside the box and create a switch using one of the buttons you added? You never mentioned where the wires were heading to. This item is so cool. When it's back in stock I think I'll order one for my R2D2 room.

  • @grahamjones7814
    @grahamjones78142 жыл бұрын

    Idea, magnet read switches by the disks, so when they spin they change the light pattern

  • @TheSmugglersRoom

    @TheSmugglersRoom

    2 жыл бұрын

    Great Idea Graham!

  • @katsumiskytower8714
    @katsumiskytower87144 жыл бұрын

    this is so clean and professional looking! love it!!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! We can't wait to show that to you, you are going to LOVE it!!!

  • @CourtSideVlogs
    @CourtSideVlogs4 жыл бұрын

    You inspire me to do so many amazing project but I have one question. Where do you get your foam from?

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! I buy 99% of my foam from SKS Props HD Foam, and then the super thick stuff from TNT Cosplay. HD Foam @sksprops : www.sksprops.com/hdfoam TNT Cosplay: tntcosplaysupply.com/

  • @CourtSideVlogs

    @CourtSideVlogs

    4 жыл бұрын

    The Smugglers Room thank you that will help me out so much.

  • @jediknightjairinaiki560
    @jediknightjairinaiki5604 жыл бұрын

    Will it be possible to add the electronics needed to spin the droid socket gears / wheels after the fact or does it need to be done prior to completion of the box.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    We are thinking that you can do it with the build as is . . . but I'll be honest, until I try it out I don't know 100% how it will all work out.

  • @jediknightjairinaiki560

    @jediknightjairinaiki560

    4 жыл бұрын

    @@TheSmugglersRoom Very good, sir. I'll wait to place an order until said details are fleshed out. Any thoughts how it'll be a activated? A button? A rocker switch? Motion activated? A pressure plate triggered by the insertion of a droid's scomp link / computer interface arm / computer coupler.

  • @mandalorianihavespoke7453
    @mandalorianihavespoke74534 жыл бұрын

    Did you get a chance to finish your smugglers Room I love the see a whole video and a walk through of the whole thing. That would be awesome I wanna feel like I'm in the millennium Falcon 😁

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    It yet, still working on it. We hope to have it done by next May!

  • @mandalorianihavespoke7453

    @mandalorianihavespoke7453

    4 жыл бұрын

    Man you don't do anything small do you. That's a long time. I will try to be patient 🤣🤣

  • @twistydogcreations683
    @twistydogcreations6834 жыл бұрын

    Looks fantastic! I'm always inspired by your videos. I guess I should get back to work on my Mandalorian mouse droid instead of watching KZread. LMAO. Keep up the great work!

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    LOL!! Thank you so much! We hope it gets you back to work 😂😂😂

  • @twistydogcreations683

    @twistydogcreations683

    4 жыл бұрын

    @@TheSmugglersRoom The biggest struggle is to film it as I build. Still not used to that part and I'm killing myself trying to edit it all. Then I'm burnt out for a week and don't want to touch it. LOL I love your editing style and confidence in front of the camera. Half my brain watches the prop build and half watches the editing 'oohh nice close up.." :D

  • @alfreddumas4611
    @alfreddumas46114 жыл бұрын

    Great build... as for motorizing the interface pieces are you planning to add gear teeth to the outer diameters of each layer's ''disk'' and with small motors and an arduino or similar small pc to randomly move each layer with a small proximity switch triggered when you motion close to the interface?😎

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! To be honest we have not entirely figured out how all of it will move. Each "wheel" is isolated, but the real trick is hiding any of the mechanical aspects of the prop so you don't see the gears or motor connections. Should be fun to figure it out!

  • @alfreddumas4611

    @alfreddumas4611

    4 жыл бұрын

    @@TheSmugglersRoom I am thinking to make simpler only a few layers need to move so use thin clear material at a diameter large enough to be hidden inside to move those few layers... but i am but a mere dreamer...you are the geek that makes it happen!😁

  • @braedenfree1180
    @braedenfree11804 жыл бұрын

    Interesting

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Interesting good or . . . ? 😉

  • @braedenfree1180

    @braedenfree1180

    4 жыл бұрын

    @@TheSmugglersRoom Yes. Good. I always love your stuff my guy 👍

  • @Xavier_BE
    @Xavier_BE3 ай бұрын

    is it possible to download the layouts somewhere to laser cut it myself ? that would be great !

  • @TheSmugglersRoom

    @TheSmugglersRoom

    3 ай бұрын

    We do not currently have the files for sale, but we are considering it.

  • @cyberpunk4622
    @cyberpunk46224 жыл бұрын

    Will you have completely assembled versions up on the site or will they be all DYI? Just inquiring for people who maybe want to buy as a gift.

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Right now we are just planning on the kits to be assembled. Thank you!

  • @lipomicanbricks7431
    @lipomicanbricks74314 жыл бұрын

    This is amazing are you guys going to do a Hoth glowing console from the empire strikes back 18:28

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Thank you! I sure hope we get to a project like that soon!

  • @GarlandLym
    @GarlandLym4 жыл бұрын

    So, today, I went to your video notes to add all the items you use to make this. So that when my kit comes in, I am ready to go. Filled the Amazon cart....financially painful, but still excited. ThenI clicked the laser cutter, holy smokes! It ranges from $2500 to $6000... and that’s if you were referred. If not, the price is 3x So, let me remind #thesmugglersroom how happy I am that I can get kits. As there is no way I can afford the laser cutter. But that’s not to say I won’t keep revisiting the page to smash my nose against the virtual glass as I window shop. Brian, what version of the 3 do you have?

  • @TheSmugglersRoom

    @TheSmugglersRoom

    4 жыл бұрын

    Hi Garland!!! Thank you so much for purchasing a kit. So excited to see how yours turns out. Yeah . . . the laser cutter isn't a cheap purchase. We saved for almost 4 years to get the cutter. Even then, it was soooooo hard to purchase! YIKES. it's wonderful, but took a long time to get it. We purchased the Pro version. Thanks again for picking up the kit!

  • @xxxxzorroxxxx
    @xxxxzorroxxxx3 жыл бұрын

    Please update when you put motor s in

  • @jediknightjairinaiki560
    @jediknightjairinaiki5603 жыл бұрын

    What size LEDs do you use?

  • @TheSmugglersRoom

    @TheSmugglersRoom

    3 жыл бұрын

    We have been using a lot of 5mm LEDs. Here is a link www.amazon.com/gp/product/B07PXYYTY4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Келесі