I found a quilt I loved that required a 6 pt star but did not give directions for it. You were the first person I thought of that might have a tool for this (I own about 6 of your "tools") so I went to Amazon to order it. Well, it was going to take almost 6 days to receive it (so unlike Amazon). I ordered it anyway. In the mean time I was anxious to start the quilt so I went to KZread for directions - of which there were quite a few. Two of them required me to pay for their pattern and instructions - which I did. Tried them but it was quite tedious and I did not like the results. The last one I tried I had to get a 60 degree tool (which Amazon delivered in a day)! Not too bad but still did not like the finished product. At last - TODAY I rec'd my 60 degree power tool from you. - Oh I should have just waited - I somehow knew you would have the answer!. Am half way through my first 6 pt star and if I could, I would love to give you a big hug and kiss. Thanks for being there and developing these wonderful quilting tools. Sometimes when I read quilting directions, their methods are soooo long and tedious (not to mention extremely time- consuming) - Deb Tucker to the rescue!!! Thanks again my sweetheart, can't wait to really get going on my quilt (with the amazing 6 pointed stars).

What an outstanding instructional video. Thank you, Deb Tucker. This is why we buy your rulers. Bought the Star 360 at the Wisconsin quilt show yesterday and can’t wait to use it!

@DebTuckersStudio180Design

10 ай бұрын

Thank you, I am so glad to hear you picked up the tool at the show. It is one of the best times to do that.

You are wonderfully understandable and concise. Thank you for getting right to the point and sharing in a way that is simple to understand!!! So glad I found you!

You’re a wonderful teacher.

Oh my goodness, overwhelmed yet? Deb you are an amazing teacher, how do you come up with all this?? I am amazed! I've had my ruler a little while but I'm actually going to try it today!! Wish me luck!!

@DebTuckersStudio180Design

3 жыл бұрын

You will do great!

Wow! Deb makes it sound so easy! I know I would have to go slowly, but FANTASTIC results can be achieved!

@johnsonlamore2890

3 жыл бұрын

Hello how are you doing my friend

My head is swimming, but you’re an excellent, thorough instructor. Very much appreciated.

@DebTuckersStudio180Design

3 жыл бұрын

See, this is why it's great to have a video demo, you can watch it as many times as you need until it makes sense 😁

Oh boy this is going to way to much fun to play with🎉I can hardly wait to try it out. I bought the ruler and have been waiting patiently for this video before I tackled a project. Connie🇨🇦

you never disappoint! thank you again🤗

Always avoided those triangles! I think I need another tool! LOL! Thank you, that was really interesting. xxx

@johnsonlamore2890

3 жыл бұрын

Hi Kerry

Thank you for all your informative videos. You explain everything so well it’s a pleasure to learn the reasons why as well as the reasons how to achieve great blocks.

@johnsonlamore2890

3 жыл бұрын

Hi

Wow. That was a lot of great information in one video. Thank you.

thanks so much you really are a good teacher , and yes the stress of making this block all gone I know i can do it now !

Deb, U r just brilliant! Though the video was long n was full of info, I kept feeling that it should never end. I stay in India n we do not get these (n such) rulers over here. But shall make one for myself. Thank u so much for taking efforts to make such videos for us.

Wow. Wow. Wow. Just wow!!!! Excellent production and presentation.

@johnsonlamore2890

3 жыл бұрын

Hello Nancy

Love your tutorials.

@johnsonlamore2890

3 жыл бұрын

Hello Laurie

You are awesome teacher. Thanks for explaining everything step by step, I must buy this ruler another toy to my collection xoxo 🇦🇺😍

Wow! this takes much stress out of triangles. Thanks.

Amazing tutorial and fabulous video thanks for sharing

Stunning Deb! Will get it ASAP!!! 😍😍😍😍

@DebTuckersStudio180Design

3 жыл бұрын

Yay! Thank you!

This is an excellent lesson and tool. Thank you.

YOU ARE AWESOME. THANK YOU FOR DETAILED TUTORIAL.

I love love your way of teaching 😊and actually I loved your creation of making those tools 😉i almost have your tools..I loved those all.i cant believe that i making those difficult piecing,but because of your tools and your instruction,,I’ll make it easy and beautiful..I’ll post that one of my facebook page and my friends tell it was amazing...thank you very very much..I loved it 😉😉😉

@johnsonlamore2890

3 жыл бұрын

Hi how are you

So much information! My head’s spinning. I’ll keep this video handy as well and the instructions! I do have a question. My cutting mat is a rather med dark green and I find it really hard to see the fabric and the edge of the tool/ruler. I notice that your mat is quite a bit lighter. Is it available commercially? If so, please let me know where I can get it. If not, please start selling your mats too!

@doreenmacgillivray3419

3 жыл бұрын

I purchased a Quilters Select double sided cutting mat. It is dark gray on one side and light gray on the other.

Lovely ruler! Tried to make free pattern on back of sheet, managed the desgn, but the instructions for the companion triangle cp

@johnsonlamore2890

3 жыл бұрын

Hi Linda

Wow, you must have a really high IQ! Ty so much for this ruler and precise instructions!

Perfecto me encantó

Thanks

Just love it! Now I am going to have to "Tuckerize" some of the modern patterns that I love for 60 degree triangles and diamonds on Krista Moser's website, Check out her patterns and youtube videos and hopefully you can make some future videos on how to make some oversized pieced 60 degree triangles and diamonds with the Star 60 tool for more precision piecing.

@johnsonlamore2890

3 жыл бұрын

Hello Jane

Cordial saludo. Desde Medellín Colombia. Me encanta su canal, pero usted tendría la posibilidad de que los subtitulos fueran traducidos al español?. Dios le bendiga

Are you saying that these instruction sheets come with the ruler? Or, are the sheets/instructions something different?

@DebTuckersStudio180Design

Жыл бұрын

A set of instructions comes with the tool. And then we have technique sheets available to order that do other techniques. You can view all the products that go with the Star 60 tool here: deb-tuckers-studio-180-design.myshopify.com/collections/star-60 Also if you click on the STar 60 tool and look over the page there is a place where you can click(says Colplete step by step illustrated instructions) to look at a PDF of the instructions that come with the tool before you purchase.

I hate computers! To continue, the instructions for the included pattern worked fine until the portion on companion triangles. Couldn't make any sense of them. First attempt a total failure. Asked for help from an experienced quilter, she threw up her hands in frustration, so I guess I'm not as stupid as I feel. Any helpful hints? Thanks!

@DebTuckersStudio180Design

3 жыл бұрын

Hi Linda! Let me see if I can help you out. So the size of the companion triangles should be the same size as the Star 60 units that you made. For example if you made 4" Star 60 units then follow the row for 4" Finished Star 60 units over to the column labeled Companion Triangles (either Precision or Oversized, your choice). Those companion triangles will be the size you need to fit to the hexagons to make them large triangles. Please email customer service if you would like more assistance: Studio180DesignCustomerService@gmail.com

Hello from San Jose CA 😊

interesting

It would be nice if the camera focus on table while you are talking explaining about the block. When you’re talking and doing you block camera is only focused on your face and I missed out what you were doing with block

@DebTuckersStudio180Design

3 жыл бұрын

Aw, I'm sorry about that! I'll try to do better at showing the block at detail steps in the future.

Hi Deb ... I sent you an email . I was trying to purchase your Star 60 . The order plus Canadian shipping & handling was going to cost $65.00 ... No Can Do ! Do you have a Canadian distributor ?

@johnsonlamore2890

3 жыл бұрын

Hello how are you

@suzanneritchie7048

3 жыл бұрын

@@johnsonlamore2890 Yes , hello !

@johnsonlamore2890

3 жыл бұрын

@@suzanneritchie7048 hope you are safe from the virus?

@suzanneritchie7048

3 жыл бұрын

@@johnsonlamore2890 Yes , I'm very careful ... in a small bubble with my 86 y.o. Mom

@johnsonlamore2890

3 жыл бұрын

@@suzanneritchie7048 I’m glad that you are safe and your mom too . Where are you texting from ?

👋👍👍👍👍👍

Nice idea, but the creative grids ruler by Krista Mosa beat you to it, and its very easy to use to.

@SparkyJoon

2 жыл бұрын

The CG Ruler does not allow for over size cutting and precision trimming. Each method works, different strokes for different folks.