I wanna see in the future, the controler of the standing desk in the desk 🔥🔥

@camshand

4 ай бұрын

Yeah man it's happening! I do need to figure out how I can recreate the buttons to not be black but also keep the 7 segment display for height readout and settings. Might have to solder onto the existing circuit board and re-route to new parts, or see if I can maybe make new buttons for the controller that are white. (lol just thought I can even paint or make stickers for over them). heck literally writing this to you I've thought of a few new ways, thanks! haha

@tour2778

2 ай бұрын

​@@camshandYou did it!!

you're way to underated

@EliAnderson-gm7uy

2 ай бұрын

Agreed

genuinely this is one of the most interesting series ever and ive watched a bunch of your vids for this series and am always ready to watch more please dont stop

@camshand

4 ай бұрын

Appreciate your support 😁 I could never imagine the level of interest in this build, it was a far off idea until I thought "why not just try and make it". Stoked that it's working out so far. Currently editing a vid on the next piece of tech that will be added into the desk.

Your positivity is inspiring

@camshand

4 ай бұрын

man it's hard to not be excited about my dream custom desk build 🤩

Underrated af, this stuff is crazy

@camshand

4 ай бұрын

A long as you keep watching then KZread will keep showing to more people, appreciate your support man 🤙

Mate your videos are top notch. I've been wanting to do the same thing to my desk - so this review is such perfect timing. I've put in a 3camels alert for these legs.

@camshand

4 ай бұрын

I put a crazy amount of time into making the vids so appreciate your acknowledgment 🤩 yeah adding standing desk legs is such a great easy upgrade (unless you have a custom V-Slot frame then it's not easy haha). 3camels is great, hopefully you get that notification soon!

@faaarmer

3 ай бұрын

It definitely shows mate@@camshand

super cool build man! keep it going !

Thank you for the tip on the lower/higher limit, have this desk for almost 4 years and just discovered this thing lol, u the best ❤

@camshand

20 күн бұрын

Happy to help! It really rams into my drawers otherwise haha 😆

Absolutely loving this desk series, super inspiring for doing custom stuff for my desk!

@camshand

4 ай бұрын

We all start somewhere man! a vesa clamp on monitor arm, some speakers stands or a headphone hook can spice up your existing tech really easily. start with the small custom mods that bring big value 🤙

you are the only youtuber i look forward to watching. keep up the good work dude!😀🔥

@camshand

4 ай бұрын

So happy to hear your excitement for my videos, I have been editing a new one about the next piece of tech to go into the desk. That should go live this weekend 🤙

Love your videos

I actually got hyped when I saw you had new vid this is my fav youtube build at the moment

@camshand

4 ай бұрын

Dude, stoked to hear you're so excited to see each part Chris! I'm currently editing a vid on the next piece of tech that's going into the desk 🤙

keep up the good work.

I really enjoy these builds. Was also just looking at a standing desk too. Might just get the legs!

@camshand

4 ай бұрын

Yeah so much cheaper to find legs that have the features you need and then buy a solid wood kitchen benchtop.

I’m really enjoying this project! Currently looking for a new place and your videos are such an inspiration to build my own in the new home 😊

@camshand

4 ай бұрын

glad to hear you're enjoying it! Take as many ideas as you need, I do have previous setup tour videos. and also recommend checking out my wall mounted TV setup, also shown in my latest Soundbar VS Hometheatre video. It's the small details that really make tech in your home flow

Nice vid mate

nice keep it up!

4:50 "I don't think i've ever walked up to a bench up this high." - You're clearly not smoking the same stuff i am...

i need a pc thank you for your content

Cool Video

Good ❤

I did wonder if that was going to be an option for your desk in the future. Nice work man,

@camshand

4 ай бұрын

Yeah man, making those metal supports in the frame extend beyond the drawers was a subtle change that really unlocked the compatibility. Now to figure out how to mount the controls into the desk without the black buttons but keeping the screen.

@SenZubEanS

4 ай бұрын

Can you just solder on another display and get some this that fits the aesthetic better?

I want this desk but in black

I plan on buying the legs and a desk top (aussie so bunnings probably) how would I find the centre of the desk top?

How's the wobble holding up since?

I am taller at 6'2 and when i first setup my standing desk i needed it at full height which is 115 and i didnt really think about my pole monitor arm which promptly went through the ceiling in the most perfect of circular punch-out's.

@camshand

4 ай бұрын

hahhaa ohhh no! how fricking tall is your monitor arm? have you got like 3 monitors stacked on top of each other? that's so unlucky!

When are you integrating ChatGPT into this desk? 😂

@camshand

4 ай бұрын

hahahaa I've actually thought of that many times, to even code a custom avatar face to animate on a display when ChatGPT responds. But I'm also quite skeptical of the level in which AI should play in my creative ventures. So for now, it'll stay as a possibility 😉

@Simon_fpv

4 ай бұрын

@@camshand If you plan on doing something with ai i recommend using ollama on the computer so you can be sure no sensitive info you give to the ai leaves your home, and it doesnt cost as much as gpt

10 more episodes and we will get the hover desk 😂

Oo Sh&* i dont have that box horizontal at all, no clue that was a thing haha, Great vid Cam. What do you think of the desk frame? I personally really like incorporating the legs Motors into the desktop so it doesnt have that frame underneath.

@camshand

4 ай бұрын

yeah it's strange they say both need to be horizontal, I'd have presumed just one but either way mine for sure has a gyro in something haha. as for the frame that goes between the legs and motors, it's super useful for a wooden desktop. especially the IKEA tops which are a wood veneer over cardboard hexagons inside. So it's vital for bracing weaker tops. If I didn't do a transparent top then I for sure would have designed a way to recess the motors up a bit and not require the centre bracing, but for my lighting it needs the desktop to be hollow.

And I thought my built in desk was cool.. I was wrong. Amazing. I'm going to rip my office apart.

@camshand

4 ай бұрын

hahaha dude everyone's setups are amazing in their own way. Legit my teenage setup was a random desk and speakers from a garage sale with a laptop. It's taken about a 6 years to upgrade each part. it's only now I'm able to make the desktop and have the tech to put inside it. No doubt take this series as inspo, but also enjoy your own creations!

1. i love the desk design 2. what mouse is that man? wait lemme guess, razer vmse, beastx mouse, a fantech model of some sort maybe the ulx

@camshand

4 ай бұрын

Dropped a link in the description for you, it's the Gravastar Mercury M1 Pro. It's their first ever mouse, cast aluminum which makes for a very premium feeling shell. Performance has been good so far, but grip did take a bit to get used to since I have large hands. Follow me on Instagram as I'll be dropping a short review there once I've finished testing it out.

I Hope you know i'm stealing this whole design when me and my wife move into our next spot

@camshand

4 ай бұрын

Go for it! I will add the build plans and specifics to a new website soon. for now you can signup for once it's live www.shandstudio.com

Bro I thought you attached the desk to the drawers like I'm doing lol.

@camshand

4 ай бұрын

oh the drawers are staying, waay to handy to have cables and other tech at arms reach whilst keeping the desktop clean and tidy. They're just no longer supporting the top, but no reason yours can't

what is the track called between 0:47 and 0:56 ?

@camshand

4 ай бұрын

the music I use is royalty free, that track is Transporter by Falls. and I licensed through Soundstripe so you may be able to find it on listening platforms.

I knew this would be it but still add an TABLET

that desk adds atleast 100FPS to your computer

@camshand

4 ай бұрын

for sure, and when the RGB is in rainbow mode it overclock boosts to 200FPS 🤙

NICE 😼🤌🏾

Yo

@camshand

4 ай бұрын

Yo Yo!

never noticed bro was this tall (he's 6'3 I think)

@camshand

4 ай бұрын

hahaha I'm actually 6' pretty much on the dot. Does help at concerts but also meant I had to find a standing desk that'd go high enough for me 😅

@NathanSeyoumHailu

3 ай бұрын

That's so cool

When did Aussies start pronouncing “new” as “noo”?

kiss kiss

@camshand

4 ай бұрын

hey broooooo, thanks for always dropping in 🤙