ENTIRE DESK RGB is live 👉👉 kzread.info/dash/bejne/fHWkz5mTlsLTg8o.html

Hi, I am a engineering apprentice and one of the key things that I have learnt is spindle speeds. Its a general rule that the bigger it is, the slower the speed while remaining with a consistat feed. When countersinking you need to keep the speed low to around 150 to 200 RPM to allow the bit to cutter otherwise it likes to bounce. Not having a go at you, just a bit of advise.

@camshand

8 ай бұрын

Appreciate it mate 👍 this was my first time using the drill press, I did consider looking up if there was a better speed but changing the order of countersink then drill worked well enough. Next time though I'll try changing the belt to a lower rpm 🤙

This video put a smile on our faces. We're stoked we were able to help you with your dream desk Cam!

@camshand

9 ай бұрын

Yo Maker Store! Absolutely amazing job with the metal, very happy customer 👏 those tapped threads saved me so much time by not having to 3D print a janky handheld drill guide that I was planning to. Will no doubt be making more orders in the future 😀

@robmulally

3 ай бұрын

@@camshand This is brilliant, I deliberatly left a large gap behind my current desk of about 30cm, and couldn't figure out what I wanted to do with it but I think you may have just solved the dilemma!

Mechanical Engineer here. Have dealt with the "Puzzle" aspect of extrusion assembly before. This made my perfectionist, tendancy-to-overdesign-for-robustness brain extraordinarily happy. Great job mate.

wowwww what a turn out! can’t wait to see this baby lit up!

@camshand

9 ай бұрын

Oh dude just you wait and see! The little tests I've done so far look sooo nice. Just waiting in the final parts to arrive then project LED is green lit! Or should I say RED GREEN & BLUE LIT 😉

This is sick. Super keen to see part 2 of the desk set up. Also, congrats on becoming full time on youtube 😊, you definitely deserve it with the amount of time and effort you out into your videos/projects

@camshand

9 ай бұрын

I'm just as keen to share part 2 with you! Thank you for the congrats, it's been quite the ride from 5am mornings to now being able to build and review tech every day, loving it ♥

That console is a great idea. Perfect way to incorporate things like SD card storage, USB hub, etc. I’m going to have to steal the idea!

@camshand

9 ай бұрын

Yes! I have a thunderbolt dock on the way which will be stripped down and re-housed into the desk as a part of one of the console panels 🤙

This desk design is really awesome and I can’t wait to see video number to where you add the knobs in the LEDs to it!

@camshand

9 ай бұрын

I Can't wait either! It's going to be quite the process, a lot of custom tech to be programmed along the way but cannot wait until it's all finished

When I built a desk with these profiles, I learned to use clamps to hold the profiles together before I screw them together. This is not strictly necessary, but it makes it easier to align everything perfect before screwing it together.

using roll-in nuts into the extrusion makes that soooooo much easier.

great ideas. I'm gonna watch the entire series you have on here. I'm gonna figure mine out as well . this looks like it's gonna be an amazing build idea

Love the POV shots of the glue and the scissors!

@camshand

9 ай бұрын

Glad you appreciated them! Trying to cut with scissors that have a clamp through one thumb hole is hard 😅

can't wait to see the finished result with all the knobs and and cool features. Something I always wanted in my desk is a volume knob to spin! I just really love the feeling of mechanical things and doing digitally on the computer is not the same :( Another thing you could try would be to make wireless macropads with magnetic feet to stick to the metal beams, that way its secure and you could put it anywhere

@camshand

9 ай бұрын

Yooo how good are tactile knobs and switches! Something so satisfying about it. My AV receiver has a huge volume knob that is a great throwback to 90s tech. Love the idea of magnets, unfortunately I did think of that for some other features then remembered aluminium isn't magnetic 😥 For a modular idea though I've thought of removable panels that have maybe magnets recessed into the metal and acrylic. It's a far off idea though as the general desk build doesn't need it. But hey, don't need a lot of the cool stuff going into it haha 😂

Your production quality is through the roof! Congratulations on going full time!

@camshand

9 ай бұрын

Appreciate the support! I'm so happy to be able to work on the bigger projects I've been putting off, such a joy 😊

This is such a cool idea! That exposed miter is an awesome touch and love all the frosted acrylic. Perfect execution

A very awesome project! I'm tuning in and can't wait to see the next parts and the final result. I personally wouldn't like the frosted look for my own custom desk, but this video just reminded me not to stick with desks available in the market. This inspired me to eventually dedicate the same amount of effort and time (and money lol) for my own setup in the future.

I'm really looking forward to how this is going to turn out, this build looks like fun.

@camshand

9 ай бұрын

Me too! I can just picture the knobs, buttons and switches and I get so excited 😆

This was so sick! Your video production is so satisfying, excited for part 2 :)

@camshand

9 ай бұрын

Appreciate the compliment ☺️ there was so much footage to edit through haha. I'm also very excited for Part 2... I have some surprises in store!

ive always wanted to made a massive three sided wrap around desk that follows three entire walls in my studio kind of like this

@camshand

Ай бұрын

For that I'd consider T-Slot, it's more heavy duty for furniture builds with long spans. I got away with V-Slot simply because of the short distance between my drawers. But youd probably want to go a bit heavier duty if you're going wall to wall 👍

idk how the algo finds me cool people like u, ive been binge watching ur channel like 4 hrs straight and what a coincidence that u are also going for a transparent look ive planned a keyb, mouse, wifi router + ups, air purifier all in the trasnparent aesthtic I personally am going for the grey smoke look that is inspired from the Nothing phone 2 and Ikea kuggis smoke colorways I was really confused by the between switching midway to wood and scrapping everything, I think this vid sold me on going back to the transparent look ty for the inspiration!!

Only found this just now, but i'm here for it. I love custom desk builds, wish i had the money and know how to do something like this myself. Mine would look very different, different needs, but still.

Great video. I look forward to the future installments

OOOH This is giving me ideas! I was thinking about using some 2040 to mount my monitors on but now I might also build the desktop out of extrusion cause this looks super cool.

Awesome Video, the quality is great!

Fellow Aussie, and just found you via recommendations ........ looks like ive got the next week's worth of viewing sorted. Keep up the AMAZING work!!

just found your channel and it might be my new favourite. I want to watch all your videos they all seem interesting. cheers.

This is sick!

Very Cool and inspired!

THIS IS FREAKING AMAZING!!!!

SO EXCITED FOR PART 2!!

@camshand

9 ай бұрын

Me too! Final parts should be here before the end of the week so hoping to have Part 2 up by end of the month 😁

This thing is a beast love it

This video found its target audience 😂 literally building a t-slot desk myself rn, the teenage engineering reference made me think “this guy gets it”, then you broke out the rams book and I laughed out loud because ive got the same book right next to me! Love the content!

Great video, man! I can’t wait for part two. Chicago says that you are really clever, she loved the video as well.

@camshand

9 ай бұрын

Yo Aaron thanks for checking the vid out! Part 2 should hopefully be before the end of the month 👍 tell Chicago I'm glad she enjoyed the video 🙂

@camshand I think the table is great, you can share the CAD models with the community

@camshand

2 ай бұрын

I have in the most recent video 😁

@Rap185.

2 ай бұрын

@@camshand now you have one Dollar more i paid 19 Cent deutsche Mehrwertsteuer

Nicee! Waiting for p2

This is so dope man

Nice hat! Scotts awesome!

@camshand

9 ай бұрын

Yoooo yes he is! Such a rad guy ❤️ getting this hat to Australia was surprisingly a challenge lol, we had a good laugh 😂

Dude how cool

Really cool project

The production quality is AMAZING on this video.. I love the project and I hope to see more of these

@camshand

9 ай бұрын

Appreciate the compliments and support ☺️ I'm hoping this project helps to find more viewers like you as sharing my love for tech and custom projects is my favourite thing to do!

that looks sick wow, love it, aaaaand subscribed haha

this is incredible. What in the world kind of tablet is that that you're using to jot stuff down?

Epic Epic Epic! Love this! Legit would pay money for this, great vid and awesome desk!

How did you secure the angle cuts to the frame? I am curious about a 45 degree connection.

Amazing!! wow!

Most material groups tap aluminum extrusions. Glad that was the experience you had. Some vendors just flip you the bird and take your money. lol

@camshand

9 ай бұрын

Yeah it wasn't mentioned anywhere when ordering that they'd tap the threads. I had found a 3D printable insert to brace a drill bit and everything was going to be a really painful job... Incredibly pleased to see it done 👍

i have exactly 3 things to say 1. Boy am i glad i decided to check your KZread page after you told us to on Instagram 2. I am in love with that electronic ink kindle like sketchbook that you used to make sketches of the desk in the beginning 3. I oh so LOVE this project, your enthusiasm the idea and the desk itself are amazing, oh and the DOG afbdhjgh all in all I'm looking forward to your videos and you have one more loyal subscriber !

@askbatguy

8 ай бұрын

regarding 2. could someone tell me what thats called and where i could get one

Slow-Mo acrylic drilling FTW x)

Awesome project mate, can't wait to see the final result. As someone who is about to start building their own dream setup, found this very inspiring. Love your content, especially as a fellow Aussie! You deserve way more subs for the quality of content you bring. All the best mate 👍

@camshand

9 ай бұрын

Good luck on your dream build! As a tech lover I understand how special a desk setup truly is, having your own space dialled in with everything you need. Enjoy the process 😃

Looks great

@camshand

9 ай бұрын

Thank you 😊

Underrated channel

Amazing

instant sub after mentioning the extruded aluminum! I have tons of it laying around and looking to build some fun stuff with it! Do more videos on this!

@camshand

8 ай бұрын

Oh man I'm loving this stuff! What have you used it for? I'm trying to think of new project ideas now since I've always avoided metal but after this it's opened up a whole new world

@A2ZGeek

8 ай бұрын

I built a giant 4x8 assembly table in my wood shop, built a stand for my planner, working on a miter station which is based of a blacktail studio design and currently considering some stand alone tables for my Voron and Bambu 3D Printers. I also have a 5x5 table for my 4x4 CNC. I have some cool pictures for where I got most of the extrusions which I'm happy to share if you want? I work in lighting automation in the film industry and got most of this from a movie called Secret Headquarters. Watch the movie and you'll see tons of it being used for gun racks and other cool stuff. I have lots of behind the scenes pictures too. @@camshand

counter-sink screws on acrylic are really prone to cracking the acrylic. counter bore and cylindric head screws would be way safer in this regard.

Tip. When countersinking, lower your spindle speed to really low. You wont get any chatter.

@camshand

9 ай бұрын

Appreciate the tip! I don't think I've ever used a drill press before so was a bit of trial and error to get the best looking result. It was so old I literally pulled mud from wasp nests out of the belt drive gears 😅

I haven't noticed v-slot extrusion before. Looks great to work with. A lot of the basics on working with v-slot was glossed over. I wouldn't mind a V-slot 101 video with your production values if you've got the desire to make it.

@camshand

9 ай бұрын

It's great stuff! Was there something in particular you wanted to know about how I used V-Slot to make this project? I could cover it in one of the future parts ☺️

@robmulally

3 ай бұрын

@@camshand maybe worth pointing out that some extrusiuon isn't v-slot! I paid a heavy price by accidently getting a non standard slot which was ok for my build but it means that getting new parts and things for it almost impossible to find (cheaply anyway) I did find a site with all the different slot types somewhere. but just a word of caution top double check it for new players.

hey great video this is a super cool idea. is it possible to get the dimensions? to rebuild for myself :D

Hey man, where did you get those heavy duty brackets? Cant seem to find those anywhere online in north amercia

Could have gone star trek layout😂 amazing setup👍👍

Not usually a 'comments on youtube' kinda guy but, jeez - have a bloody sub legend...

@camshand

8 ай бұрын

Appreciate your support Elliot 👍

bro that's amazing!!🤩

@camshand

9 ай бұрын

I'm really happy with it, can't wait to add some buttons and switches 😁

Subbed love the idea awesome work great filming

Very impressive!

@camshand

9 ай бұрын

Thank you! 👍

Dam dude glad I’m following your channel early

Quick question. Whats that tablet you were using to draw out your ideas on?

question, what is that digital paper tablet that you are using?

keep up the good work. love your vids!

@camshand

9 ай бұрын

Thanks for watching my videos , I appreciate it 😁

I only subscribed cause the dog barked "Subscribe". But honestly, this video is freaking awesome. I was excited for you while you were building it.

@camshand

9 ай бұрын

Haha when I saw Bruce bark when editing I just had to do a fun edit 😜 awesome to hear you enjoyed the video so much!

I’ve been evolving my “mega desk” for the past couple years. Each new incarnation is Better than the last

I LOVE YOUR CONTENT

How do I get one 🙏🙏

Hi Cam, I love your desk, I am considering building it too. I have easy access to the parts but I was hoping I could buy the plans from you or if possible for you to share the file from your sketchup design?

@camshand

Ай бұрын

Hi Lucas, all files I used including the SKP are linked in the description 🤙

what kind of e ink tablet are you using?

What type of tablet is that you're drawing on?

What digital drawing pad is that?

Very nice project ! What’s the model of your white pen do you use with your Supernote ?

@camshand

8 ай бұрын

It is the Standard pen in Ivory White. I used to use the LAMY EMR model as the grip matched my LAMY fountain and rollerball safaris, but the Supernote pen has a very fine tip which I like the feel of more 👌

How flexible is the acrylic where your mouse and keyboard is? Does it bounce at all when you press the acrylic?

@camshand

2 ай бұрын

whoa I've never actually intentionally pushed down on it until writing this comment haha. general use no, no flex, but pressing in the centre of the 6mm panel under the keyboard and mouse I can see some flex. Nothing noticeable with normal use.

really nice, what’s that drawing tablet you’re using?

Hey, if you like frosted transparent tech, you should look into the pulsar X2 superclear, very cool looking mouse

@camshand

9 ай бұрын

Ooooh dude that looks unreal! I love the little touches of X and /// markings. I just finished 3D printing my gaming mouse and plan to make some future iterations but as an off the shelf item my goodness is that a beauty! Thanks for sharing

What is that tablet you use to draw?

Amazing video you need way more attention you are making it big believe me. High quality engaging content don't let anything stop you are absolutely amazing I am happy to be at the start of something great.

@camshand

9 ай бұрын

Appreciate your support 👍 the KZread journey is a ride, that's for sure! But this year I'm doubling down with my best videos yet so hopefully more people like you find them 😁

This looks schmick as!

@camshand

9 ай бұрын

Mate soooooo Schmick 👌 keen to get some light and buttons going

Counter sink works better on low rpm

What tablet were you using for your sketches?

@camshand

9 ай бұрын

It's called the Supernote. I absolutely love it, and did a video on it titled "no more paper" incase the following link is removed: kzread.info/dash/bejne/qJxnl9eaYce4j5c.html

what is the tablet he is using?

E inc reader?

Hi cam, what is the intro song name?

How many beams did you buy look into this for myselff

@camshand

3 ай бұрын

There's a parts measurement list on the price list as there were multiple beams cut to various lengths by the maker store supplier linked in the description. But I am going to put together a collection of all the measurements and CAD models I used, should have an update on that in my next video

@Jarebaregtv

3 ай бұрын

@@camshand how large was you desk

@Jarebaregtv

3 ай бұрын

@@camshand thanks

I have to ask…what is that stylus you are using in this vid please? Looks very interesting

@camshand

9 ай бұрын

It's called a Supernote, I absolutely love it. Runs a custom skinned version of Android to be a productivity focused ePaper tablet. I did a review on it titled "no more paper - Supernote" kzread.info/dash/bejne/qJxnl9eaYce4j5c.html

@danielallen6033

9 ай бұрын

@@camshand nice. Just watched it 👍 what about your stylus specifically in this vid. Looks very cool

Can anyone let me know what drawing pad he is using/ app?

@camshand

9 ай бұрын

The drawing pad is an e-ink tablet and is called a SUPERNOTE, I use it everyday, and have made a video about it 👉 kzread.info/dash/bejne/qJxnl9eaYce4j5c.html

Very practical, but the 2 ikea boxes looks too cheap.

What tablet does he sketch on?

@camshand

9 ай бұрын

Hey mate! It's called a SUPERNOTE, and I have made a video about it 👉 kzread.info/dash/bejne/qJxnl9eaYce4j5c.html

i was chuckling in engineerish about the fact that this took you months. good job tho mate:)

@camshand

9 ай бұрын

Well it was over a period of months coming up with ideas, ordering and waiting on material samples etc. and also trying to find an affordable way to do it as damn metal adds up!

Dude u cut everything on laser it’s square lol and why u didnt made the holes for the screws in laser also 😂

@camshand

8 ай бұрын

Amazing question! It was going to cost a lot more to have the supplier cut non squares. So it was purely to save money

Acrylic? Embrace the scratches!

I love overengineering :)

Please use proper ear protection, noice canceling headphones does not protect your ears.

Nice desk! I also build a desk with similar profiles. There is a good free program which makes it easy to construct anything with these profiles: MAY-CAD