Good job 👏

Thank you for helping me achieve my goal!

Great video, was a bit fast but that is expected to cut down on the video time. It is easy enough to pause or slow down the video if need be. Some efficiency steps could be taken: 1. For inserting hardware multiple times like fasteners, insert and fully mate one, then right click -> copy with mates and tick the coincident checkbox, then simply select each hole you want the fastener (lifter/punch/etc) you want that fastener to be concentric with. This would save a lot of the random part placement from your library to empty space and zooming/panning back and forth to set the mates up. - Example of the time saved here could be referenced to your placing the pilots in the top plate. You mated each of the pilots to one face (9 mates), then one pilot to the plate (1 mate), then each of the 10 pilots to their respective holes (10 mates) for a total of 20 mates you had to manually enter. If you used the copy with mates you would fully mate one pilot (2 mates) then select the holes for the remaining (9 mates) for a total of 11 mates. Also, you would not have to control+drag the mouse to make all 10 pilots, as the tool will automatically place it for you. 2. Use of 'Select Other' or Alt key to select faces through faces. This would allow you to mate items without having to tilt the camera to get under a part (like a fastener to select the bottom of the head). Just right click the face you want to hide, hit 'Select Other' OR hover over the face you want to hide and hit the Alt key to hide the face momentarily. 3. Use of convert entities or offset commands to quickly transfer details from one part to another. Pretty self explanatory. 4. Utilize the tools you have at your fingertips. Linear patterning tools for sketches or features would save you time creating a circle or placing points for hole wizard. This is a relatively small tool, imagine something many times this size and having to manually draw a circle for 1000's of holes.

hi...can i have a copy of your library???thank you

👍👍👍👍

hi,did you have demo or did you sale deisgn software

@Halloguys84

2 жыл бұрын

hii...i'm just a solid works app user.

How many hours you take to design?

@Halloguys84

Жыл бұрын

approx. 5 hours sir

Wish you would go slower. Tring to follow what your doing. Its super fast!!!

what's the name of the other software you are using to make sketches

@Halloguys84

Жыл бұрын

Solid works sir

@martinmangwiro2275

Жыл бұрын

@@Halloguys84 may i please have your email?

@Halloguys84

Жыл бұрын

Adikkecile84@gmail.com

@martinmangwiro2275

Жыл бұрын

@@Halloguys84 email sent thanks!

@chrismaes9230

Жыл бұрын

Looks like he is using AutoCad to sketch.... And Solidworks to design.

excuseme can i copy your library of dies part?

@Halloguys84

2 жыл бұрын

emailnya please

@gunturdanang1179

2 жыл бұрын

thanks a lot

@jelasukmawan2359

28 күн бұрын

Hello sir, I also want a dies part library, ?can ​@@Halloguys84

can i ask for spare part die file

@Halloguys84

2 жыл бұрын

email nya kirim ya

where are you .

@Halloguys84

3 жыл бұрын

from cineam

@tamilarasanr2708

3 жыл бұрын

@@Halloguys84 sir I need tranning for die design ,if possible ....

@amrnagah3398

3 жыл бұрын

Would you share the calculations of this progressive die?!