It is very diversified that the needs of 36 steps induction multi-function LED controller , only display some basic functions and effects program integrated in the controller, and if you need other functions and effects need to be customized. The controller with 2-way induction connector input, can be connected to most of the common sensors on the market, such as PIR human body induction module, capacity induction module, vibration induction module, infrared induction module, proximity induction module, etc., The control system can drive 2 types of LED lights, one is the RGB light which supports common SPI single line chips, such as 1903,1909,1912,1812,2811,16703,2813 chips produced by general LED manufacturers, full-color point light source, exposed light, RGB strip light, etc. The DO1,GND,DO2,GND control system at the lower left corner, with 2-way parallel output terminals can be connected to the light strips on both side staircase; The other output is 36-steps single color light strips used on the staircase for stepping, and the number of light strips can be adjusted, if more than 36 steps can also be connected by RJ45 link to upgrade lighting system. The controller operates each parameter setting by buttons and specific parameters are displayed by led screen.