Super Sache,habe die Verlängerung heute eingebaut.Jetzt schlägt mir meine Heckbox bei 2 Personen nicht mehr auf den Kotflügel❤❤❤

Just installed this on my 2023 900 sport. It takes some finagling but it works perfectly and there's plenty of space between the tire. The only downside is you have to remove the rear tire an unbolt the shock from the other side

This thing is pretty sweet now i can replace my rally fender and not worry getting busted up again.

this happens if you go in 2 right? congratulations for the videos, greetings from Italy

Love to win

Do the headlights need to be raised up or any adjustments to the headlight beams

@BLRTUNING

Жыл бұрын

No they do not. They still look just fine at night

Bought one these 3 inch lift. Love it. What tires are you running on front and back.

@BLRTUNING

Жыл бұрын

We run just the stock Kenda tires that you would find on any 600 or 900 model.

@screeminlabmonki

Жыл бұрын

@BiLL Ramseyer ok. I was just wondering. I've gotten a lot of my upgrade ideas from watching your videos. Which are very helpful on how to. The reason for the tire question was, I was curious if you have heard of anyone running 165/50/R16 75 v Formoza AZ01's

@screeminlabmonki

Жыл бұрын

On the front wheels

@BLRTUNING

Жыл бұрын

@@screeminlabmonki we are using the same factory tires. The wheels themselves are from PPA

I know you put the tape on the wrench to hold the nut. Was it still hard to get it on? How hard was it to get the wrench in place? On a scale of 1 to 5 how hard was the modification?

@BLRTUNING

Жыл бұрын

It's not very hard to do at all. The average person that never works on their bike could easily do this job with some simple tools. Would you carry these on our website we have them in stock ready to ship anywhere in the US. www.blrtuning.co

Wow, I did this mod! I have the 900 Rally and to be honest, it wasn't that easy!

@BLRTUNING

Жыл бұрын

Sometimes the bolts can be stubborn

Did you have to adjust your rear shock at all after awhile?

@BLRTUNING

Жыл бұрын

Nope the Elka suspension has been the same the entire time since day one. It was adjusted for us right out of the box when we ordered it directly through Elka and I've never made any adjustments

Hey bill can you do a coolant flush and fill video?

@BLRTUNING

Жыл бұрын

Yes when it's time for us to flush the coolant we will definitely be doing a video. Not sure how long that will be though because it's winter here right now.

I have the stock Rally shock. No matter what setting, there is a clunk when I hit bumps. Does anyone know how to fix this clunk?

@BLRTUNING

Жыл бұрын

Hard to say without seeing the bike in person. Definitely look back there and make sure all the bolts are tightened to torque spec

A few questions since I can't find customer reviews anywhere. 1. Does this lift raise the drivers seat making it a bit more of a stretch to get on? 2. Does it affect in any way the operation/handling of the bike? 3. Is it a better option than Can-Am's 2 up rear spring? Replies would be much appreciated. Thanks.

@BLRTUNING

Жыл бұрын

It will raise the seat up only about half an inch since it raises more towards the back and pivots on the front wheels it doesn't actually lift the seat up 3 in. If that makes sense. The bike still handles good. If you're looking for better handling options go with the steering stabilizer kit. We carry those on our website as well. That would be the biggest improvement to the handling. The two up spring can still allow the bike to bottom out against the fender in the rear. The two up spring is not going to lift the bike at all it's just a stiffer spring. It allows for about another 50 to 80 lb of weight to be put on the bike.

@simonwhite5627

Жыл бұрын

@@BLRTUNING Thanks Bill, your response helps. Tell me if you can find any fault with my thinking on the following. Since I have a SpyderExtra 3 piece luggage system, it seems to me with the added weight plus luggage and plus my passenger I'm better off going with the shock lift than spending money on the 2 up spring. I have a new end links and sway bar which has already improved handling so I don't think I need the steering damper system as I'm on mostly smooth roads. Thanks again.

@BLRTUNING

Жыл бұрын

Yes I believe your statement is correct. If you're running the three-piece luggage system and putting some weight back there the suspension is obviously going to sag so adding the lift kit will help maintain a better ride height. If it was my bike that's what I would do. Then after doing that if you feel like you need a stiffer shock in the back maybe go with two up spring or add elka suspension to the rear. The lift kit will still work with the Elka suspension. Here's a link to the lift kit on our website. www.blrtuning.co/products/can-am-ryker-lift-kit-not-for-2022-sport-or-2022-rally-shipping-included

@simonwhite5627

Жыл бұрын

@@BLRTUNING Thank you for such a timely and detailed response. I think I shall accept you advice and purchase the lift kit. Cheers -

Another question is this going to make my rear shock on my rally non adjustable. On the their web site they said it has to be adjusted almost all the way down 3/8 of thread showing. To me that's kind of defeating the purpose putting this on a my rally I want to be able to adjust the shock.

@BLRTUNING

Жыл бұрын

Your rally suspension will still be adjustable. This will not fit the 22 model rally or 22 model sport. If you have a 19, 20, or 21 it will fit. Your suspension will still be adjustable you just need to soften up the suspension so you have enough room to get the lift kit installed. After installation you can then adjust your suspension to how you like it. Also we do have these available on our website. We are now a distributor for spyder extras so you can order directly through us. We ship anywhere in the US and our prices are listed with shipping included. www.blrtuning.co/products/can-am-ryker-lift-kit-not-for-2022-sport-or-2022-rally-shipping-included

@FredB561

Жыл бұрын

@@BLRTUNING awesome thank you sir

@MegaRassal

Жыл бұрын

@@BLRTUNING Would you know why it doesn't fit 2022 Sport and Rally? I have a 2022 Sport, that i got FOX Shocks all over, and i wonder why it doesn't fit the 2022 Sport & Rally, trying to see if it doesn't fit with the new suspension Can-Am uses for 2022 Sport and Rally, and if FOX Shocks would make it compatible... just trying to know why says it doesn't fit 2022 Sport and Rally

@BLRTUNING

Жыл бұрын

@@MegaRassal it's because on the 22 Sport and rally model the shock is actually longer and the a-arm will not drop down that far. I cannot confirm whether or not it will work with your Fox racing shocks. We do have the lift kits in stock if you decide to order one from us. However once it's installed we can not accept the return because it's a third party sale.

@BLRTUNING

Жыл бұрын

@@MegaRassal www.blrtuning.co

2019 ryker really would it work? Stock Kyb shock

@BLRTUNING

Жыл бұрын

Yes

I need the program tune I have everything but the downloaded program

@BLRTUNING

Жыл бұрын

If you're talking about the custom tuning for the Can-Am ryker for the pv3 please send us an email. If you head over to our website and scroll to the bottom of the page you'll see our email address and phone number. We will need some information from you. www.blrtuning.co

I'm in Pa how can I get my 2022 ryker tuned ?

@BLRTUNING

11 ай бұрын

You would need to order the dynojet PV3 from our website you can order it with a custom tune installed ready to go right out of the box. You'll need to contact me after you place your order to let me know the exact year make and model as well as any performance parts that you have put on the bike. Things like headers, K&N high flow replacement filter, modified air box, modified air inlet scoop, RAM air intake system, exhaust... These are the parts that I need to know about to build your tune correctly. We have the Pv3 in stock and on sale at this moment. Here's the link to our website. www.blrtuning.co/products/can-am-ryker-pv3-25-11-by-dynojet?variant=42590084169913

Why cant we use it on the sport?

@BLRTUNING

Жыл бұрын

On the 22 and 23 sport model and rally model they switched to a different shock. The shock on the rear is a little bit longer. This will cause the shock at the bottom to rub the tire when there is nobody sitting on the bike. Once somebody is sitting on the bike it won't rub anymore. It just needs a little bit of weight applied. The manufacturer says it will not work with the 22 sport or 22 rally model or the new 23 models. However we have had customers that have had it work successfully with those models. So purchase at your own risk. If you're buying it through us and you're putting it on one of those models that says that it is not for. We will not issue a refund or return the item. You are purchasing it at your own risk understanding that it may not fit your bike. If you have further questions please get a hold of the manufacturer. We are just a distributor for this product.

Way too much money

@BLRTUNING

Жыл бұрын

Not really. If you seen the machinery that cost thousands of dollars to make these. If you had to buy that machinery out of your own pocket. I'm sure you'd reconsider what "way too much money" is... Expensive parts are definitely not for everybody though. Is this an expensive part yes absolutely. Is it overpriced... no not at all.. you getting the highest quality part that you can possibly get your hands on. You're getting it from a reputable company who is very well known for getting things out on time and making sure you get what you actually ordered and not get ripped off. You're also getting something that has been tried and tested and make sure that the product works. Imagine paying a little bit less for a product that might fall apart over time. Like I said is it expensive yes is it overpriced absolutely not. Expensive parts are not for everyone

@ryker4124

Жыл бұрын

@@BLRTUNING I disagree with it not being overpriced, by a lot. Their machines aren't exclusively for making these. Something like this takes very little R&D. I'm sure in short order someone else will put out a lift/spacer for at least 50% less, and I'm talking the $139 price from Slingmods, and it'll be made of the same material and wouldn't be subject to fall apart no more than this one. The only reason it's priced so ridiculously is because it's the only game in town right now. If I wasn't retired and still had access to the equipment I'd have my own already. It's not rocket science.

@BLRTUNING

Жыл бұрын

@@ryker4124 they are available on our website at the following link. 2 day priority Shipping is included in the price. www.blrtuning.co/products/can-am-ryker-lift-kit-not-for-2022-sport-or-2022-rally-shipping-included

May be a bit personal but whats your overall weight with both passengers. Im only asking to see if a 3 luggage kit with me and my wife will be fine. My mom and dad are on the bigger side being about 480lbs total weight together on my can am they bottom out and i wanna configure so everyone can ride safely. Me and my wife average around 300lbs together. Im just trying to get an overall understanding on what im looking at in the video to weight measurements.

@BLRTUNING

11 ай бұрын

My ryker is set up to handle between 500 and 600 lb.. that would be me and my wife and all of our gear... If you put any more than 250 lb on the bike and you don't have the lift kit installed the max amount will most likely end up hitting the fender eventually. These bikes are only designed for around 180 lb from the factory. That would be if you put the suspension at its stiffest setting if you have one of the bikes that have the adjustable suspension. I'd recommend stage 3 Elka suspension at the minimum. With the lift kit installed. At least on the rear end of the bike. Remember when you order Elka suspension directly through their website they ask you a series of questions to determine how your suspension should be set up and what spring they should use. I've never adjusted my suspension once since I've gotten it out of the box. It doesn't need any adjustments because it's all set up for me and my wife and our gear to be on the bike. That's how they send it to you. If you have any further questions and you'd like to talk more please send us an email. That's a much easier way to get in touch with me then KZread notifications. Sometimes I don't see these notifications for days... BLRTUNING.TECH@GMAIL.COM