I think you can pull out those little tops on candlesticks with a plyers before you paint or do anything with them.

@justme-on7bn

Жыл бұрын

Yep, I have done it. They pull right out.

@bexncarl

Жыл бұрын

I was thinking the same,maybe heat the top a little to release any glue inside.

@rebekahweishaupt1744

Жыл бұрын

Agreed! Pull that metal out 😆

@rebeccaderzinski6489

Жыл бұрын

Yep! I’ve removed them before as well!

@SonnetsGardenBlooms

Жыл бұрын

Thanks for the tip! I’m going to try it!!

I like all your crafts the way you created them. I'm sure the comments on what you "could" do are undesired. Keep doing what you like, you have lots of talent!!

The candle holders turned out beautiful! I usually pull the metal cups out and fill with wood glue and wood shavings. Then top with a wood round. If I don't have shavings, I will cut down a dowel and fill with wood glue.

I loved both of the trays! Loving birds too so the cutting board was adorable!

Try pulling the metal out with some pliers. I have before. Your projects look great!

@SonnetsGardenBlooms

Жыл бұрын

Thank you!! ❤️ I’ll try pulling out the metal piece.

I think painting "Gather Together" black would look very nice.

E-6000 with a dot of hot glue will keep the rounds on for sure as long as you apply plenty of E-6000 and just a Dot of hot glue to keep them on there until the other glue dries... I've done it several times.... I think the two colors would've been exquisite! Maybe cake batter underneath apothecary? Love your projects girl! Can't stop watching 😁😁😁

Cute projects. Love the birds and how you do the tags. The basket is super cute!

Wahoo!! You are killin’ it with the stash!!

❤❤❤ I love watching you. I get a lot of ideas! You are very talented…. In my opinion, the galvanized “gather together” would look excellent in black. I’m not a big galvanized fan, anyway. But if you like it, leave it! ❤️❤️❤️

I have a chess board JUST like that, of which I was trying to figure out what to do with it... Mine folds in the center and I thought maybe a lap tray or treat of some sort with handles... Not sure. But you always give me great ideas! I'm just beginning to think about getting a booth at a local antique shop so you've given me SO MUCH inspiration!

I ❤ all the projects. I ❤ the apothecary color😊

Cute projects! I love how you changed the sign color from the white. I think it looked much better. I think I would prefer a stencil saying "Gather". I don't like the together. And maybe a few small pics around the corners. Really loving the stash clean outs though. I'm getting lots of good ideas!

Love the bird soon much!

Like the apothecary on the sign , I agree the letters need a bit more pop so maybe outline the letters black . Just edges so the galvanized shows . Love all the projects today .

Flips are my favorite!

Usually you can pull out the metal candle insert. Sometimes they're screwed in. Sometimes it's just glue holding them in. But you could also cut a wood dowel down to fit inside and glue or screw a wood round to that.

I think you did an excellent job with a quick flip turn around! Really love the Apothecary and I especially like how you group items together with the same color so we get a different perspective on how it works with different surfaces

@SonnetsGardenBlooms

Жыл бұрын

Thank you Cindy!! ❤️

I like the white wax much better on the candlesticks....Great job on everything looks beautiful!!!! Love the cutting board....

Sonnet... you can pop those little metal round things that are in the candlesticks right out and then glue and/or nail your wood round on top. I take a flat top screw driver or a metal putty knife and stick it under the lip and just slowly pry it out.

Love the candlesticks.

Maybe fill the hole with paper clay or Bondo up to the level of the metal piece. Then you would have a larger space to glue your round. Just a thought

I like it with the galvanized metal words

Yes please, let us see your other spaces, I love that you can’t find your spring ribbon! 😂 it makes me feel better about my messy craft hoard!

Lot’ of nice things😊 you make 👍🏻about the board - it’s in Norwegian (except for the word hunger) the text was Hunger er den beste kokk, translates to hunger is the best cook. And the rest was a simple old traditional rosepainting (rosemaling). Probably americans with norwegian ancestors that had it.

Loved all the projects

New to your channel. Enjoy your designs… Don’t forget to Sign your pieces! ❤❤❤❤ ⭐️ STRAIGHT OUTTA TEXAS

I like the galvanized but I think black lettering would look great!

love all you projects. personally i think the galvanized "gather together" would show up better black

Love the apothecary color!!

I think I would like it black

I would have painted the galvanized letters black to match the trim. I loved all your flips 😊

I love the gather sign, but I think IOD transfers would look awesome.

vote for the sign gettimg a black paint job on the gather sign. All were great redos.

Sonnet, you should be able to pull out the little metal cups. They usually come right out. I think everything looks great, and you are getting so much done. God bless.

I love the flips. I would paint the lettering black.

You can pull the metal ring off the candle sticks with small pliers. I did it on one of mine, and they came out really easy.

Enjoyed all the flips.

@SonnetsGardenBlooms

Жыл бұрын

Thank you Christie! ❤️

VERY NICE!! THANKS FOR SHARING...

nice job, everything looks awesome.

I loved your video! I especially love the sign! I would paint the galvanized saying with black …..I think it would make it “pop”!

Love the gather sign

Love them all!!

Great Flips gurl!! Thanks dear, Kathylyn Ray from N.Mississippi

I love them all.

As always I love your flips You can see if the sign sales like it is. Which is beautiful but if it doesn’t then paint it black or white.

I think a copper or rest on the galvanized words would look amazing

I agree with the white wax on the candle sticks

Yes you can pull those candle cups out slide a flathead screwdriver or similar under the rim go around and then pop out 🙂 oh also look inside first sometimes it's screwed in so you'll have to just use a Phillips screwdriver first 🤪😁

In the first flip ( the 2 candlesticks ) while they turned out lovely but I think, if it was me, I would have rubbed off some of the paint once dry to show a hint of the gold on the high points before waxing it. The white wax in the deeper areas and the gold on the higher areas would have added a hint of spring sparkle.

Your up cycles were so encouraging. I must get busy adding some new stuff for Spring. I loved the white narrow tray but that cutting board with the bird from Roycycled was my absolute fav! I can’t wait to see everything shrink away from inside your greenhouse 👀 !

] I absolutely love that apothecary color. Everything looks great. I agree with the person who said to make the letters on the sign look a little more rustic however

I have done that with candlesticks. I put a small wooden cube in the middle thats I secure with E6000. That gives you more area to secure the riser to.

It looks great.

Always so creative with your flips. The last project turned out great. Suggestion I would have made the tin letter rusty crusty. ❤

@mbweis1012

Жыл бұрын

Yes I think the cinnamon rust would look great

Loved all of them! Gosh I love apothecary - it's such a great color!! :)

Black would look great for the lettering with the black frame

I love the Apothecary paint color. All the birds are beautiful. I love the bowl, Oh Sonnet I love all of it. ❤️

I actually pulled the metal pieces out of my candle sticks, needle nose pliers and twist 😊

Love your projects today!

you can pop out that metal cup. It looks like there is a hole in the bottom of it. You could bend the end of a hanger and use that to hook it and pull it out.

They all look beautiful! My fav is the basket with the adorable bird tag! TYFS!

Sonnet, I look forward to your videos... so much inspiration.

The gather sign could possibly be made to look rusty to contrast a little more with the apothecary color and make it look more worn rather than shiny or solid black. I vote "Rust!"

@sharongodwin1477

Жыл бұрын

I agree....or even dark antiquing wax. I think black would be too harsh.

@SonnetsGardenBlooms

Жыл бұрын

Great idea! A viewer on my LIVE mentioned a rusty product that I can grab at Hobby lobby. I’ll have to check it out!

The medal part usually pops right out with snips.

Sonnet, on the candlesticks-with a flat -edged screwdriver, pop the candle holder out, fill the remaining cavity with putty (or air dried clay) and this will be a more stable base as a riser. Know this works, have used this idea more than once. Favorite piece, the sign left as it is with the galvanized letters. Thanks for sharing

Centerized is not a word.

Love the gathered together sign as is. I wouldn’t paint it.

Love the sign just the way you have it! Everything was awesome!

You did a great job

Yes, you can pull those metal candle cups out.

Hi Sonnet…..they all came out great and I think the Gather Together sign looks on point Have a great weekend

Love everything, it’s hard sometimes to decide how to flip stuff, some things come easy others you just feel like giving up. I love the apothecary distressed background with the black frame really cute.xx

Yes, I love the white wax on those candle sticks!

Hey Sonnet, I love all of your creations. On the sign, darling up the words will make it pop!!!💞💞💞

@SonnetsGardenBlooms

Жыл бұрын

Thank you Delissa!! ❤️

I love all these projects and the hammered metal gather side looks fine on that board, to me. You can always bring it back home and paint the metal if it doesn’t sell. Hope to catch you next week on your live !

They all turned out pretty cute. I’m really enjoying your these videos and your enthusiasm 💕☺️

@SonnetsGardenBlooms

Жыл бұрын

Thank you Gina!! ❤️

Lots of great ideas! In the last project I would take the metal wording off, outline it in black and then re-attach.

Loved the basket and candle sticks, it would take me a month to complete what you did here!

Sometimes the metal part that holds the candle pops right out

@SonnetsGardenBlooms

Жыл бұрын

Thanks for the tip! ❤️ I’ll try to pop it out.

Sonnet I like the Gather sign it turned out really nice 😜 everything turned out really well, very pretty. I love the color apothecary

❤❤❤

Hi Sonnet! I love the way you did the cutting board with the lavender-accent bird decoupage. (I think the saying was "hunger makes the best cook". Much better the way you upcycled it!)

I think black lettering would stand out better. It's a pretty frame.

@cassfonnesbeck8057

Жыл бұрын

I think so too!

Nice!

The galvanized words look good to me. If it doesn't sell you can always reevaluate it. Many of the metal candle cups will come out of the candlesticks. Definitely worth a try.

I think its very nice

In your studio, is the brick wall original brick or painted panels of brick. Looking for something for my kitchen or Living room walk. Like your videos. I get inspired. Plus, your hauls blow me away.

I think they all came out great! If the gather sign doesn't work as is maybe try the rusting it to go with the distressed piece

IMO leave the galvanized lettering. Love everything you flipped!

I would try a piece of lace for the ribbon on the basket. Cute Basket!

Everything turned out great. I think I would paint the gather together black, seems to get lost a bit in the metal tone. I think you should be able to pull out the metal cup and the candle sticks and then glue on the wood rounds. Thank you for your inspiration in getting into the hoard, I've got one of those too!

On the last project...am so over signs!! Make it an art piece with flowers etc. For Spring! Use decoupage or transfers or both!

you can remove that medal on top of candle sticks .

I loved everything, very cute. I have a question where can i get those DIY paint. thanks

I would paint the metal gather white

They pop Out. I have replacements and always pop them Out to freshen them up.

you ay be able to pop that centet cap outof your candle sticks

👍🙂

Make the “gather together” rusty.