Spray Paint Only The Damaged Area
Автокөліктер мен көлік құралдары
In this video I'll show you how you can do spot repairs, whether its damaged clear coat , a dent or ding that needs body filler or primer or deep scratches that have gone through the clear coat, you can do this using nothing but rattle cans.
Here are links to products which were used in this video:
My Amazon Store: amzn.to/3YH84sm
2k Clear Coat: amzn.to/3OzXLSo
2k Rapid Filler Primer Gray: amzn.to/3DZy9JT
5 Inch Orbital Sander adapter: amzn.to/45sc8PG
600 Grit Sandpaper: amzn.to/3QKl2Ug
Grease and Wax Remover: amzn.to/45dOV3D
Soft Sanding Block: amzn.to/45fXkDU
Microfiber Sponge: amzn.to/45wA18A
Microfiber Towels: amzn.to/45aTT1c
Facebook: / ratchets2015
Twitter: / ratchets15
Instagram: / ratchetsandwrenches
Disclaimer:
Due to factors beyond the control of Ratchets and Wrenches, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Ratchets and Wrenches assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Ratchets and Wrenches, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Ratchets and Wrenches.
Пікірлер: 55
Here are links to products which were used in this video: My Amazon Store: amzn.to/3YH84sm 2k Clear Coat: amzn.to/3OzXLSo 2k Rapid Filler Primer Gray: amzn.to/3DZy9JT 5 Inch Orbital Sander adapter: amzn.to/45sc8PG 600 Grit Sandpaper: amzn.to/3QKl2Ug Grease and Wax Remover: amzn.to/45dOV3D Soft Sanding Block: amzn.to/45fXkDU Microfiber Sponge: amzn.to/45wA18A Microfiber Towels: amzn.to/45aTT1c
@fp-17
Ай бұрын
Can you please help me? I have a few questions about my car is there. A number I can reach out to you
Thanks for the video, seems like a good budget option for a lot of us out here!
great job. Fact of the matter is, with older cars, as long as we can do a decent repair job to make it look better than it was, there is no need to go to expensive body shops. This turned out great. No one is looking at our cars that hard ever. You do great tutorials.
So glad to see you again ,I’ve been thinking the past few weeks wondering if something was wrong hoping you were ok.
Indeed. The blending of the clear coat is tricky. Thanks for the information.
Ah spring the season of paint repairs and the sweet smell of 2k clear
This is a nice Pro / DIY blend.
Glad to see some more content!!!!
Nice work. Good coverage of all the steps
I'm no professional im 28 I started working as a tech at a body shop back in 2020 I know alot but not everything. Only thing I'd critic on the door is, I would have pulled the door panel off and tried to level out that low spot. Always the less filler needed the better. You also had a decent amount of 80 grit scratches showing but overall pretty good.
Eman! Where u been bud! Nice to see you again. Great job on the body work. May be worth mentioning doing a guide coat. Lol I'm the same way, laying down the primer and looking at the dent saying "awww shittt" when you notice its low or high 😆
Where did you go !?!?! And welcome back ! Duty Sulphur reporting for duty !!! Lmao (do it yourselfer)
The primer color looks so satisfying.
Always a treat bro!!
AMAZING instruction video!! You covered all the basics. Thank YOU SO MUCH for the video!
Glad to see a new video!
Other dent under the door handle.. :-) Not caring if your beaters dented works too. :-)
Nice work. Thanks
great job you should make more of these videos you go into detail. Excellent
Excellent video, thanks!
I literally own the same whip with a dent in the exact same spot
Excellent video
Very nicely done. I get a bit mental planning my masking on something like that. Generally move the masking after the base coat so I'm sure my clear has covered all color.
Amingo, you are forward again. Big up yuh self, from Jamaica. Yes I.
Stunning
Thats a hell lotta work for a small dent. The sanding, priming, blending... Gosh. Its doable provided there's equipment and time.
@El-Burro-Grande
Ай бұрын
There's a reason why body shops charge so much. It is a LOT of work.
@Jim.Lake.
Ай бұрын
Not sure what else you’d expect. To get the bare minimum of acceptable results, the prep involved for painting takes a good chunk of time. If you enjoy it as a hobby it’s not a big deal. If you’re just doing it to save some money, then bodywork probably isn’t worth it. After the cost of materials and time to get it done you probably won’t actually save much.
@MrAcc45
Ай бұрын
@@Jim.Lake. Yes indeed.
Busy patching up my 2004 Hyundai Coupe (Tiburon), scrap value in UK £200 😁 It will be fifty shades of black by the end but it drives just fine.
Nice job, quite a process. Not quite so sure about the socks and sandals though ;)
❤ love you videos ❤
Great video again. But you forgot to tell us how long to wait between basecoats. Also an extra second to show us the polish or polished you used would have been nice. Those little things make the perfect video.
I do wonder if the paintless dent removal guys would repair this dent. They seem to work magic. Shrinking stretched panel must have a limit.
I'M TRYING TO FOLLOW STEP-BY-STEP DID YOU DIP THE SANDPAPER IN WATER 12:17 GREAT JOB!!!!
Geez. Where have you been? Nice new camera!!! (Addendum: It turned out pretty decent! Good job.)
Good to see you again!
Good enough for government work.
I know you have quite a few videos on painting, but what would be the DIY solution to paint coming off with primer? My white car's paint is flaking and exposing the metal surface in one go. (As far as stopping it from getting worse, and would blending the paint next to the bare metal be fine for priming over
@orangeflavoredmf
Ай бұрын
If you mean feathering out a valley that goes down to the bare metal, you need to put a few coats of primer on it to fill the missing paint thickness, for that you have to use high build primer from a compressor paint gun, the ones that come in a spray can are very thin, those are only good for covering burnthroughs and filler. If you don't fill the hole it will show up wavy when you're done painting it.
@thymanbearpig7555
Ай бұрын
@@orangeflavoredmf noted, that makes sense. Thank you
What kind of illegal socks & sandles combo are you rocking at 22:00 ?!?
👍
Nice shoes.
So... at the end there... were you sitting too long? Or limping because the avocados?
@myRatchets
Ай бұрын
Injured my ankle playing soccer between the basecoat and clear coat day lol
@danielsimpson8929
Ай бұрын
@myRatchets well that'll do it. In my youth when I twisted an ankle during soccer I just stomped it a couple time. At this age think I'd need to be carried off.
I can smell the bondo
@senorpepper3405
Ай бұрын
Stop sniffin it😂
@14:29 👍
PDR, touchup paint, and try to not show the customer that side of the car as much as possible. Used car sales department knows best!
@R&W - Haven't seen u in a bit... Good to have u back. "Spot/area" repair is useful info, everytime I tried/made one it sucked bigtine 🫣. Anyways... Also looking forward to any update (ECU repair?) on that Lexus LS400 (my favorite all-time vehicle).
@myRatchets
Ай бұрын
got 2 "rebuild" ecu's for that car both bad. Finally the third one worked. seems like 93-94 LS400 ecus are hard to rebuild or break down a lot!! anyways I would stay away as there will be a point you cant' find the ecus anymore. GL