Is there any way that I can paint my bike without having to dissasemble it??

@ETOE

3 жыл бұрын

Yes check this video: kzread.info/dash/bejne/mIppkrKydNywdLg.html

@sml2238

3 жыл бұрын

don't be a pussy. use a sledgehammer to disassemble it!

@ice-tgaming4609

3 жыл бұрын

@@sml2238 yeah ahahaha

@1to10review

3 жыл бұрын

Ask ur girlfriend 😝

@billrose2202

3 жыл бұрын

Sure just dump it in a bathtub of paint and finished haha

My girlfriend painted my frame, it came out gorgeous.

@MFormers

3 жыл бұрын

Pussy

@franciscorodriguez275

3 жыл бұрын

@@jakejollimore5453 If it´s in Martin´s voice, haha. If it´s just you trying to grab a like well, fuck you.

@JonathanDiaz-on9mo

3 жыл бұрын

did you drill the rivets or her? ...lol

@Laughter_Shots1

3 жыл бұрын

😂😂😂😂

@dylanguthrie2716

3 жыл бұрын

Jake Jollimore you reek of toxic masculinity

I came to see how to spray a bike but instead my manhood was insulted

@fehlrock

4 жыл бұрын

Lol

@joeh773

4 жыл бұрын

you mean your womanhood, right ;)

@James-yy4vl

4 жыл бұрын

Get your girlfriend to dry your tears for you.

@_tanitani_

4 жыл бұрын

I came to see how to spray paint a bike but instead my humanhood was insulted.

@scalercenthusiasm6983

4 жыл бұрын

pussy

Just signed up to Tinder so hopefully I can soon spray my frame.

@TrollingVideoz

3 жыл бұрын

Lol

@killjoysenpai5311

3 жыл бұрын

Pussy

For the amount of bikes this fella has done and still have the enthusiasm and energy day after day I have to say that is a rare thing in this day and age. One of the funniest youtubers out there. Great way to pass the time and put smiles on people's faces.

If you are too scared to drill holes you can ask your girlfriend’s boyfriend to do it.

@davidwells6556

4 жыл бұрын

@ Zairem Renthlei I would give them my phone number, but they can get it from their girlfriend.

@CyclingLifePT

4 жыл бұрын

I have to get a girlfriend first, but that conflicts with my daily schedule of riding my bike...

@tommycocacocke

4 жыл бұрын

@@CyclingLifePT dont! I got one! You Will end up with 2 passangers behind u in a trailer the one time u get 2 ride!

@lyan9923

4 жыл бұрын

could have converted to internal cables... but perhaps there was no girlfriend around?

@izigswe

4 жыл бұрын

The holes are already there from the begining.

That looks amazing. I would not believe that finish was achieved using spray cans. It just shows you what skill/experience, time and patience can achive. Great job!

Thanks for all your tips ! After so many man hours, I managed to successfully paint my bike using spraypaint with amazing results!

This guy is really cool. Definitely a character. That's what the world needs .

Once again Martyn, you blow us away with your enthusiasm, humour and willingness to share your knowledge... Massive thumbs up 👍

@petartoshkov2076

3 жыл бұрын

Give it your thumbs up, or ask your girlfriend to do it if you are too afraid

@fkbrains1769

3 жыл бұрын

@@_kngts2293 hahahaha man up ya 🐈

@Daniel-dj7fh

3 жыл бұрын

@@petartoshkov2076 Naja, that was pretty bad German humor

I love how it’s super informational and mixed with a little humour. Good job Martin!!!

I don't even have a bike to paint I just like the guys sense of humour 😂

In my experience, painting your own bike is a recipe for problems. This guy is a pro. He makes diy look so simple and for him it is. I’ve tried twice now to paint my bike and run into issues both times which rendered the job a waste. If I can be bothered with it I will be paying someone like this artisan to do it for me.

This guy cracks me up he’s a legend and always does an amazing job 😀

Progress with each video :) - great music and sense of humor on high level as always :)

This was such a fantastic and complete walk through. Thank you

this guy should be a world famous bike painter like wow

This is the content I came for. Can't wait for more budget videos or how to paint your bike in one day or something out of comfort of your place, like, you come to Berlin and you improvise on my frame, on street. Nice job as always, I see why are you pro painter and not comedian.

Thats a hell of a impressive paint job that puts some top brands to shame. Lots of respect.

Thanks for this. Just bought a fork that needs to be painted a different color to match the bike. This all helped out a bunch!

Wow! This is my favorite color! How did KZread know that I want to paint my bike and even in that color?! Dude you inspired me!

mann, your work its amazing and so much inspirational

another great video, thx dude :D PS: you sense of humour is hilarious hahahaha

Love this video! Especially the comments on the drilling holes on the frame, HAHAHAHA

Great video! Thank you for being so complete and fun.

Time to turn my Trek Madone into a Shrek Madone

@oftankoftan

4 жыл бұрын

Shrek mad one

@antonhelsgaun

4 жыл бұрын

oh no. What are you going to do to my brand new trek madone?

@Saltria

3 жыл бұрын

@@antonhelsgaun he making it cooler

@Saltria

3 жыл бұрын

@@antonhelsgaun he making it cooler

took me the whole vid to figure out what your shirt and the sticker really say xD

One of the best videos in this topic! Thanks for the lot of info!

What a great tutorial, thank you so much!

I love how you use montana's ETOE, Ive been a graffiti artist for 14 years and its my preferred paint for everything! I painted my track fairing for my motorcycle along with many bikes, always holds up and allows for nice paint fades and quality opaque colors. Good stuff man! You are reinforcing techniques I have been using for years, good to know I was doing it right from the beginning.

@JP-it7ln

4 жыл бұрын

I've used MTN 94 for my motorcycle fairing and seems okay without clear coat so far.. been meaning to re-do them. Any reason to use the product mentioned in the video over MTN 94? if better, I might give that a try.. also have you put 2k clear on your finish? no issues?

@IraklisKourtis

Жыл бұрын

Hi Moto, I tried Montana Gold but was getting blobs of paint all over. I noticed that nozzle gradually gets saturated and then it sputters the blobs. Any ideas how to avoid this?

@motowerkz3678

Жыл бұрын

@@IraklisKourtis Hey man, the only way to avoid this honestly is cycling through multiple caps. Caps are super cheap, I would suggest getting a sample pack so you can test a bunch of different styles. Most likely you would want a "blue dot" cap. You want a low pressure cap meant for fading because they have better atomization. This modern day paint from the high end brand is SUPER opaque and thick so it has CRAZY coverage. So after using half a can or so of paint you will get some spatter because the paint is drying in the nozzle as you are spraying. hope that helps. also if you have a local graffiti shop, go support it.

New to your vids. The clowning in the beginning hella caught me off guard! Lol peaked my interest to check your channel. 👍

1 minute in and I already love this guy. Subscribed!

Excellent! Thanks for this. This enabled me to produce the best quality DIY spraying of a frame I have ever done 👍🏾

@lilseal7524

2 жыл бұрын

Can you help share where you got your products from? I’m in Canada and looking to touch up a carbon frame with gloss red. Thx

I was thinking about DIY painting my bike frame, but now I'm saving money for someone to do this for me...

@trentwilliams5212

4 жыл бұрын

Yep

@HappySingh-ri9qh

4 жыл бұрын

🤣

@Jon2cut

4 жыл бұрын

Are you pusSY?

@mymindfulhome1013

4 жыл бұрын

Zero Kun I also live in a small house so Ill have to do that in the living room 😂

@ericmuller6582

4 жыл бұрын

You also can ask your girlfriend...or your microwave or...

Great video, thanks, a really good finish. I cringed a bit at the end when riveting the cable guides, I thought you may scratch the frame, I would have had my work table covered in old carpet. But I watched the whole video with admiration for your skill.

Just what I needed...literally stripping my frame and this video popped up on my feed. Great video...subbed.

hi Martin, you changed my life! I now dare to do this spray-jobs, I'm truly grateful!

The quality does look fab. I would love to see someone attempt a painted raw metal effect, with brass burnishing and weld burns. something i have been thinking about for while but no idea how to attempt

@heatherfoster7823

2 жыл бұрын

Start by stripping your bike down to the steel. I use EZ Strip. Just paint it on, second coat 10 minutes later and then wrap it with plastic wrap. Wait like and hour and the paint will be falling off. Scrape it with a paint scraper, wash it with water then scrub it with #0000 Steel wool and Brasso metal polish

Great paint job! Do you have to sand every coloured coating or just the every clear coating only?

@dickskinthin9192

2 жыл бұрын

Only sand the primer and clear coat. Paint should need sanding unless you mess it up and get drips.

I came here to see something simple but you've given me something much better

Great video, will use the techniques on my retro build. Thanks for sharing the info.

Dang, I wanted him to build the bike up soooooo bad, that would look nice

He had to go ask his girlfriend for the rivet gun adapter. HAHAHA

Brilliant work. Thank you for inspiring me!!!

Very very useful information, I'm about to paint my frame, and I'm not scared to do by myself, thanks to this Vid. it's awesome I've got a great motivation. Thanks man. props!!!

I enjoy all your paint videos, and you inspired me to do also a bike painting. I used the color brand you recommended, but failed on things I didn't expected. 1. Glue of the Masking tape stuck on the color - (what is wrong? More Sanding between), I used 3M tabe and oramask) 2. Small paint chips after removing the masking tabe. I'm sorry to haven't made a video on that ☺️

Hi Martin! Thanks for your awesome tutorials and sense of humor. I was wondering if you could give us more information on the "drying time" inbetween the primer, top coat, decals and clear coat. I have read the instruction on the can but I heavily failed my test projet. Thanks!!!

@drollish1572

4 жыл бұрын

Veganozaur same here, would be nice to know the dry time between all layers

Thank you for your video! now i know how to properly paint my DIY ebike!

You saved me on my project. I had most of the ideas figured out on my own, but a few little tips are gonna make it tops.

Hey Martyn !! awesome videos, they are really helpful!! after spraying the primer, do you do wet or dry sanding?

That was hardcore. You've earned a subscription from me.

That supreme video man, thanks.

Fantastic video, brilliantly presented. Loved it and can't wait to start my project.

I knew within the first 5 seconds this was gonna be gold.

1:55 Man I love your Humor!😂🤟🏻

The last two videos i watched on painting a bike.. two different people.. and I loved them both haha great stuff. I didnt even watch the bikes get painted I just listened

it’s gorgeous

Awesome work. Questions for you: 1) How would this process/materials differ for a steel bike frame; 2) What do you do to clean the frame between sanding and coats of paint to avoid debris from sticking to the frame. Thanks!

@ETOE

2 жыл бұрын

I lick it, just lick it!

@kevinsimbillo7951

2 жыл бұрын

@@ETOE seriously though, what do you use to clean it? Alcohol?

@ETOE

2 жыл бұрын

Serious! I lick it. But if you think use alcohol. But please send me pictures afterwards. I love that kind of stuff.

@kevinsimbillo7951

2 жыл бұрын

@@ETOE Help us out here. We really are a newbie thats why we ask questions like this. I myself not really sure what to use to clean it. Is water enough?

@Koen030NL

2 жыл бұрын

@@kevinsimbillo7951 He said it, use alcohol. Im gonna wash it down with water first and before every coat of paint make sure you degrease it, with alcohol preferably.

How long did it take for you to get what the logo really is hilarious 😂😂 great vid

@ETOE

4 жыл бұрын

5 seconds and supermeme came to my mind thinking about supreme hypebeasts.

@kevinmorales8449

4 жыл бұрын

ETOE whats the name of the spray can you used ?

@ETOE

4 жыл бұрын

@@kevinmorales8449 I call her Betzie.

@whatisjaspdoing

4 жыл бұрын

@@ETOE This ^^

@JohnS916

4 жыл бұрын

I know my sticker would go on cockeyed, he made mounting everything look so easy. Great video

You're a legend. Thank you!

Best diy bike paintjob tutorial out here!

First time I've seen one of your vids, very funny 😂😂

I'm waiting for him to say, "I'm here to pump *claps hands* YOU UP!"

this guy films all in 1 shot. that's what i call high quality

BEAUTIFUL !

Brilliant as usual! Could you do a video explaining how-to convert a Satin Matt black bike to glossy finish? I'd like to convert my Specialized Tarmac Pro disc 2019 (Matt Satin black) to a shiny finish without loosing my logos and maintaining my black color. Should I use 1000 sanding paper and then just apply 2K clear coat?

@retrobikechannel2599

4 жыл бұрын

yes , pretty much. just remember to degrease between

Great video! I wish you would have listed the drying times for each painting step. Also, won't the 2K clear coat harden in the can between the first layer and final layer if there's a day between those steps?

@ETOE

4 жыл бұрын

You have 48 hours to use the can.

@irishpotatogamer1850

2 жыл бұрын

@@ETOE thanks I was Wondering this too

Im impress and im also a big fans of watching ETOE painting , you the💪 man

Incredible and didactic work. Thank you.

Instead of using that kind of sandpaper, you should use 3D sandpaper. If you are going to prime the bike you don't have to sand it to P800 because you simply are wasting your time, you have to do it up to 320 if you want or 400 then prime it, and sand it again to P800, then paint it. And you forgot to do or to tell (if you did it behind camera), to degrease the surface, otherwise there could appear defects on the finished bike. Before putting the clear coat, you have to sand it, not after putting the clear coat. Clear coat just has the waves that it has under it. How do I know it? I paint cars. By the way, the result was so good, you did extra work but you got a nice result! Keep it up, and take those as suggestions not as bad comment :)

@TheLineSeeker

4 жыл бұрын

Do you sand the colour then with 800?

@BatisChannelYT

4 жыл бұрын

@@TheLineSeeker If you have used those flakes you do sand it just to avoid them to get out the surface. But if you don't use flakes you just sand the primer, then paint and then the clear coat. Colour is only sanded if you use flakes or if there are some mistakes on it that you have to solve before the last coat.

@jacobs-h398

4 жыл бұрын

At what point in the process do you degrease?

@BatisChannelYT

4 жыл бұрын

@@jacobs-h398 Before sanding you clean it just in case to remove particles that could scratch the surface. And once you sand you have to degrease because you will put primer on it. Then it depends on technique, if it is wet/wet you don't have to sand it to paint it, but if you have to sand because you use a different technique, then you have to degrease again.

This guy just melted every snowflake that clicked the video

love your work! 👌🏽

This is love at the first sight, this dude is awesome :)) Subscribed!

man it's no wonder paint jobs are so expensive. stainless steel for me from now on

What sandpaper gradation should I use if I want to leave raw carbon and make it very smooth without any scratches? You know, I prefer to ask a specialist and be sure what I will be doing.

@obi-wankenobi9871

4 жыл бұрын

Dont do that. Not all resins are UV resistant, you will need a clear coat to be safe.

@adrianm7593

4 жыл бұрын

@@obi-wankenobi9871Yes, I know.

@obi-wankenobi9871

4 жыл бұрын

Then just do as he said. 400 600 800

Awesome video. Dude is funny and knows his stuff.

That looks exausting... do you recommend the same process for other materials such as aluminum 7005? What about the paint? Should it be special for Aluminum?

@ETOE

4 жыл бұрын

You can use it on Aluminum if you pre prep the aluminum right. If not primers will peel of.

@Rudagger86

4 жыл бұрын

@@ETOE Do you have a video or any recommendations on how to properly prime aluminum? I was planning on sanding with 400 grit and then using the Spraymax 2k primer in this video. Is there an additional step I should be taking to get a proper result?

Maybe some DIY on aluminum frames thatdbe dope D: some of us can’t afford carbon yet ;(

Lucky for me I have a Beach cruiser so I don't have to worry about none of the holes. Thanks for the video it helped

Great video and excellent paint job. I'm about to do the same with my bike and this help me a lot.

my gf has steadier hands than I do so maybe she should be the one drilling the holes 🤔🤔🤔

@doranhosteen1751

4 жыл бұрын

I thought u where suppose to do that

i love this tutorial! nice job bro!

great video thank you. really detailed.

when you find out you're the girlfriend watching this video.....

Do you wash off any sanding dust prior to spraying the frame ? If so is their any technique because water tends to leave drops in inaccessible areas.. Thanks for all this information though

@ETOE

3 жыл бұрын

Yes I lick the dust off with my tongue.

@skdavey8

3 жыл бұрын

You can use a tack cloth to wipe it down, the same technique used in auto painting or woodwork

@trystuff9631

3 жыл бұрын

Just rinse with water and wipe with alcohol hahahaha

@timjohns3743

3 жыл бұрын

Do you mask up your tinge first?

@bleedingfly

3 жыл бұрын

@@timjohns3743 Shave it, dude.

looks good.very nice job.i'll be spray painting mine next week .hope it turns out as good as yours.

Lol so good!

Hi! How long did you let the first coat of primer dry before the second coat? also how long did you let the second of primer dry before applying the red one? And one more, what is the grit of the sand paper you used on the primer before applying the red one? I'm sorry I have lots of questions. Thank you so much!

@hmsinc.1645

3 жыл бұрын

Same questions here. @ETOE

You aren't drilling a hole in the frame when removing a rivet because a hole was already predrilled inorder to even install the rivet in the first place.

Great DIY! Great job! Great music!

Lol! This guy is awesome! subscribed.

What spray paint did you use like I'm trying to get the same what you got but make it black

@ETOE

4 жыл бұрын

OK I give up.

@alexw4570

4 жыл бұрын

ETOE 😂

@denisesportiello1858

4 жыл бұрын

Dude that's really rude just let the pore guy do his thing like nobody cares if it's called Etoe like shut up

@motoarch

4 жыл бұрын

@@denisesportiello1858 did you not watch the video?

@ozzy3933

4 жыл бұрын

@@denisesportiello1858 never knew people could still function with 2 brain cells, life's full of surprises.

Why is he so salty? I’m just trying To Make my Bike look good

Awesome bro!

Watched this one a few times and I always love it

Did anybody noticed that his T-shirt's brand is SUPERMEME and not SUPREME

@MegaDavedavedavedave

3 жыл бұрын

Is the joke going over your head, or is the joke going over your head the joke which is going over my head?

You cheater... you didn't buy those stickers... you cut them in your own lab on the cutter - didn't you...

KZread needs more like you 👏

Awesome video dude.... thanks for posting it.

Loved it. You made it look easy and you loved it. Great :)