1 worked as a spray painter for many years. Having recently retired I enjoy keeping up with things and really enjoy your longer video content. Please keep them coming Dave and best wishes with your spray-painting journey

Came via Mighty Car Mods, to see if you're so sweaty all the time, was relieved and also immediately subbed!

@savagegtalks5912

2 ай бұрын

Same and subbed. Wish I'd know back when lol

Showing the whole process is very helpful. Thank you.

Great video, thanks for explaining every process!

Hi Dave, I have been watching your informative videos for years and just wanted to let you know that I really enjoy watching them! Greetings from Europe - Netherlands. Frank😊👍

Good to see you back

Cheers Dave, you're a legend 👍

Dave, I have been watching you for years from Canada. Thank you for all your videos. Cheers 🍁

@Joseph-mm4zu

2 ай бұрын

I've been watching you for a couple of weeks now. You know Tommy right? He's about 4ft tall with a load of wirey sh** up top

What a guy exactly was I looking for thank you

I did my kombi with a little beaver came up a treat for a 80’s model spray kit.

Great content - really glad to see you NOT using 2K with hardener option as most of us DIY don’t have the safety equipment or booths to spray it, plus it’s very risky regardless. Great camera presence too! Love it

@mehmeh5471

2 ай бұрын

Hardly risky if done correctly, he didnt spray it in a booth and only had a standard respirator. Notice you didnt comment on those issues, are you a 1k sales rep?

So good man. Thank you.❤

VG my new favourite paint store.

Great video!

Love from the MCM fan base❤

Glad to see another video! I was just thinking watching it, you need to get involved with MCM and watching an MCM video, who appears….

Good job Dave

It wouldve been nice to see you use a 2k clearcoat on the can side to even up the comparison,its a complete game changers for spray can jobs

Nice work

Came from MCM 😅 Nice content Dave

Dave, could you do a video on wet sanding for paint correcion please?

Hey mate, the shop microphone audio is only coming out of the left earpiece. Music is coming out of both. Not sure if it’s too late to fix this, but it’s quite annoying ahahaha

@customspraymods

2 ай бұрын

Sorry mate.

Great informative video. I think Sagola sent those guns to everyone with a youtube channel lol.

A1 my question is what Dust Extraction for a DA would suit me at home DIY in a Garage as there are so many would like to purchase one that will last and do the job.

The spray gun is super impressive in that it places less strain on the hands, is faster & straight off the gun was glossy without the time spent buffing/polishing. 👍🇦🇺👍

Great video, fair to say I’m a convert from cans to gun now. What’s a good entry level spray gun you’d recommend?

To be fair on the people who guessed which was the gun panel, you didn't tell them you had only cut and buffed the spray can panel (or did you of camera)

BRILLIANT JOB DAVE HOWS MARIO THE PAINTER CRACKING BLOKE HIM GOOD JOB DAVE VERY WELL EXPLAINED THANKS FOR SHARING THAT INFORMATION 👍

Dave my dude, your audio is split. Talking only in left channel headphone and music in both. Just thought I would let you know for next video ;) Great video by the way I had always wondered how much difference there was between the two methods. Although I suppose a lot comes down to how skilled and how well you can prep 😅

Hey dave could you do a comparison for 2k clear out the gun vs a 2k clear out the can please 🙏🏻

@customspraymods

2 ай бұрын

Hey mate try this video. kzread.info/dash/bejne/pKKTrJp8gafId6w.htmlsi=2GFaYz_cAxQ9YTWb

great video! Question, if budget is an issue, what's would you recommend? (a) Painting with a small compressor and a cheap gun (e.g. 6 gallon vevor & R500 LVLP spray gun), (b) Painting with a mid-range turbine system (e.g. HVLP spray systems- AVANTI 3 Stage HVLP Paint Sprayer or Fuji Spray 2203G Semi-PRO 2 - Gravity HVLP Spray System) (c) Painting with spray cans

@customspraymods

2 ай бұрын

I'd say A would be a great option. You can always find a dead compressor and link it up to use the tank for a longer spray cycle.

Nice work Dave but i reckon if you had used a slightly darker colour, it would have been easier to see the difference

12:55h are you spraying in the direction of this heat panel things? And I'm always worried I'll blow myself up when using an industrial fan to blow the paint fumes out of the garage because it's not intended for the use in explosive environments. 😅

@customspraymods

2 ай бұрын

Hey yeah I am but it's turned off. Also the booth is sucking behind me as to minimise dust on the job. So not much over spray goes on the heater. 👍👍

I have an 89 Celica with a plastic rear bumper filled with styrofoam. Do you have a relevant video showing how to repair and spray the crazed surface and missing chunks ! cheers from NZ

@customspraymods

Ай бұрын

Hey mate. Plastic is hard as paint stripper isn't recommended you would want to sand it back to under the damage and prime and paint again. Hope this helps.

@davidkirk6249

Ай бұрын

@@customspraymods that's great thank you.

MCM sent me here

Like yur content. Subsribed

Hi Dave. Why do pro painters pulse the trigger at the end of each run? Why don't you reverse direction off panel and come back onto the panel?

@customspraymods

2 ай бұрын

Hey it possibly to save a bit of paint and minimise over spray. Reversing would be to get even coverage on edges. 👍

I never had the money for, or access to the equipment and materials to properly spray paint until recently. So most of my life I've done everything with a spray can. I've gotten good results because I've had a lot of practice. They make handles to snap on the cans to make it less tiresome and painful to do a lot of painting. But it's still nowhere near as easy as using a spray gun. You can get good or bad results with either. It just depends on how you prep things and how much practice you've had with your technique

Why didn’t you use a 2k clear in a can for a better comparison?

@customspraymods

2 ай бұрын

I have done that a while ago. I wanted the price and the safety aspects of the 1k cans to be on display so it's more in reach of a DIY guy. 👍

How many coats of clear with the can?

@customspraymods

2 ай бұрын

4 coats. 👍

@geoffcarlton4047

2 ай бұрын

@@customspraymods thanks, I'm going to attempt a front bumper respray based on this video 😁

🔊👊🏻

Hilux guard is the spray gun while the Hilux guard is the spray cans. 😂

Any concerns of overspray or cross contamination painting them right next to each other like that? Edit: I guess that was for the primer only ….

@customspraymods

2 ай бұрын

Yeah primer is sanded an anyway. Clear would be a problem

Bro your audio settings in the video are out…. LHS only. The voiceover is fine.

2questions….why not use 2k clear in a can …….and how many cans did you end up using?👍🏻

@customspraymods

2 ай бұрын

I have done that a while ago. I wanted the price and the safety aspects of the 1k cans to be on display so it's more in reach of a DIY guy. 👍 Amount was Half a can of primer full can of colour half a can of clear Hope this helps.

@kevmak2600

2 ай бұрын

@@customspraymods awesome thanks for the reply…

Cost a lot more using spray cans of course you can get better Tips they are over 5 to 6 dollars each just not worth it.Question your Dust Extraction machine for DA Sanders as you have the big unit there which one could you say would be good for a DIY person please that will do the job and more.

I feel, spray gun is harder to begin, easier to master. Spray can is easier to begin, harder to master. Obviously both are still bloody hard to begin!

👈👉 🍻

I can spray better and more consistently with a can than a gun, but use your finger not you thumb on the button please

Just sprayed a oil pan with rattle can. Spray gun all the way. Dudes getting Ripped