Spray and Backroll with the Pros - Interior Painting

Тәжірибелік нұсқаулар және стиль

Hi There! Here's a brief spraying and back-rolling Tutorial/Instructional video I was able to put together and share with anyone interested in the process for interior walls.
As you all should know, in the building trades and many occupations.... people have different ways of doing tasks... what I show in this video, is just how we happened to accomplish the task, that particular day. Many painters accomplish it differently, including us sometimes. I do have my favorite rolling technique and my preferences on spray technique. Other people are free to paint as they choose, so please keep comments civil and respectful.
Today's interior job is applying low sheen paint (Edgecomb Grey) to the walls on this new construction home. The texture is "orange peel" texture and has been primed already with tinted primer.
I prefer to use a 621 spray tip since it will put paint on faster, so the sprayer's job is easier and the back-roller won't have to wait as the paint is being applied.
Starting out is where some people stumble... you should pre-wet
the 18 inch roller to the core before you start spraying, and make sure that enough paint is being applied from the very start. After a few walls or a room, the sprayer and backroller will have adjusted to make the process work well.
I don't talk about roller brands, or equipment brands, simply because it isn't relevant to learning this process. Sure it's important to use a quality roller cover (ask your local paint store if in doubt), and the size nap is important. 3/4" for orange peel and thicker texures, 1/2", 9/16", or 3/8" nap for small texuture, and smoothwall surfaces.
It's also important to use a pump that will put out enough paint to use a 619, or 621 tip, roughly .6 - .7 gallons per minute or more.
Some tips. work as a team, of course. The spray guy should have experience in this field, or learn really fast about spray techniques and how much paint to apply.
When in doubt, hire a professional painter. Paint sprayers SHOULD NOT be used by anyone that doesn't FULLY understand the operation instructions and procedures, and the RISK OF INJURY to themselves and others.
PAINT SPRAYERS OPERATE AT UPWARDS OF 3000 psi for this type of work and can cause paint injection into the skin, leading to severe damage and emergency surgery TO CLEAN OUT PAINT FROM THE BLOODSTREAM AND BODY.
I make videos to teach people who want to learn, but also, I do it to represent Residential House Painters and show what we do in our profession. To show clients, and others, how much work goes into completing full home paint jobs. (and I don't show ALL the work of course).
* Jobsite Safety Disclaimer*
XC Painter will not be held liable for any individual's safety incompliance or any damage, accidents or incidents that have occurred on a renovation project due to anyone's or any entities actions or lack of precaution.
Each and every individual accepts that they MUST be aware of JOB site Hazards and MUST adhere to their local regulations for their jobsites.
Any footage shown or content given herein does not represent Jobsite safety training as I am just doing my best to inform people of some of the DANGERS involved.
Anyone working on home renovation or on a job site is REQUIRED to understand the necessary safety precautions and the DANGERS of working with tools/equipment/fall protection and working with other workers as well.
Personal Safety is the responsibility of all individuals working around each other.
** Please use all applicable PPE (personal protective equipment), including but no limited to: Hard hats, Eye protection, Gloves, Steel toe work boots, Hearing protection, Face shields, Respiratory Protection (Respirator!!), Fall protection, Harnesses, and others when performing job tasks.
THANK YOU so much for supporting me while I keep doing my thing painting and creating painting content for others to see. Sharing my work online has been a GREAT outlet for my day to day grind, and it helps many better understand the painting and decorating trade.

Пікірлер: 102

  • @mikeewart7490
    @mikeewart7490 Жыл бұрын

    Omg. Finally some guys who know how to paint, people think I’m nuts when it tell them I have to spray the ceiling last, not paint it first 🤦‍♂️ Nice work guys 👍🏻 If I hire someone to paint and they paint the ceiling first I pay them for that and send them home lol.

  • @xboss-5704

    @xboss-5704

    Жыл бұрын

    You are clueless lmfao

  • @camrycowan9429

    @camrycowan9429

    11 ай бұрын

    What's the reasoning for painting the ceiling last? I'm a super novice.

  • @sameurrahman-kr3wb

    @sameurrahman-kr3wb

    9 ай бұрын

    ​@@camrycowan9429for me painting ceiling last just makes sense😂

  • @DEK981967
    @DEK9819675 жыл бұрын

    Great job XC ! 2 men working together is the way to go when spraying ! So much faster ! I wish I could find a good helper that I could hire and put on the books . Im really getting tired of doing this by myself at 52 years old.

  • @Shadow-nk9gs

    @Shadow-nk9gs

    4 жыл бұрын

    D.E.K. Outdoors Hey if your around the Pittsburgh area... 👈 I’m your gal to help.

  • @gianthills

    @gianthills

    Жыл бұрын

    You still looking? Where are you?

  • @DEK981967

    @DEK981967

    Жыл бұрын

    @@gianthills I switched careers last year.

  • @gianthills

    @gianthills

    Жыл бұрын

    @@DEK981967 ok. Me too. Lol

  • @slicktype001
    @slicktype0015 жыл бұрын

    Production at its finest 👊

  • @davidbahr9068
    @davidbahr90684 жыл бұрын

    I'm going to try this method. Ive always sprayed the ceilings first then made ann extra wide cut in with a roller before I shoot the walls. This is good shit guys 👌

  • @Nina-tn1xs
    @Nina-tn1xs3 жыл бұрын

    Thank you!! The tips helped me out alot.

  • @orbitalforest
    @orbitalforest5 жыл бұрын

    Nice vid bud.👍

  • @Darrin95
    @Darrin959 ай бұрын

    You can always tell when someone is a professional painter or not and I know you guys are a professional painters because any professional painter know that you should spray the wall to get the paint on the wall they come behind and back Roll the wall. Most people think of spraygun is the only thing that you should use but that is Farthest from the truth the spray gun just put paint on the wall back rolling does the job you guys made an awesome video thanks

  • @JohnMartin-oh6bf

    @JohnMartin-oh6bf

    6 ай бұрын

    The sprayer is an applicator…the roller is the finisher.

  • @TheMendo123

    @TheMendo123

    3 ай бұрын

    So as a one man job, not really practical?

  • @JohnMartin-oh6bf

    @JohnMartin-oh6bf

    3 ай бұрын

    @@TheMendo123 it is…cuts away the tiring effect of Labour. Masking isn’t labour intensive but dipping roller in and out of trays is.

  • @TheMendo123

    @TheMendo123

    3 ай бұрын

    @@JohnMartin-oh6bf I'm confused, so you are advocating for the use of a roller or not?

  • @JohnMartin-oh6bf

    @JohnMartin-oh6bf

    3 ай бұрын

    @@TheMendo123 not really. Each one has its pros and cons.

  • @LUckybones25
    @LUckybones255 жыл бұрын

    Another great video from the best painter on youtube!

  • @johnclogan7908
    @johnclogan7908 Жыл бұрын

    verry goood

  • @waggstaff91
    @waggstaff91 Жыл бұрын

    How do you go on back rolling the ceilings with the overspray going on the edges of the walls, won't it show a different finish

  • @ChuckFin321
    @ChuckFin321 Жыл бұрын

    Thanks for the vid! I'm Priming and painting a 3bedroom this week for the first time using a sprayer. Its a reno so half of it is new drywall. I plan on spray priming all the walls and ceilings first, does that need to be backrolled? Then it looks like spray the wall top coat first then tape it off with plastic then top coat the ceilings? I'm installing wood trim afterwards so don't have to worry about taping that off.

  • @mikeewart7490

    @mikeewart7490

    Жыл бұрын

    I would always suggest to back roll to catch sags and fill thin spots

  • @wesleyharden5076

    @wesleyharden5076

    Жыл бұрын

    It’s always recommended to backroll especially the 1st coat/primer it works into the drywall more efficiently and you get better adhesion. Always backroll drywall and sand in between coats ALWAYS!!

  • @Cigarprop
    @Cigarprop4 жыл бұрын

    I have to Prime and paint a 400 square-foot addition that I just put on my house, do you recommend backrolling on the primer coat?

  • @XCPainter

    @XCPainter

    4 жыл бұрын

    It's not a bad idea to do that, especially if you are priming over a drywall texture.

  • @Cigarprop

    @Cigarprop

    4 жыл бұрын

    @@XCPainter thank you!

  • @robbielibby4112

    @robbielibby4112

    3 жыл бұрын

    Always backroll primer and finish coats

  • @soundtrap1812
    @soundtrap1812 Жыл бұрын

    Hi I do new construction in the UK. I've been spraying walls to a finish but I'm now on a site that wants them back rolled. My question is when your doing this alone would you just spray one room at a time and roll? Or will it dry too quick?

  • @XCPainter

    @XCPainter

    Жыл бұрын

    For our substrates (new drywall mud/tape, even primed) it tends to dry in super fast, so I have a hard time backrolling a big wall or ceiling sections properly. Can do it, but it's like going through the motions, but not effective though. If your surfaces hold out the product better, or it just stays wet longer, you can do one wall at a time or maybe half of one

  • @UGotTheFunk
    @UGotTheFunk8 ай бұрын

    So, serious question....what is the advantage of spraying, if you have to roll it anyway?

  • @XCPainter

    @XCPainter

    8 ай бұрын

    The advantage of spraying can be situational... so in the case of new construction spec homes, and with orange peel texture, it is so much easier, effective and efficient to spray the paint on and backroll instead of manually brushing or rolling every corner, bottom and top of wall, dipping hundreds of times considering the massive amount of drywall area and coats of products needed. We can spray out this interior in 5 - 6 man hours max... if we brushed and rolled this 3 story home requiring 2 coats, it would take 40 plus man hours

  • @wolololer

    @wolololer

    2 ай бұрын

    @@XCPainter So the advantage is just doing the corners faster? I could be wrong, but I feel like i could paint just as fast with 2 man brushing and rolling on a regular 4 corner walls room, it would be cleaner, healthier cause no pray in the air, require less prep work and less cleaning of the tools after process. I allways thought just spraying would be enough, if u include a second man for the backroll, it starts to look inefective to me

  • @RJ-cr1vn
    @RJ-cr1vn4 жыл бұрын

    Would you backroll a ship-lap wall? I just purchased a sprayer to make painting our dining room ship-lap quicker... But I've seen a few video's talking about backrolling.

  • @XCPainter

    @XCPainter

    4 жыл бұрын

    Hi, short answer is it's certainly possible to do a nice spray finish without backrolling. It all depends on how smooth your surface or existing coatings are, what results you are looking for, and if you are able to spray a nice finish. An example: if you have to prime over raw wood, a backroll with a 1/4" × 6" mini roller would help to work primer into the wood and roll it even. . but with topcoats I'd probably just spray with a 308 or 410FF tip

  • @terilachonce280
    @terilachonce2802 жыл бұрын

    Kind of confused why you’d do ceilings last. Especially if it’s colored walls, not why, it leaves a fog of ceiling paint on the walls. Please explain your thoughts. Thanks!

  • @XCPainter

    @XCPainter

    2 жыл бұрын

    We sometimes paint the ceilings last when we're addressing many ceilings or rooms because we can spray them. Also it changes the process in new construction homes so we can spray and roll walls very easily, then mask and spray ceilings. If we paint ceilings first...we would most likely be left to brush and roll all the walls, cutting in the ceilings. That requires two full coats of paint, and on an empty new construction home, particularly a spec home, that takes entirely way too much time, effort, and paint. Masking and spraying ceilings also gives incredible paint lines if you mask well. The plastic should reach the floor so no ceiling paint gets on the walls.

  • @keithtaylor5515
    @keithtaylor5515 Жыл бұрын

    So back rolling is to push the paint into small cracks and pin holes?? if you thinned out your water based paints so it wasnt so thick wouldnt this help getting paint into pin holes and no need to back roll? just curious as im about to buy a sprayer and do some renos,

  • @wesleyharden5076

    @wesleyharden5076

    Жыл бұрын

    Rub your hand across a wall with new finished drywall. The joint compound is very smooth the Sheetrock has an almost fuzzy like Texture on it. It’s 2 different textures when you backroll you create 1 consistent texture and that’s what backrolling does is create a uniform finish

  • @barstow611
    @barstow6118 ай бұрын

    Curious with this method do you have to put a second coat on? Or does the backrolling do the job?

  • @XCPainter

    @XCPainter

    8 ай бұрын

    2 coats is recommended, I always strive for best practices as a solo painter/business owner... (in these videos I worked as an employee, builder only goes with 1 topcoat) but realistically in some spec home situations only 1 coat is budgeted for money and time wise. In these houses with beige walls "Edgecomb grey" we tinted the primer to that, did 1 solid wet top coat, backrolled and sometimes fog coat after, sometimes not, they always turn out well, with Flat sheen paint and even low lustre.

  • @Richard-ob5zn
    @Richard-ob5zn3 жыл бұрын

    What's the large tank for, is it air, and how does it work? Never have seen something like this.

  • @XCPainter

    @XCPainter

    3 жыл бұрын

    The white tank is just propane for the general contractor's heaters. We turn them on after we finished spraying.

  • @fulltang1
    @fulltang15 жыл бұрын

    Can you do a quick tutorial on cutting in ceilings?

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    I can try to make one of those sometime, thank you!

  • @Tedrins
    @Tedrins5 жыл бұрын

    Is this how you guys do new housing? Is that the final wall coat? I assume you then mask off the walls and spray the ceilings. Final step is to spray the trim pack when it is hung? Don't the carpenters scratch up the walls? I was wondering why you taped the walls (and creasing the paper) to spray the trim. I'm guessing that the walls are finished at that stage. Also, don't the floor guys, electricians and carpet guys scratch up the walls & ceilings? The electricians always make marks when putting in pot lights. The carpet guys lay the carpet on the wall and then cut it. The floor guys always get fast set or something on the walls.

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    Yes this is the final coat besides touch ups. The other trades aren't too bad on the walls except for making dust inside. Walls are cleaned and touched up as needed by the builder's employee. We only fix what we are responsible for.

  • @terilachonce280

    @terilachonce280

    2 жыл бұрын

    Ummmm. Ceilings, then trim, walls last.

  • @XCPainter

    @XCPainter

    2 жыл бұрын

    @@terilachonce280 not in these homes

  • @chancenebeker4481

    @chancenebeker4481

    2 жыл бұрын

    @@terilachonce280 most new track builders dont want to pay the painters shit contracts go to cheapest bidder. so this is how they paint them

  • @arinb12
    @arinb12 Жыл бұрын

    If you spray and don't backroll how do you touch up later and get the same finish if spraying isnt an option due to furniture etc?

  • @XCPainter

    @XCPainter

    Жыл бұрын

    Touch up is still possible depending on the surface, which paint, which sheen, paint age, and client expectations. Orange peel texture is common in the northwest US and is a little more forgiving than smoothwall

  • @XCPainter

    @XCPainter

    Жыл бұрын

    I use a mini roller with only a little paint, and feather out the touch up area edges

  • @WordAboveAll
    @WordAboveAll5 жыл бұрын

    Is the ceiling same color as walls or are you going to tape off the walls then spray ceilings? Thanks.

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    The ceilings are going White Dove in color. We masked off all the walls next and sprayed the ceilings.

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    My next video will show the wall masking going up and some ceiling spray footage 👍.

  • @joemama-kx6rk

    @joemama-kx6rk

    5 жыл бұрын

    You boys do it different... I spray ceilings , cut in ceilings, and 18" the walls. Less materials wasted and prep time .

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    That's cool man. Thanks, we've done it that way plenty of times too, but more commonly on custom homes or basically jobs where they want the walls painted afterwards. So you say materials wasted? I'd rather spray out and backroll 25 gallons of paint in one good coat instead of cutting and rolling two coats on a 3000 sq ft new construction spec. That new drywall/primer just sucks up the paint still so... spec home, we spray 👍

  • @joemama-kx6rk

    @joemama-kx6rk

    5 жыл бұрын

    @@XCPainter doesnt it take you guys a while to tape plastic on the walls? Maybe a day or two for 2 guys? At 25$ to 30$ hr a piece for 2 guys 2 days plus the cost of frog tape and plastic, I'd expect one guy to cut the entire house in one day two coats without trim

  • @6thDAY
    @6thDAY8 ай бұрын

    Just curious but why would someone spray and backroll when they can just roll initially? It would seem less work with masking to just roll 2 coats. Does it leave less stipple with the spray or something?

  • @XCPainter

    @XCPainter

    8 ай бұрын

    Thanks for asking. To spray or not to spray can be situational, with the amount of area to cover, allowable timeframe for the work, and of course, the logistics of different methods and how they turn out. These homes are 3 story new construction spec homes, with orange peel texture drywall. That would require a whole lot of cutting and rolling, lots of paint going on 3 floors, and double that with 2 coats. Also, spray priming before and after texture makes for even more work, but it's feasible with spraying The spray production method (in this situation) is just so much faster, easier, effective. We masked, sprayed and rolled topcoat on walls in this home in 2.5 hours. Next day, masked walls and sprayed ceilings 2 coats in a day or 2.

  • @danielohirsch
    @danielohirsch5 жыл бұрын

    Will backrolling cause stippling on a smooth surface?

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    Backrolling can leave stippling on smooth walls, but you can also minimize it by not applying too much product, or by using a microfiber roller. If the amount of product sprayed is just right, and roller technique was done correct, there shouldn't be any visible problems. Side note, if I see roller stipple on surfaces, inside or outside, it isn't a bad thing as long as it looks even and consistent.

  • @danielohirsch

    @danielohirsch

    5 жыл бұрын

    @@XCPainter I was planning doing a super smooth level 5 on my walls prior to paint - and would love to avoid even roller stippling... do you have to backroll on a smooth surface?

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    @@danielohirsch if you are good at spraying real even and know it could take appropriate steps to achieve that level 5

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    @@danielohirsch After you mudding and leveling coats are done, you'll want the best appropriate primer, either high build or just something that sands easy, then you'll have to address more prep work on walls and full sand possibly. Then 2nd coat of primer. Then you can spray topcoats.

  • @danielohirsch

    @danielohirsch

    5 жыл бұрын

    @@XCPainter Thanks!

  • @carlos-uj3qg
    @carlos-uj3qg5 жыл бұрын

    What did you use the gas tank for?

  • @maximuspareo

    @maximuspareo

    2 жыл бұрын

    Is it gas tank ??

  • @JP-yd4yl
    @JP-yd4yl3 жыл бұрын

    What size nap were you using?

  • @XCPainter

    @XCPainter

    3 жыл бұрын

    I think this is a 18 × 3/4" since it's new orange peel texture

  • @rowdybroomstick1216
    @rowdybroomstick12165 жыл бұрын

    This seems to be an ongoing issue that no one ever agrees on , should you spray one heavy coat and back roll or cut in and roll the whole thing, seems there should be some sortive way to determine which is better, but I don't know the answer. my opinion I think the physical strength and stamina it takes to spray is considerably less than carrying an 18 inch roller loaded up with heavy paint all day, and although he did use a roller to back roll for the needed finish it's not quite that heavy being used in that way so the speed is there! Pretty sure I couldn't roll and cut in a 3000 sq ft house in 8 hours with a helper🤔

  • @ricosrealm

    @ricosrealm

    11 ай бұрын

    much faster for sure.

  • @nrehberg
    @nrehberg4 жыл бұрын

    Why the 3/4 nap? Wouldn’t 1/2 be sufficient?

  • @XCPainter

    @XCPainter

    4 жыл бұрын

    We prefer a 3/4" on orange peel texture to carry the paint from top to bottom and carry the paint across the walls. 1/2" is not really effective enough

  • @jimw6991

    @jimw6991

    Жыл бұрын

    ​@@XCPainter What brand of roller did you use? I would like to try this process both to speed things up as well as achieve even coverage. Looked like you have minimal overlap and just go up and down a section of the wall once then move over. Nice job, I got just as much reading comments as watching the video.

  • @XCPainter

    @XCPainter

    Жыл бұрын

    @@jimw6991 the roller might have been a Wooster Super Fab, 3/4" .

  • @XCPainter

    @XCPainter

    Жыл бұрын

    @@jimw6991 my up stroke goes back a little bit a down stroke goes straight down, then move over. There's a decent amount of overlap which can help with consistency

  • @pearlperlitavenegas2023
    @pearlperlitavenegas2023 Жыл бұрын

    Hi What's the reason for rolling after the spray? Thx

  • @ricosrealm

    @ricosrealm

    11 ай бұрын

    even out the paint after spraying

  • @stevenmcfarlane8831
    @stevenmcfarlane88315 жыл бұрын

    Would the inline Graco gun and jet roller not cut down on labour and time ?

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    I'd love to give it a try but I know there are certain things that don't go as smooth... like can you spray all the way down to the floor and up to ceiling with ease or do you have to take separate passes for those? I don't know how much time you could save. It only took us 2 hours or less to spray out this three-story, 3000 square foot house.

  • @josephnieves6718
    @josephnieves67185 жыл бұрын

    What kind of sprayer?

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    Using a smaller one that day, a Graco 395 PC Pro

  • @joshyjosh00
    @joshyjosh003 жыл бұрын

    Why backroll ? What is the purpose behind it ?

  • @XCPainter

    @XCPainter

    3 жыл бұрын

    For the purposes of this job (new construction), with an orange peel texture on all surfaces... it's quite porous, so it's beneficial to work the paint into the texture and move the paint across the wall top to bottom. Of course this improves the consistency of the paint sheen and finish also.

  • @1painter4hire
    @1painter4hire4 жыл бұрын

    Are Your walls textured ?

  • @XCPainter

    @XCPainter

    4 жыл бұрын

    Yes, orange peel texture

  • @arsenalx626x6
    @arsenalx626x65 жыл бұрын

    No. Your boss should have started on the left and worked his way to the right until the whole room was done. Great video tho and good tips👍🏽

  • @XCPainter

    @XCPainter

    5 жыл бұрын

    Well you're right but that's okay. He does spray from right to left usually, and sprays different than I do. Heck does a lot of stuff different but it's all good.

  • @terilachonce280

    @terilachonce280

    2 жыл бұрын

    Left to right, right to left. What’s the difference as long as the roller is following behind. Lol

  • @williammead9966
    @williammead99662 жыл бұрын

    To me, the whole purpose for spraying is so I DON'T have to use a roller or brush.

  • @terilachonce280

    @terilachonce280

    2 жыл бұрын

    You need to back till to work the painting into the walls.

Келесі