Thanks for the tip man! Couldn’t find much information about how to do it, thanks for the vid 🤙🏼

@PatrickRiggs33

Ай бұрын

Glad it helped!

I've done it like this for 20 years. Best method imo 👍👍

That really is a clean looking quad.

🤯🤯... I'll never eye ball it again lol thanks man that's a slick trick!

Thanks man saved me a lot of time

Nice job. This is the way that I do it.

@greenrancher350

3 жыл бұрын

Same here.👍

Patrick that was Perfect man thanks!! Love the content as always.

@PatrickRiggs33

3 жыл бұрын

Thanks Joe!

@lucabruno1270

Жыл бұрын

@@PatrickRiggs33 Hey I could really use some help, I have a Suzuki LTZ-400 2012 model and it dosent seem to have tie rod nuts. I'm really confused and would appreciate any help you can give.

@PatrickRiggs33

Жыл бұрын

@@lucabruno1270 I'm not really sure how to help you with that. It sounds like you need to order some new tierod end nuts. If you order new tie rod ends it should come with the jam nuts.

@lucabruno1270

Жыл бұрын

@@PatrickRiggs33 Thank you for responding, so it turns out that the nuts welded themselves onto the tie rod over time and that's why they wouldn't twist off.

@PatrickRiggs33

Жыл бұрын

@@lucabruno1270 Time for some propane/mapp gas.

Great explainations 👍

You are the best 👌

Those are def some good tips on doing an alignment. Thanks Patrick ! Also who do I get in touch with about getting f the ltr swinger conversion kit ?

@PatrickRiggs33

3 жыл бұрын

Yes Sir! Hit up Wes Turner on the LTZ400 FB Page

Pat, where did you get the gray 250R graphic on your bike? Looks great!

@PatrickRiggs33

3 жыл бұрын

Thanks man! Bruce Aleman at Blue Line Graphics. Awesome dude!! Look up his FB Page

The extra 1/8" of toe from lonestar is prolly to retain front end trackability to keep from wandering while under hard acceleration where the front tires are barely putting pressure on ground. So this extra 1/8" toe will function the same as if there is normal pressure on front tires at the normal 1/8" toe but not under hard acceleration. So hard accelerating is better with 1/4" toe. Normal cruising or just high speed riding without hard acceration from corner to corner sprinting around on a track would work good at 1/8" toe

@PatrickRiggs33

3 жыл бұрын

Great info! I suspect you are probably right on that. For whatever reason down here in FL every quad that I setup people are very happy with the 1/8" toe in and we ride fairly aggressively skimming over whoops, etc...

@Floridawoodsbanshee

2 жыл бұрын

@@PatrickRiggs33 I initially set my toe at 1/4. for Croom and ocala it was to much. I'm at 1/8 as well. Works well berm to berm and skipping across the woops.

I have an '08 LTZ 400 limited edition it has a slight pull to the right I put new tires on it but still has that slight pull to the right I measured tire circumference equally perfect match front and rear with equal tire psi ...I swap tire from left side to the right still has a slight pull to the right I towed the right wheel in 10 mm and added + 2 lb of air to the right front and rear tires and on asphalt and steeper crowns it's still pull slightly to the right but it did help a lot I measured the distance of the axles front and rear on both sides the right side comes out 20 mm shorter than the left side in the right rear the tire is 20 mm closer to the mudguard then the left side and the rear sprocket rides toward the right on the front leading edge in the chain .. so I'm guessing at least it looks like the carrier bearing is not true squared in the swing arm and I don't know of any way of adjusting the tracking on the rear other than to modify the swing arm or the the bolts in order to add enough play to compensate for adjustment which I'm hesitant to do

@PatrickRiggs33

11 ай бұрын

Yep, sounds like the stock swingarm adjustment holes are slightly ovaled out. That will cause the rear carrier to be biased toward one side. Live with it, fix it, or upgrade the swingarm.

Tried this yesterday on my raptor 700. On one side I got a measurement of 1inch and something, don't remember exactly. Went to other side of the quad and got 7/8 of an inch. Am I doing something wrong.

@PatrickRiggs33

2 жыл бұрын

Nope, sounds about right. They can be off like that. They aren't Porsche/Mercedes quality precision.

Whats the name of the swingarm? Is that a houser?

@PatrickRiggs33

2 жыл бұрын

In this video its actually a stock LTR Swingarm 👍

Donde puedo conseguir ese swing arm para mi z400 gracias

@PatrickRiggs33

Жыл бұрын

Compre usado de un LTR450 Partout o compre nuevo de Lonestar Racing o Fireball Racing

what is your swingarm? nice quad :D

@PatrickRiggs33

2 жыл бұрын

Thx! In this video its an LTR450 swingarm. I later changed it to a Houser swingarm for an LTZ.

@andrepinto96

2 жыл бұрын

@@PatrickRiggs33 im from portugal and i have some troubles with oem ltz swing arm. i cant find any houser or roll design there to buy. the ltr swing arm approves?

@PatrickRiggs33

2 жыл бұрын

@@andrepinto96 Yes it will, you need a couple bushings and spacers to make it work but it does work.

@andrepinto96

2 жыл бұрын

@@PatrickRiggs33 only that? you dont need the hub to make it work? what pieces do you need of the ltr to make the conversion?

@PatrickRiggs33

2 жыл бұрын

@@andrepinto96 I have a video on it if you search

What size tires are those Kenda’s?

@PatrickRiggs33

Жыл бұрын

18" Rear/ 20" Front.

@traviscannoles6361

Жыл бұрын

@@PatrickRiggs33 nice they look grippy as hell!

What rims are those bro ?

@PatrickRiggs33

2 жыл бұрын

Alba Beadlocks

Hey Dude, is switching over to the LTR swinger a pain in the butt? What does it entail, parts etc.?

@PatrickRiggs33

10 ай бұрын

No, not really a pain in the butt. To put it simply, everything from the Swingarm pivot backwards becomes LTR except for the rear shock, that stays LTZ. If cost is an issue go LTR, if you want to do it 100% right get an aftermarket LTZ swingarm from Lonestar or Fireball.

@timdejoris6604

10 ай бұрын

@@PatrickRiggs33 thanks dude, I have an LTZ on the jack in the garage fresh out of powder coat. Price is becoming an issue because I can’t stop buying shit for it!

@timdejoris6604

10 ай бұрын

@@PatrickRiggs33 can you recommend anyone for porting polishing? I’m in Jacksonville, you know anyone in Florida?

Is that a croom sticker ?

@PatrickRiggs33

Жыл бұрын

Indeed it is

@jasonforbes5113

Жыл бұрын

@@PatrickRiggs33 nice I am 30 mins from croom

@PatrickRiggs33

Жыл бұрын

@@jasonforbes5113 Sweet!

It's not covered I h CV e searched relentlessly and a month or so later your video come upon me so naturally I am quite interested I have 12 yfz450 and am close but am not there yet

@PatrickRiggs33

Жыл бұрын

Good luck.

ابعت الصور كلها والعنوان بتاعك ابعته

@starsixtyseven195

7 ай бұрын

Hahahahah sand