Sorry for the long delay on responding, I really don't get on here very often. The jig I made out of this around my garage, the main barrel is a 6" long piece of steel pipe, I cut the threaded ends off. The case can be anything solid metal, a piece of flat steel is fine. Used a 3/4" hexhead bolt, used a 1 1/2" flat washer on top, put the bolt through pipe, another flat washer, through base then a lock washer and self locking nut, then about 1/4" away drill another hole for a 1/2" bolt and threaded base plate, put bolt in leaving about 2 inches tall and cut bolt off and used vinyl tubing to protect silverware, then I just use the nut on bottom in vise to hold.
@patwinter2659
4 жыл бұрын
do you sell your jigs?
@mildred6305
4 жыл бұрын
greg tanner Beautifulll Work 🙌😍 thanks
@nancelee3535
2 жыл бұрын
@@patwinter2659 I would love one too
@kristincochran4658
Жыл бұрын
I'd like to buy one too. Let us know
@donnasvt13 жыл бұрын
Can you do a video on making your jig?
@sheilaboop3284 Жыл бұрын
Thank you! 😊
@annasanders84014 жыл бұрын
Easy! Thank you!
@evelyngorman55845 жыл бұрын
Can you show how you made the jig? What size pipe do you use?
@bonitatanner3984
5 жыл бұрын
I will let you know if still interested. This is Greg wife Bonita. Great way of starting out.
@christophergonzalez56534 жыл бұрын
I want to make a jig like that with my Everlast welder.
@amiasmileface99814 жыл бұрын
What can you use if you don't have any facy metal-molds to make the U shape with. What tools would you use?
@ybsisKaren3 жыл бұрын
Need to have the camera closer.
@deletemeyoutube88854 жыл бұрын
Is that a house jack?
@009656g4 жыл бұрын
Do you have a website where you sell your jewelry?
@ranamike1045 жыл бұрын
How did you make your jig?
@Trixwashere8 ай бұрын
Edging
@debbieglenn-mh2uh11 ай бұрын
What r you using for the jig?
@gregtanner584
11 ай бұрын
The round part of it is 1 1/4 steel pipe nipple, I then drilled a hole in a piece of flat steel plate used long bolt and nut to secure together and drilled another hole about a 1/4” away from the pipe and put a smaller bolt to slide spoon or fork into to hold flat against pipe to bend. Hope this helps Greg
@debbieglenn-mh2uh
11 ай бұрын
@@gregtanner584 thanks so much
@SilkCityIndependent5 жыл бұрын
Could we please have a close up and description of the jig?
@bonitatanner3984
5 жыл бұрын
Hi, let me get my husband to answer.
@bonitatanner3984
5 жыл бұрын
He is going to go take some closeup pictures and another video of how we do it. I is really easy once you get the hang of it. No need in buying the expensive equipment, plus the press just to make jewelry. We will show more a curate step by step info.
@SilkCityIndependent
5 жыл бұрын
@@bonitatanner3984 awesome! Thank you. 😁👍
@bonitatanner3984
5 жыл бұрын
Got very busy today with "Life". He will get up the info Saturday evening!
Пікірлер: 27
Sorry for the long delay on responding, I really don't get on here very often. The jig I made out of this around my garage, the main barrel is a 6" long piece of steel pipe, I cut the threaded ends off. The case can be anything solid metal, a piece of flat steel is fine. Used a 3/4" hexhead bolt, used a 1 1/2" flat washer on top, put the bolt through pipe, another flat washer, through base then a lock washer and self locking nut, then about 1/4" away drill another hole for a 1/2" bolt and threaded base plate, put bolt in leaving about 2 inches tall and cut bolt off and used vinyl tubing to protect silverware, then I just use the nut on bottom in vise to hold.
@patwinter2659
4 жыл бұрын
do you sell your jigs?
@mildred6305
4 жыл бұрын
greg tanner Beautifulll Work 🙌😍 thanks
@nancelee3535
2 жыл бұрын
@@patwinter2659 I would love one too
@kristincochran4658
Жыл бұрын
I'd like to buy one too. Let us know
Can you do a video on making your jig?
Thank you! 😊
Easy! Thank you!
Can you show how you made the jig? What size pipe do you use?
@bonitatanner3984
5 жыл бұрын
I will let you know if still interested. This is Greg wife Bonita. Great way of starting out.
I want to make a jig like that with my Everlast welder.
What can you use if you don't have any facy metal-molds to make the U shape with. What tools would you use?
Need to have the camera closer.
Is that a house jack?
Do you have a website where you sell your jewelry?
How did you make your jig?
Edging
What r you using for the jig?
@gregtanner584
11 ай бұрын
The round part of it is 1 1/4 steel pipe nipple, I then drilled a hole in a piece of flat steel plate used long bolt and nut to secure together and drilled another hole about a 1/4” away from the pipe and put a smaller bolt to slide spoon or fork into to hold flat against pipe to bend. Hope this helps Greg
@debbieglenn-mh2uh
11 ай бұрын
@@gregtanner584 thanks so much
Could we please have a close up and description of the jig?
@bonitatanner3984
5 жыл бұрын
Hi, let me get my husband to answer.
@bonitatanner3984
5 жыл бұрын
He is going to go take some closeup pictures and another video of how we do it. I is really easy once you get the hang of it. No need in buying the expensive equipment, plus the press just to make jewelry. We will show more a curate step by step info.
@SilkCityIndependent
5 жыл бұрын
@@bonitatanner3984 awesome! Thank you. 😁👍
@bonitatanner3984
5 жыл бұрын
Got very busy today with "Life". He will get up the info Saturday evening!
Un