SPLIT-FIRE 4206: A Cross Mount Skid-steer Log Splitter
Тәжірибелік нұсқаулар және стиль
RE-UPLOADED DUE TO AUDIO ISSUES
This video is our official introduction of our cross mounted skid-steer machine, the 4206. In the following months we hope to release videos of the 3206, and 4406.
Both are similar machine with different features, so stay tuned for those releases.
This video is also a follow up of our previous video, 4206 Prototype. • Split-Fire 4206 Prototype
Build and price your own on our website :
CANADA: split-fire.com/skidsteer-wood...
USA: split-fire.com/us/4206-log-sp...
The 3206 and the 4406 are also live on the website. Be sure to check them out too!
Introduction and Explanation 0:00
Splitting Action 2:49
Specs 4:59
Splitting Action Cont. 5:30
POV Splitting 5:48
Conclusion 6:32
Пікірлер: 5
Very nice design. Rally like the knife cutting both ways. I recently built a front m logo until and redesigned to mount from the right side of the plate at 45 degree Allowing me to see All the action. Yours Has several advantages over mine.
Lots of potential, any further video on interlocking grain (sycamore?) or tree stumps/roots!
I'd love to see how it handles knotty burr oak, I'm seriously considering buying one of these
@SplitFireSalesInc
4 ай бұрын
Burr oak would be a tougher split but the 4206 should have no trouble going through it! Assuming that your skid steers hydraulic pressure is around 3000 psi.
it splits twice as fast if you have rounds that are 8'' long and pop apart maple