REGARDING THE MOTOR ROTATION - I had a follower mention you can switch the Blue and Orange motor terminals to remedy the issue of the reverse being 100% and the forward being 25%. Just In case your Transmitter does not have the options to reverse them. This would be the solution. Thank you for the TIP!!!

@ChrisCroft77

Жыл бұрын

As it is a brushless motor swapping any 2 connection will make it turn in other direction.

@EastTactics

Жыл бұрын

🤔👍

This video saved me! I bought two of these ESCs (to power a dual motor RC 10x10) and, like you said, both cards had different default data. I couldn't understand why my motors were spinning in opposite directions while, also, jumping the dual rubber toothed belts. One was defaulted to CCW and the other was CW. Luckily I didn't do any irreversible damage. I changed one of the ESCs to setting 2:2 and it worked perfectly!

@EastTactics

2 ай бұрын

Nice! Well done

So cool to dude this stuff! I passed on a winning because I didn't have rc for the stuff, but now that I have a Kraton 6s v5, its on people!

Thanks. Super helpful with my new used outcast 8s

Congratulations on getting Basher Queens on board! Can’t wait for next year’s jumps!

@EastTactics

Жыл бұрын

🔥🔥😎🔥🔥😎😎🔥

I have this beast in in about 6 of my rigs I love this thing

Hope to see you posting again soon, new Kraton EXB owner here! Been learning a lot on the channel. Thanks for all the info!👍👍

@EastTactics

Жыл бұрын

Definitely! With this warm weather right around the corner, you can count on it. Crazy though it’s snowing here in late March.

@micron3268

Жыл бұрын

Yeah I know all about it living in Michigan 🥶 What state are you in?

Just ordered some basherqueen stuff for the TYPHON 6S Should be here tomm.

@EastTactics

Жыл бұрын

Nice

I came from flying los acro quads, one of the first things I ditched was the stock radio. I don't have a ton of time on surface radios, but upgrading your radio is great advice. I have the flysky noble and the radio link both are so much better than the stock radios it adds a totally different feel to the car and it makes it easy to set expo epa etc. Great video btw :)

@EastTactics

Жыл бұрын

Thx!!

Hey man welcome back! I was just thinking about you. Me and my Labrador retriever were talking and playing fetch and he said what happened to that east tactic dude? Well it sounded more like: Woof woof arf woolf woooooof woof!

@EastTactics

Жыл бұрын

lol... been a bit hasn't it. dang cold whether ha ha... that and I'm being lazy. lots planned tho... always a pleasure hearing from ya... and your pup. We have a Great, Pyrenees, just celebrated her 2 year birthday.

I'm thinking pulling out 160 out 8s outcast putting on one my 6s guys I like it but it's a dog with that set up , sucks have spend 4 500 to upgrade 8s guys . I finally did buy that programmer ..I thought same way as you but I bought a sencered system and had no choice but to buy the programmer , really is worth it bc other settings you can't do like temapture shut off

Many people bro just use the Spectrum tool to do this much easier. Not many people actually wait for beeps anymore bro lol. But yeah great Instructions on how to do it. Only the older BLX stuff I use to do that. Spectrum esc programming for firm is the SPMXCA200 that's the one I've been using works great. 👍

@EastTactics

Жыл бұрын

👍

Oh Basherqueen as sponsors that’s great. Currently my Kraton has left front suspension bent and broke from first drive after fixing. 😢 Oh by the way I still don’t have the package from August as I have no idea what local post have done with it as they say it not trackable as it’s an international package.

@EastTactics

Жыл бұрын

Odd … let me look into that

@EastTactics

Жыл бұрын

Just sent you an email with the details I have… I can’t believe this package is still in transit. Crazy!

@ChrisCroft77

Жыл бұрын

@@EastTactics another question what front higher pin do have and do use the EXB bumper?

Has anyone had the problem of a 150 firma the on/off button the ribbon to the esc shorted out is that something i can repair possibly or delete?

PLEASE READ THIS!! I am a VERY satisfied subscriber/supporter - I have never been a patreon person but I signed up with Randy East and he has provided me IMMEDIATE and INVALUABLE support via text for almost a full day to walk me through issues - based on his channel, I bought a Kraton 6S EXB about a month ago - haven’t even driven it yet as I am installing a bunch of the after market parts and changing out the diff fluids - ran in to a big problem re-assembling the rear diff - would not fit no matter what I did and no matter what housing (plastic stock, Hot Racing metal or RCAWD metal) I used - the last limited slip star gear always placed above the housing - Randy answered my text within 5 min, sent me pictures, suggested fixes and stayed with me for most of Saturday - I was really frustrated but he really helped including recommendations on how to prevent leaks once it dawned on me what was wrong - turned out I was installing the stock, rectangular shims vertically rather than horizontally - fits now - Kratons and the like are serious machines and it really helps to have a pro in your corner - outstanding Randy, thanks

@EastTactics

Жыл бұрын

Anytime! Thank you for those kind words it was a pleasure assisting. I’m excited for you to embark on this fantastic hobby in high-end RC! Feel free to reach out anytime even the simplest question arises. 💪

Have you ran the 8s esc yet? Just wondering if it runs cooler then the 6s🤷🏻‍♂️if not I’ll find out soon I’m putting one in my fireteam because the stock system is way to slow on that chassis.great video Randy!

@paulclancy2404

Жыл бұрын

Ofcourse it will your motor will run cooler also , alway go overpower on esc and you generally have no heat issues 😜

@EastTactics

Жыл бұрын

Yes, much cooler

When will those bulkheads be available again? I should have jumped on the first batch 😭

@EastTactics

Жыл бұрын

She said something to me about sometime next month. But you’ll have to keep a close eye out. I’ll try to alert everybody when I see ‘m

@oggoblin295

Жыл бұрын

Yeah, an alert would be super helpful. 🤘

Your welcome

@EastTactics

Жыл бұрын

👍😎👍…🤜🤛

@blacksheeprc8113

Жыл бұрын

@@EastTactics man I don't know if you remember me telling you I talked to her and asked her if she'd be willing to join it this year and she said she would put some time and effort into thinking about it and you know she had some other sponsorships and things like that going on but she'd let us know and well apparently you've got a hold of her and she let you know and that is absolutely amazing bro congrats on getting another sponsor and quite frankly congrats on getting one of the best customer service best all around hands down probably the best experience I've had dealing with any dealer of any RC product @basherqueen 💪🔥❤️❤️❤️ Kimberly I'm sure you'll see this you're amazing and there's a reason why we all love you keep being you keep being great

@EastTactics

Жыл бұрын

She is the Queen! And well deserved!

Where you been bro???

@EastTactics

Жыл бұрын

I’ll be back full swing in the spring with jump competitions. Been taking a break here in the winter. 💪💪

@TurtleRc

Жыл бұрын

Rodger any hints for any new projects?

@EastTactics

Жыл бұрын

Just playing it by ear :)

I run these firmmas in my r cs. These things has power I like hobbywings esc 5. 6. But the firrmas better

Hola cómo puedo bajar el voltaje de corte de las baterías??? Se quedan en 50% ir a tarjeta no tiene la opción

@EastTactics

5 ай бұрын

What ESC do you have.

@carlosrubio7455

5 ай бұрын

@@EastTactics spectrum 150 A arrma INFRACTION

@EastTactics

5 ай бұрын

¿Tienes el manual del Limitless? Dentro encontrarás una tabla e instrucciones para cambiar el "corte de bajo voltaje" del ESC. Puedes iniciar el video desde el siguiente enlace. He configurado la URL para que comience en el momento importante. Solo sigue estas instrucciones (en el video, pero en su lugar, inicia en la opción de corte de bajo voltaje, creo que es la tercera opción) 3 pitidos en el Spectrum 150... pero no estoy seguro. Tendrás que consultar tu manual. kzread.info/dash/bejne/eo55lJmApseymMY.htmlsi=fngRl1guAv3FQ90- Enciende el ESC: Conecta la batería al ESC y enciende el ESC. Mantén presionado el botón de configuración: Mientras el ESC está encendido, presiona y mantén presionado el botón "configuración" (generalmente ubicado en el propio ESC) de acuerdo con las instrucciones de tu manual. Esto puede implicar mantenerlo presionado durante un período específico (por ejemplo, 3 segundos) o hasta que ocurra una secuencia de luz LED específica. Suelta el botón y espera: Suelta el botón "configurar" y espera a que el ESC entre en modo de programación. Esto podría estar indicado por un sonido específico (por ejemplo, pitidos) o un patrón de luz LED como se describe en tu manual. Navega a la configuración de LVC: Según tu manual, presiona el botón "configurar" la cantidad de veces correspondiente a la configuración de LVC, que en tu caso es tres veces según la información proporcionada. Esto debería llevarte al modo de ajuste de LVC. Ajusta LVC (si corresponde): Si tu modelo permite el ajuste de LVC a través de la programación con botones, sigue las instrucciones de tu manual para aumentar o disminuir el valor de LVC usando el botón "configurar" u otros botones según se especifique. Esto puede implicar secuencias de botones específicas o mantener presionado el botón durante diferentes duraciones. Guarda la configuración: Una vez que hayas elegido el LVC deseado, sigue las instrucciones de tu manual para guardar la nueva configuración en el ESC. Esto puede implicar mantener presionado el botón "configurar" durante un período específico o seguir una secuencia de botones específica. Sal del modo de programación: Consulta tu manual para conocer el método correcto para salir del modo de programación. Esto podría implicar apagar el ESC o seguir una secuencia de botones específica. Desconecta y vuelve a conectar la batería: Desconecta la batería del ESC nuevamente y reconéctala para apagar y encender el ESC y asegurar que la nueva configuración entre en vigencia. Recuerda: Verifica la información: verifica el número de pitidos que corresponden a la configuración de LVC y las secuencias de botones específicas en el manual de tu ESC. Procede con precaución: Si encuentra alguna dificultad o incertidumbre durante el proceso, deténte inmediatamente y consulta el manual de tu ESC o busca ayuda de un técnico calificado.

@carlosrubio7455

5 ай бұрын

@@EastTactics muchas gracias por toda la información, la verdad es que te agradezco mucho tu implicación. Ya he probado en esc y en el apartado 3 solo hace un pitido y no me deja más . Por más veces que le doy solo tiene un modo que es un pitido. No lo consigo , pero muchísimas gracias te lo agradezco de verdad.

@EastTactics

5 ай бұрын

En el caso de la firma 150, es posible que la opción 3 no sea la correcta. Este video trata sobre la firma 160, no sobre la 150.

What wheels and tires are those?

@EastTactics

Жыл бұрын

Proline trenchers - non belted 💪

@EastTactics

Жыл бұрын

​@@chrisparrill2086 🤔 not sure... I always thought those were the rims that came with it. However I can't say because those tires were gifted to me from a subscriber believe it or not. I'm not sure if he picked up custom rims separately or what. The rims them self have a small logo on one of the spokes that reads PL. Which leads me to believe they're also proline

@chrisparrill2086

Жыл бұрын

@@EastTactics Roger that, love the wheels. Keep up the great content

You do know that you could have saved yourself some time and a long ass video if you just switched your motor wires in the right position. This is why you didn’t have full throttle in forward. That blue wire is wire C the middle yellow wire is B and the first red wire is wire A. You had your wires crossed the whole time. Although your video is informative. The information you gave about the power output was misinformation based on your wire position.

@EastTactics

Жыл бұрын

You know, I do agree that section is a bit long-winded. I had an itching feeling that the solution or a remedy to that hangup could have something to do with changing the wire positions. However, I did simply plug the wires in based on their color coding, which I’m sure most people will do. Your comment mentions a red wire in my case. However, there is no red wire, so you must be referencing the orange. Going against the color coding is fine. I just want to make sure it’s clear. Are you saying the orange and blue wire can/should be switched? That does make sense, and I wish I would have mentioned this. Thanks for the enlightenment.

@rooseveltrainesjr1536

Жыл бұрын

Hey I need u as a hobby buddy. U no your stuff

@EastTactics

Жыл бұрын

Happy to help. I always try to be fairly quick to respond if you message me a question in any if my videos.

@BigPremo711

Жыл бұрын

Yes I meant the orange wire. Usually cans(motors) that are under 6s with the exception of Spektrum motors with the short wires and small plugs on the back of the can it’s A-B-C and motors with 6.5mm plugs it’s C-B-A. I don’t know why they do that but I use this as a general rule of thumb. I greatly appreciate the fact that you can take constructive criticism, and make corrections accordingly. You will go very far with that attitude. Because it means that you can be a student and a teacher. So Kudos to you my friend. And would love to be your RC sidekick. 😁😁 I have a wealth of info to share. I have some videos that I am editing right now. Make sure you like and subscribe and contact me any time for any questions you may have.

@BigPremo711

Жыл бұрын

By the way. I love the way you format your videos.