Spektrum DXs Transmitter modes explained please subscribe @Tallguysrc and turn on notifications if you need help with your spektrum transmitter www.spektrumrc.com
Жүктеу.....
Пікірлер: 21
@ModelAV8RChannel5 ай бұрын
Nice, helpful video man. A lot of folks have questions about that.
@steveolson7638Ай бұрын
I am a total noob and you video saved me a lot of frustration. I got a turbo timber evolution and the landing flaps didn't work with the DXS. Your tip on updating the firmware saved me a lot of time. But they were reversed from the flight sim model. Finally got it squared away and first crash is tomorrow. Thank You!
@gliderriderАй бұрын
I’ve been out of the hobby for over a decade. Things have changed for the better. Excited about the telemetry options!
@doubler12745 ай бұрын
💯💯Excellent 💯💯
@atatistcheffsАй бұрын
Simple and too the point - good job!
@Jeevs900Ай бұрын
Thank you bro, this helped a lot👍
@larryhawkes13473 ай бұрын
The top left switch actually has three functions, safe intermediate and advanced. With the stick in the intermediate middle mode, hold the ailerons left stick while you roll the airplane to the left and the ailerons will go back to neutral once you roll more than 90° the left. Same with right aleron and elevator. At least that's the way it works with the aeroscout, I'm assuming it would/might do the same with some of these other planes.
@aloeisthestuff9622Ай бұрын
If I'm seeing this correctly You just got full control of a Turbo Timber Evolution on a Spektrum DXs..?? I've been searching for 2 days to see if this was possible. You were the first to show it is. The few who have tried this ended up with some Crazy BS on the Flaps control! I'm at least willing to Try this now. I've now tried this on the TTE and the Flaps do work but there is No elevator adjustment added and the plane will NOT fly straight and level. The DXs will cause many crashes due to this. Bad Proprietary crap again..
@stefanisdigital4 ай бұрын
Best video yet to help me make a decision for a remote for the Draco Micro. One thing.. I wish you covered the trim. In another video I learned that when you drop the flaps, the nose balloons. Is there no trim on this transmitter, and is the change in trim manageable for newbies?
@aloeisthestuff9622
Ай бұрын
I'd be ready on that Elevator, Give it a try. Maybe the half flap is not an issue.?
@masoodbm5 ай бұрын
Thank you for the excellent explanation. I'm waiting for the cable to update mine. How about retractable wheels, how can we assign a switch in mode 2? Thank you again
@aloeisthestuff9622
Ай бұрын
You need a 7th channel.
@martybarrett5233 ай бұрын
I see your conscendo sitting back there, will the DXS work with the conscendo? I’ve heard safe and flapperons will not work at the same time, it’s either or.
@jeroldmanista4 ай бұрын
great job, very helpful, question can the DXS use the ws2000 simulator on the computer?
@malatoke
3 ай бұрын
Yes, you can bind it to the usb dongle and use it with a computer. I've done this with my son so he can train on a simulator with his radio.
@HusseinTTRN-yx6ft4 ай бұрын
How would I be able to extend the range on this Transmitter ? Do you let me know please and thank you
@MrHipwell19894 ай бұрын
Do you have to rebind each time you change plane?
@malatoke
3 ай бұрын
Yes, it will stay bound to the last plane. You'll need to re-bind to change planes.
@dwightgoodman2116Ай бұрын
Sounds like the DXS transmitter that came in the package with the Apprentice STS 1.1m is about worthless. LOL.
Пікірлер: 21
Nice, helpful video man. A lot of folks have questions about that.
I am a total noob and you video saved me a lot of frustration. I got a turbo timber evolution and the landing flaps didn't work with the DXS. Your tip on updating the firmware saved me a lot of time. But they were reversed from the flight sim model. Finally got it squared away and first crash is tomorrow. Thank You!
I’ve been out of the hobby for over a decade. Things have changed for the better. Excited about the telemetry options!
💯💯Excellent 💯💯
Simple and too the point - good job!
Thank you bro, this helped a lot👍
The top left switch actually has three functions, safe intermediate and advanced. With the stick in the intermediate middle mode, hold the ailerons left stick while you roll the airplane to the left and the ailerons will go back to neutral once you roll more than 90° the left. Same with right aleron and elevator. At least that's the way it works with the aeroscout, I'm assuming it would/might do the same with some of these other planes.
If I'm seeing this correctly You just got full control of a Turbo Timber Evolution on a Spektrum DXs..?? I've been searching for 2 days to see if this was possible. You were the first to show it is. The few who have tried this ended up with some Crazy BS on the Flaps control! I'm at least willing to Try this now. I've now tried this on the TTE and the Flaps do work but there is No elevator adjustment added and the plane will NOT fly straight and level. The DXs will cause many crashes due to this. Bad Proprietary crap again..
Best video yet to help me make a decision for a remote for the Draco Micro. One thing.. I wish you covered the trim. In another video I learned that when you drop the flaps, the nose balloons. Is there no trim on this transmitter, and is the change in trim manageable for newbies?
@aloeisthestuff9622
Ай бұрын
I'd be ready on that Elevator, Give it a try. Maybe the half flap is not an issue.?
Thank you for the excellent explanation. I'm waiting for the cable to update mine. How about retractable wheels, how can we assign a switch in mode 2? Thank you again
@aloeisthestuff9622
Ай бұрын
You need a 7th channel.
I see your conscendo sitting back there, will the DXS work with the conscendo? I’ve heard safe and flapperons will not work at the same time, it’s either or.
great job, very helpful, question can the DXS use the ws2000 simulator on the computer?
@malatoke
3 ай бұрын
Yes, you can bind it to the usb dongle and use it with a computer. I've done this with my son so he can train on a simulator with his radio.
How would I be able to extend the range on this Transmitter ? Do you let me know please and thank you
Do you have to rebind each time you change plane?
@malatoke
3 ай бұрын
Yes, it will stay bound to the last plane. You'll need to re-bind to change planes.
Sounds like the DXS transmitter that came in the package with the Apprentice STS 1.1m is about worthless. LOL.