👍 SpeedyBee F7 Mini: DJI-ready, Bluetooth, 35A 4-in-1 ESC, 20x20 Stack
BLUF: It's not cheap at $95, but it's a solid 20x20mm option with lots of features and two 9v pads for DJI VTX. The bluetooth/wireless setup capability is actually super duper useful 👍. The biggest downside is that the silicone grommets are TOO SHORT to properly seperate the ESC from the frame and the ESC from the FC. ☹️👎
Link to SpeedyBee product page: www.speedybee.com/speedybee-f...
Thanks to SpeedyBee for providing this stack for review and use in my latest experiment, the Venn drone • The NextGen CineWhoop ...
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
Пікірлер: 20
I switched to a backup skystar garbage stack and have been flying it happily since.
I bought the SpeedyBee Bluetooth adapter that you just solder your LiPo wire to it. I use it all the time for all three of my GEPRC Dolphins. I love that thing you can use that app with it.
The quality of your vids is inspiring!
@RCwithAdam1
2 жыл бұрын
Thank you!
Very good review Adam
I just purchased it on Amazon because they offered a 3 year warranty for an extra $10. That’s pretty incredible for a flight controller & esc.
@RCwithAdam1
2 жыл бұрын
Let us know how the warranty claim goes (if you need to use it).
Hi... Adam😊speedy bee fc is compatible to the flysky fs-16x??
bro ... flysky fs i6 transmitter can bind with xk a800 glider
Asking for a large amount of data over Bluetooth from my full-sized Speedybee f7 v2, it never can send all the information. Like when commanding a 'dump' or 'diff all'. Can you tell me if this fc can transmit a full healthy dump or diff all command via Bluetooth? Thanks!
thx
Can we connect 4 individual ESCs with this flight controller?
does it have a barometer (altimeter) ?? my gps is talking to the FC (serial passthrough test)
Can you tell me what solder you use ? I got some from Amazon and its awful
flysky fs i6 transmitter can bind with xk a120 a380 air bus receiver
Did you fly that drone upside down?
I purchased the speedy bee F7 V3 stack. I received it with bent pins. I always inspect the ports before using a product. I contacted Speedybee and they offered me a 20% discount on replacing their defective product. Be careful working with them. If you end up with a defect, they blame you instead of offering any customer service to rectify their failure. I'll personally never use another Speedybee product and I'll not repair any quad containing their products. Be careful with they so called "warranty" claims. They don't actually warranty their products.
the v2 version is absolute absolute garbage. The uarts fail randomly on 3 boards i have used. I soldered correctly all of them because they did work for about three flight. I would change the uart to a different uart and it would work again for a bit then quit working slowly and randomly after about 3 flights. Absolute Garbage.
Hey @RCwithAdam Do you still like this stack I'm thinking about getting 1 for a squirt I'm building I just got 2 of the 30x30 cheaper speedy bee stacks I cant wait to try them out
@RCwithAdam1
Жыл бұрын
Yeah it's been great so far!