Want more Special FX ? 🤔 kzread.info/head/PLkd3s0ymmV0OVNiwieSDpr8wY52M7Gb0S

@sneakyreekycustoms2596

3 жыл бұрын

Airbrush Asylum I custom paint shoes. Do yo think the Mutant Crystal would give the same effect on acrylic paint?

@codydennis8126

3 жыл бұрын

YES!

@noejuliansaavedra

3 жыл бұрын

Where did you buy the crystallizer product?

@agelessrealrealbeauty7093

3 жыл бұрын

Wat is the name of that chemical applie before the colour red...

@devstickers

2 жыл бұрын

I want crystal spray

To make crystal formule use: 100ml water 100ml Uréia (you find in agriculture shop) 5ml soap.

@RonGotSole

2 жыл бұрын

Do you know if this would work on waterbased acrylic paint?

@wongmbambung3338

2 жыл бұрын

Yes, that is true. very easy to make mutant crystal liquid with low cost 😊

@rochab91

2 жыл бұрын

@@RonGotSole Water-based paint will dilute when you apply the formula, I don't know if it works, but if you test it, let me know the result.

@Musclemustang351w

2 жыл бұрын

Any soap? Like dish soap?

@watchmeplayenergy281

Жыл бұрын

What is the purpose of the soap?

That looks awesome! Great custom look with simple technique and great product.

@AirbrushAsylum

3 жыл бұрын

Yes, it most certainly is ...glad you liked it 👍🏻

Oh my goodness! I can here my car out there hoppin' up and down " DO ME, DO ME!!"

That is so very cool. I love it. Great tutorials and thank you.

Looks fantastic.

Looks fantastic

incredible! I never knew this stuff existed ! Thanks for the video...cheerio!

Thank you ! Learnt a lot.

I never knew something like this even exists I was blown away from the silver part 😁 So amazing Sir 🤍

Very cool - didn't know stuff like this existed

Awesomeness 👌 👏 👍

Awesome!

Hi , after the crystals have formed and then you put the second lack coat over them ,,, do you let the black dry before you scrub with the warm water pad ? thanks

Seen a couple of crystal vids,still amazed how good it looks. Can't wait if you do decided to put art work over it 👍👍

@AirbrushAsylum

3 жыл бұрын

Thanks it’s awesome stuff and I think I’m going to have to airbrush over it 👍🏻🤔

Damn! That is cool!

That awesome that effect ! you said you spray base coat silver and straight on top you put urea mixture, didn't spray on clear coat ? How much you wait once before spray black coat ?

parabéns Belo trabalho!

Very cool 😎 👌

Amazing

Simplesmente maravilhoso

Very good super talented!!!!!

Exelente trabajo máster 💯

How long are you allowing each coat of paint to dry before moving on to the next step?

With Ad blue looks good too

@jurikristjouw

3 ай бұрын

I concur, just boil it in half and add some drops of ox bile/dish soap ;-)😜

Nice work

Could you use Diesel Exhaust fluid to create the crystals? How would it look had you not painted the panel silver?

Hi AS, Can you use a clayboard panel to create the crystal affect ?

Did you apply the solution whilst the silver was still wet? Or waited for it to dry

That is cool as hell

@AirbrushAsylum

3 жыл бұрын

Thank you 🙏🏻

Very cool, might try that on a guitar body.

Can I create the same/similar effects with acrylic paints? (Because I have to paint indoors.) What are all my options for making cool effects but with water based materials?

Super bro

Good job

What kind of basecoat paint is the silver and black? Not water based?

the black coat after crystal, should I wait until black coat fully dry or like nearly dry?

Very nice, good job. Can used Epoxy crystal or only mutant crystals?

This is supper cool and amazing but how can I get the materials and what are they?

How long do you let the black dry for

Awesome

@AirbrushAsylum

2 жыл бұрын

Thank you 🙏🏻

New viewer. I'm guessing that monster of an air brush you used with the silver is the reason you use a shop compressor?

I intend to buy an airbrush gun. Which needle size is best for beginners?

What is the black paint you used, is it a water based or urethane paint?

Can you help us please: What are the ideal enviroinmental temperature and Humidity ? My Crystals dont seem to form big.

Can this effect be used on a water-based acrylic paint?

I have a gun stock I would like to do this process on and my question is can I use rattle can paint? so I don't have all that expensive paint laying around that I won't use and go to waste.

Can i use sleek instead of clear cot

Does this stuff have a shelf life? Used this 6 years ago, and just found half a bottle left over….might give it another go. 👍

Thank you Airbrush Asylum for the wicked tutorial as always! I know this is sponsored, and the idea is to push a product. BUT, I want to just share that this can be reproduced at an albeit shittier quality. Water Urea ammonia common liquid dish soap! Crystal Effect solution is as old as I can remember!

My car is silver can I just clear coat over the crystals. I just like the effect and don't want to do any color changes.

Can I do this over a regular wall? It would be perfect!

Hi, I'm having issues with my results, the crystals I get are much smaller than yours, what an I doing wrong?

Can I paint that from the inside off a 110scale rc car lexen clear body shell

Waw ..... never I hav seen this type

Very good

@AirbrushAsylum

3 жыл бұрын

Thank you 🙏🏻

Can we try this same into the canvas?

Super easy love the look of this dont no how iv never seen it before! Was wondering after clear coat can this be sanded back to a smooth finish?

@AirbrushAsylum

3 жыл бұрын

Thank you and yes it’s super cool, I would recommend using a ‘build clear’ so it can be sanded smooth and then you can paint over it 👍🏻

@Ghost-ko3zs

3 жыл бұрын

Airbrush Asylum : perfect il be using this on a project im working on now keep these vids coming mate bin painting from 2k gun, spray can all way to airbrush for about 8 years and still u came with information iv never seen before lol guess i need to start getting back to researching not just using one shop lol thanks again man and keep up these videos

AWSOME!!!!! 🇸🇪🇸🇪🇸🇪

@AirbrushAsylum

3 жыл бұрын

Cheers 👍🏻

How does this stuff take to masking?

What are your drying times in-between each step? Will this work with water based airbrush paint? My thought is when you wet the crystals with water to be scrubbed off, all the black paint would come off as well.

@area52designscustompaint6

Жыл бұрын

allow the part to cure 30 min at 20 c use a hair dryer on low to be sure its fully dry and use warm to hot water and use your hand to remove the mask effect

Can we use any base color

Nice 👍

@AirbrushAsylum

3 жыл бұрын

Thank you 🙏🏻

Nice 👌👌👍

@AirbrushAsylum

3 жыл бұрын

Thanks glad you liked it 👍🏻

so can you mask off a large area say for a skull and do this crystal method to have it in the back ground?

@AirbrushAsylum

3 жыл бұрын

Yes you can mask a section and then crystallize, just make sure it’s a vinyl or fine line tape on the edge as otherwise it may deep through ? As you are applying the crystals heavily with a cloth 👍🏻

Merhaba bunu mobilya için de yapabiliyor muyuz

How I purchase this mutant crystalz paint in india and what is the price.

Where i find crystal liquide

Loving this effect, does it work over all cured paint surfaces, waterbased, solvent etc. ?

@DNAPaints

3 жыл бұрын

Works on solvent based, works on all DNA products. havent tested on waterbased, please check the data sheet. dna-paints.com/wp-content/uploads/Mutant-CrystalZ-TDS-V1.5.pdf

Hey mate, Can you use this on warhammer miniatures?

Can you use this stuff on things like nerf guns?

What type of paint are you using?

Sir suuper

Nice

@AirbrushAsylum

3 жыл бұрын

Thank you 🙏🏻

Where could I buy some urea??

Can I get this product in the USA?

what is the correct name of this product? I'm from Serbia, so I'm interested in whether it can be found on eBay

how does it turn out on a textured surface, like on a canvas. may be interesting. thanks love the vids.

@DNAPaints

3 жыл бұрын

We havent tested on a canvas. Canvases are flexible so not sure if it's going to work. You could give it a go, it may have issues with adhesion. refer to TDS: dna-paints.com/wp-content/uploads/Mutant-CrystalZ-TDS-V1.5.pdf www.dna-paints.com/mutant-crystalz/

Do you think there would be a way to reduce the size of the crystals? I'd like to try this on some of my scale models 1/25 scale.

@jimboh5131

Жыл бұрын

I've read that force-drying the solution ( hair-dryer or heat gun ) produces finer/smaller crystals.

Mujhe crystal liquid mangwana hai

Wow lacuqer

Ficou lindo mas eu gostaria que tiveselegalendas em portugues valo e estou vendo do Brasil obrigado

What temperature was the room while the crystals were growing? And how long did it take to grow?

@AirbrushAsylum

2 жыл бұрын

It happens fairly fast , I think from memory it was raining the day I filmed this so prob around 20oC or just under 👍🏻

Is there any way to control the consistency of the effect or size of the crystallization?

@AirbrushAsylum

2 жыл бұрын

You can definitely play around with it by adjusting the level of crystalz applied, the direction of how you apply it, it all just comes down to experimentation.

only in Australia?

Would it be to much if it was flake then mutant crystals then black then candy?

@area52designscustompaint6

Жыл бұрын

That can work apply each coat lightly

It is best for smaller areas.

@AirbrushAsylum

3 жыл бұрын

I haven’t tried it on anything large🤔 , but I think with any effect it works best as a small feature or as a background for artwork etc 👍🏻

Does the mutant crystal have to be applied with a rag as you did or can it be sprayed onto the surface and still achieve the same look?

@AirbrushAsylum

3 жыл бұрын

As far as I know using the dish cloth is the best method , not sure if it can be sprayed 🤔

@oldblinddarby2498

3 жыл бұрын

You can spray products like this using spray bottles or those spray paint systems that employ a jar and your own paint with an aerosol can of propellant (cant remember the name, sorry). Brushes and rollers can be employed as well. All will give different results, and the technique, direction of movement, and application method all effect size and direction of crystal growth. It's important to experiment on multiple surfaces before applying to the final surface because even the topography of the surface your painting effects the crystals. For instance I was doing a job and the crystals emphasized the edge of a surface on one side but not the other and it ultimately looked disjointed. I opted to repaint. Sanding direction changes crystal direction growth immensely and can be used to manipulate how they grow. You can get interesting effects by wetting some areas before others, or by varying the volume applied in different areas. I often use an old hairspray bottle to apply these crystal products because it provides an even and very thin mist while still being easy to use and disposable and capable of wetting a relatively large area rapidly Note.... my experiences were with a similar product but a different brand. Best advice is to experiment. Get a bottle and waste it just playing around.

@oldblinddarby2498

3 жыл бұрын

One additional note... if you attempt to spray, make sure you use a larger opening, not an airbrush, I wouldn't use anything smaller than 1.6

@DNAPaints

3 жыл бұрын

It's designed to be applied with a rag. dna-paints.com/wp-content/uploads/Mutant-CrystalZ-TDS-V1.5.pdf

I want that product in India did you?

منظر جميل جدا

how long did this take from start to finish including crystal formation time?

@area52designscustompaint6

Жыл бұрын

its all temp related, it can take hours, apply sparingly from a spray bottle less is better allow the effect to cure lightly coat it and let it dry

Can you flake it or would the flake cover the crystal affect 🤔

@AirbrushAsylum

2 ай бұрын

You could add a mini flake into an intercoat clear and try that or better yet do the flake first and then experiment with doing the crystal over that then candy 😉🤘🏻

Nos no Brasil gostamos de tequinicas como a sua mas presisamos das lejendas em portugues para te dar mas visualisasao lega esta visao

I tried this out and got serious beading, let me with a white beady mess. It's there a paint and/or canvas material that doesn't work with this technique?

@AirbrushAsylum

2 жыл бұрын

That sux...it generally works really well on all hard surfaces if you want more technical info then I would reach out to DNA paints direct via - dna-paints.com

mmmm that is sweet. would that work on wood?

So "after silver dries"...How long after was the drying?

@area52designscustompaint6

Жыл бұрын

30 min

Dang I want to do this on my tank.

Hi.. good work . İwant to ask somethink.. Can i use this paint on wood?

@AirbrushAsylum

2 ай бұрын

Great question, I assume it would however you will need to prime it and then base it up 👍🏻👍🏻 check with dna paints before you buy they are very helpful 🤩

I've tried to make this stuff on my own with urea fertilizer and water with dishsoap. It comes out with some stick patterns, but it doesn't come out like this. Maybe you just gotta get the real thing. Your's looks almost 3d

@AirbrushAsylum

2 жыл бұрын

Thats awesome, shame it didn't come out as effective but thanks for sharing...appreciate the comment

@mutilation7763

Жыл бұрын

@@AirbrushAsylum Hi I hope you are very well your videos are very helpful * I have some doubts and I would like your help: 1) what type of silver in spray can you recommend that it be of very good quality and can achieve the same effect? 2) When you apply your candy red over the silver, do you put some kind of sanding sealer clear on top of that, to protect your marble effect, before applying your 2K Polyurethane final clear coat? 3) Does the silver paint have a clear coat on it before applying the crystallizer? or is it just the painting. I look forward to your prompt response you are the best thank you very much

🤔Where did you buy the crystallizer product?👍👍👍👍👍👍

@AirbrushAsylum

3 жыл бұрын

Visit dna-paints.com they ship worldwide 👍🏻

I hope you can help me,first can I get this in the uk ,also does it have to be done with a candy paint thank you

@AirbrushAsylum

3 жыл бұрын

You can get it shipped direct from the manufacturer, dna-paints.com candy is only required to change it from silver to red 👍🏻

@RicksAquariumsuk

3 жыл бұрын

@@AirbrushAsylum If I use an acrylic paint or water based red paint over the crystal will it cover the crystal effect not showing the effect meaning it will be just a red canvas