It works perfectly with all accepted euro coins. (eventhough it says currency USD on the side). I use it to count 0.5 - 0.10 - 0.20 - 0.50 - 1.00 - 2.00 coins. Converted the values in the coin accptor to 01 for 5 cents, 02 for 10 cents, 04 for 20 cents, 10 for 50 cents, 20 for 1 euro and 40 for 2 euro. The value from the serial is calculated as: value*5 = cents. to euro i did cents/100 = Euro val.

When putting the coins through for ID, it would be probably better if you sit the device on the counter, so it wont be susceptible to minor movements and accelerations that would modify the interpretation of the coin.

I love how you have a laptop which is not a Mac on display next to you. Kudos.

great video. exactly what I was looking for... have you by any chance made a video on how to use the parameters displayed on on your computer to control specific aspects of your computer such as running a program or macros

Awesome sauce!

is awesome!

Safety bolt, or locking pin for mounting would be a good way to not have it stolen, like a internal bracket or a masterlock/bolt/thingie.

The coin acceptor sends an extra even-parity bit. Instead of the more common 9600 8N1, you have to configure it to 9600 8E1 and gone are the mysterious 2nd bytes :)

Hello I have programmed the 3 coin acceptor to recognize 50 pence in uk. I have programmed it to output 1 pulse. In arduino I am using the pulsein example on pin 7 nothing works also where am I suppose to connect the counter pin? Any arduino example code for the coin accept-or please post.

can you help me how to program by accepting the coin using arduino??

We want to use one coin at a time and one signal through relay for operating the solenoid.

Awesome! I can make some really cool stuff with this...

Strangely in the datasheet it actually says it can go up to 8 but makes no mention of how.

Im looking to put this on an vivaus mini with .25 1 5 10 php denomination. Search for the rear oicture if feasible.

Hello thanks for you video, how could i use it with raspberry pi ?? any video or info ??

Hi mate, Can you please show us the wiring, explained in the clip (at the instant 2:50), wherein the GND and RX has been connected to the computer

can i get some help with the 3 coin exeptor and an arduino? im a bit of a newb

hello! can the 6 coin acceptor be programmed to reject the accepted coins? i do not have space for coin pocket and i would like to have the accepted coin returned in the "rejected pocket". is it possible?

There are six LED'S on 3 coin module , what does that mean for ? can you please explain ?

can we use two different types of coin as one in JY 926 coin acceptor ?

The one with 6 coins. DG600F how do you connect this to a USB control board for MAME? I can not find info anywhere thanks.

To wire for a zero delay joystick controller some sites will tell you to cut off the Grey wires.. DO NOT .. wire both grey wires to a 12 VDC relay power side of the relay. the white wire to ground and then connect your Joy button wires to the switch side of the relay. I have found the speed of the pulses are way to fast for some encoders. I have a 6 coin programmable and it the easiest way to slowdown the pulses because of the relay EMF collapse is slower then the pulses just enough for the Joy controller to pick up the coin drop. I hope this helps someone else..

Hey man does 100 mean 1 play? I have this coin reader on my game machine. And it's R20 per play.. so I want people to insert 4 R5 coins.. does that mean I must set the coin to 25 denomination?

Sir I'm woking on a project that uses solar power to charge laptops for students so I've decided to get an Arduino micro-controller + coin acceptor + a board of 8 relays, so I want to make sure that when a student insert a coin to the coin acceptor, the coin acceptor will send a pulse to the Arduino and the Arduino will active the relay for a certain period in order to allow the student to charge his/her laptop for that period. So how can I link/connect the coin acceptor to the Arduino such that the relay activates when someone insert a coin to the coin acceptor? Please help me, if possible give me the codes for this operation.

I really hope I could come up with a reason to get one. They are awesome!

@zachwilletts4308

6 жыл бұрын

DarkInsanePyro make a mame cab and a adapter so you can charge your friends money

Will it work with tokens? Like a game center plastic tokens?

hi how can I wire the coin aceptor to ipac2 controller ?

how can i set this up on a raspberry pi 3 please make a video on the wiring to it i wanna use this for my arcade cabinet that ises a raspberry pi 3

@joshy_j_

2 жыл бұрын

Hi, I guess this is too late, but you need a device like a Makey Makey or a Player X PCB. If you get a Player X PCB, you can plug the signal output into the "coin" slot on the pcb and it works fine.

hello can this works with others currency? thanks

How do you make this relay 240 v once a certain value is reached. In my case i want to set up a laundry and hot water supply.

Right, didn't think of that :)

Hello i know this video is old but i have problem i buy this coin acceptor and plis tell me how to connect the pc + minipac cable are strict. This is my 1 coin acceptor 4 my arcade cab ;)

Hello guys i'm looking for a similar coin acceptor but with the ability to give change, if anyone knows anything please let me know

Better yet, feed the serial into an arduino that controls solenoids on the output to direct different kinds of coins into different bins.

So if it can only be done with 1-100 will it not work for Canadian 2$ coins?

He said that in the video.

Can I use it on a raspberry pi?

Do you can configure the output for pulses? for example coin 1 = 2 pulses, coin 2 = 5 pulses

@gilbertgababonwe704

6 жыл бұрын

Did you manage to get an answer to that?

@victorgouveia1391

6 жыл бұрын

I would also like to know the answer of this. If it can I will buy 2000pcs

@yuyang8662

5 жыл бұрын

@@victorgouveia1391 Have you found what you need?Maybe you can contact me through this email address.Email：worlk@gzgarry.net. Buy coin receivers that can set pulses

@arlenehuet1678

Жыл бұрын

I need to know too how to change it to one pulse-one cent, mine is giving me 1 pulse=10 cents 🙁

What's the name of the black coin collector

Can we use it for Indian coins. How to programme it from computer?

As for the 6 coin type Acceptor DG 600 F when it does not accept a coin it just eats it annyways and drops it out the back like the rest, is there a way you can make it reject coins it does not accept?

@derkjochems1690

8 жыл бұрын

+Sohave You can reject coins it does not accept, using the dip-switch (read the manuals on the sparkfun website). I'm talking about the 6-coin acceptor dg 600 F

Hello plis help me i bild my own private Acade cab and buy coin acceptor ch923 and i dont know how connect this coin 4 pc and minipac,some claim that it needs the zener diode so as not to burn minipaca and others that do not need a zener diode and do not burn what you think of that ??

@nx_arcade_pl

6 жыл бұрын

Kris B - mam rozwiązanie twojego problemu bez diody zenera podłącz sygnał ( biały kabel ) do minipaca jako coin a z 4 pinu od licznika ( counter ) jako mase GND w minipacu i w ustawieniach minipaca sprawdź czy w coin masz ustawione na num0 jak tak zmien na 0 ( zero ) ma działać

as long as the coin fits the slot

Just assign each coin type a consecutive number and interpret it in the software.

Hi sir I try this the way you saw but still not working? Can you guide me sir ?I am here in Kuwait. I hope soon reply me

You don't sell 2different coin accepter on the website

I can't get the parallel port to work properly, it's supposed to send you a low pulse for about 100ms when it detect's a coin (on it's respective coin group pin), but the voltage of those pins ranges from 0.9v to 1.7v, and really noise on that, does anyone know how to properly use the parallel port on this coin validator?

@derkjochems1690

8 жыл бұрын

+pacsmile There should be an electrical circuit explained in one of the documentations. It's required for your purpose. I recommend a cheap arduino on the machine, with serial. Then use the arduino to forward the values any way you want. You can even let the arduino calculate total (daily etc).

@pacsmile

8 жыл бұрын

It's been a long time time sisnce i asked this already, i opted to go for coin acceptors based on the MDB protocol, rather than this pulse based.

@derkjochems1690

8 жыл бұрын

I'm using it by the Serial Port. The 6-coin thing sends serial out to my raspberry pi. I can read it. But the pulse stuff is just too low control. Parallel is not what i've tested or used.

you are supposed to put diferentes coins of the same denomination while programming

Would be nice to have a video on setting how much time the coins are buying. I have this on a clothes dryer and need to set it for 45mins for $4.00 NZD. Anyone help?

@joshy_j_

2 жыл бұрын

Hi. The computer interprets what to do with each coin. There are some coin mechanisms that can be used to provide power for a certain amount of time, or you could use a device like an arduino or another computer in order to control what to do when 4 dollars is put into the mechanism. Good luck

The 6 coin acceptor, can it accept coins with a hole in the center? some machines wont accept those.

@derkjochems1690

8 жыл бұрын

+Benny Sørensen Yes you can set the FAULT to accept coins with hole or damage (settings in the machine). 6-coin acceptor is the one you need.

you would just program it for some ridiculous value that doesn't exist and then in software deal with it. So a 83 cent coin = $2. 57 = $1. It doesn't need to be the exact value of the coin since it doesn't matter to the device. You could maybe support euros or pounds too and just use different random values.

Is it possible to interface it with a pic microcontroller ? thank you! marC:)

@joshy_j_

2 жыл бұрын

Using a makey makey or other device, and using pulse mode, you can get each coin to act as a number of button presses. 1 dollar = 1 button press, for example.

I'm seeing a piggy bank,with a display for the running total. No more counting change!!

Bonjour est-il possible de trouver une vidéo comme celle ci en français svp?

The bad thing about them is that no one has used coins for like 4-5 years now. Everything is just cards everywhere and ppl even rejecting money

Can i Anyone tell me how to run the 3coin acceptor with a raspberry pi

@derkjochems1690

8 жыл бұрын

+KrissiBT Sure dude i got it working ... what you wanna know? i have the 6-coin acceptor dg600F - add power 12vdc to the coin acceptor - add ground to the coin acceptor, and the same ground (3 way gnd -called common- to the raspberry pi gnd pin). So you have gnd like this [PI] - [CoinAcceptor] - [MainGND] - add the signal (mine is white line) to raspberry pi RXD gpio pin (P15) Put the 3th dip-switch pin to above (ON) position. Make sure your RPI is NOT printing serial to console. Now you can use Python, Xojo or another language to read serial from your PI. (baud rate default 4800 i believe mine is set to 9600)

@TheMadminecraftman

8 жыл бұрын

thanks man am gonna do it on my other arcade cabinet

can it be programed for dollar coins?

@derkjochems1690

8 жыл бұрын

+Rosco Pico It's made for USD currency, and works with euros too.

How can I adjust the time parameter on this machine for e.g. I wanna set it to $1 for half an hour

Can you use this with a raspberry pi?

@TheshBuilds

8 жыл бұрын

+Theshen Thaver ( on the 6 coin one.)

@ZeekSuds

8 жыл бұрын

why not the basic one? I'm trying to do the 3 coin with it.

@natureloopsrelaxingvideosf3214

8 жыл бұрын

+Zeek Suds Has it worked yet? I am trying to make a retropie game thing and it would be cool if it had paid mode.

Aceitas moedas brasileiras? Real?

@cesararaujo2980

3 жыл бұрын

Sim

On the side it says USD i.e. US Dollars, does it work with other currencies?

Coin vanish @ 1.12

Do we need any software for it.

Where can i buy this and what manufacturer

omg lag