The way my favorite part of this vid wasn’t even the production, it was the the final inspection and diagnostic process you did in the hanger. The fact that you _have_ to do that to make sure the plane is fully working properly makes it so much more realistic and immersive. So cool

@StootWorts

2 жыл бұрын

Thank you so much! I'm glad you enjoyed that part!

@MrTehNoms

2 жыл бұрын

Especially the little bonk the ship gets when it's craned out of the inspection hangar.

@VirtuReality360

Жыл бұрын

​@@StootWorts ik im just short of a year late, but you should add a little push ladder for the jet

@StootWorts

Жыл бұрын

@@VirtuReality360 I already have something like that!

@StootWorts

Жыл бұрын

@@VirtuReality360 I made one of those already! A ladder and stairs.

This is so absurdly extra, I love it.

@StootWorts

2 жыл бұрын

Thanks lmao

How It's Made: The F/A-70

That model is awesome by itself. But the factory producing it takes it to a whole new level. Very nice

@StootWorts

2 жыл бұрын

Thanks!!

***I was justified in being terrified to say anything, the factory has seemingly stopped working for no reason. I might try to fix it, but I also do not have the patience to troubleshoot the whole thing again right now*** I am terrified to say anything definitively but as of now it is producing fighters correctly more often than not. The main wing section seems to be the most inconsistent part of the process, and usually if that goes wrong the following sections will have issues too- but that's why there's a floor of grinders under just about everything. Just make sure to keep an eye on the final stage right before it enters the vetting room because the landing gear hatch covers, if they fail to lock, have a habit of landing on and locking onto the piston that carries the jet down and you might need to manually remove the jet from the area.

@Auto-UTTP_Report_Bot

2 жыл бұрын

Oh no!

@PledgeDefense

2 жыл бұрын

Just publish, working or not!!! 😁😁

@noxiousvex

Жыл бұрын

If you make a Publish I am sure I could try to probe at what could be causing this inconsistency. I noticed a few things that could be probable causes as I noticed there was a few moments where you sped up Pistons/hinge rotations a tad quicker then I'd recommend. Sure it slows down the process of everything, but these wobbles you get in the process can create minor inconsistencys which in a process like this 1 minor inconsistency if slightly altered could cause a catastrophe if incorrectly placed. I noticed you attempted to compensate for this, however instead of these compensations you could make the build more stable simply slowing down the speed. furthermore I love the work I have seen you put into this, and If you have any questions I am sure I can go a bit more into detail from what I have learned from working with Mech Factories.

@StootWorts

Жыл бұрын

@@noxiousvex I'd definitely appreciate the help! The main issue I'm at now is that I've updated the fighter design a lot since this video and I haven't had the patience to retool the factory to work with it yet. I'm considering just posting the factory as is so and then maybe updating it down the road if I have the patience to do so. Regardless, making the existing version more consistent would be great.

@noxiousvex

Жыл бұрын

@@StootWorts yeah that's an issue with large designs and updating the production models of each piece. It begins to cause update requirements into the factory production aswell. I've recently began a project that can do 12 different variantions of a mech design but I've had to make a couple tweaks in order to make this concept work which required heavy work into making universal model make. I'm making 2 variations, 1 with a script which is 100x more stable and fluent, and non scripted version which is slower but stable enough to garentee production.

Ayy, you've finally done it! I have no recommendations or advice to give because this is beyond anything that I could make. You have done extraordinarily, as I hope you continue to do.

@StootWorts

2 жыл бұрын

Thank you so much! I'm gonna take a break from creations like this for a while though now lmao

@pessimisticnihilist3691

2 жыл бұрын

@@StootWorts Absolutely. You should not burn yourself out to entertain complete strangers on the internet, you have a life to lead after all. Have a nice break.

@danielhardman234

Жыл бұрын

@@StootWorts ive got one for you, you can make it not suck by painting it bright pink

Goddamn looks like I need to get back into SE. I haven’t played in so long, and seeing creations like this is kindling my need for space again. Amazing work dude

@StootWorts

2 жыл бұрын

Thanks! I definitely recommend it. Just make sure if you embark on something like this that you have the time and try not to go insane lmao

@thearchitect7818

2 жыл бұрын

this is overkill if you ever play on a server use the multigrid projector plugin

Things like this really make me want to get back into building things again, but the realization that all those moving parts likely cause random moments of clang that destroys everything brings me back to reality.

@StootWorts

2 жыл бұрын

Nothing destroys itself thankfully, it just doesn't work consistently which is just as annoying.

Have you thought of adding camera's for each assembling step? Would be nice to follow the process while being in the waiting room ;)

@StootWorts

2 жыл бұрын

There are cameras, I just used spectator for the sake of the video!

@MightyAssa

2 жыл бұрын

@@StootWorts Forget what i said :P well done mate

Holy shit, The amount of time this must have taken is absolutely crazy. Great work man!

@StootWorts

2 жыл бұрын

Thanks!

@jamesmclemore9123

2 жыл бұрын

@@StootWorts seriously though, from designing the plane to finishing the factory, how long did this take?

the sheer amount of menu fiddling must've been insane

@StootWorts

Күн бұрын

Who knew angles could be so fun 🥲

The music between 1:55 and 2:06 would make a great ringtone.

Wow! That's quite the process! Well done good sir!

@StootWorts

2 жыл бұрын

Thanks!

Truly a work of art! Great job!

just honestly super incredible and love everything i saw, amazing base bro

I've never seen anything so amazing as that! I can't imagine the amount of time take to design not just the fighter but the machinery to work around that. Great work!

@StootWorts

2 жыл бұрын

Thank you so much!

i have been playing SE since it came out almost and this is the probably one of the very top most impressive things i have ever seen on a SHORT list.

Would it be possible that multiple could be built at the same time? With one fighter at each production stage?

@StootWorts

2 жыл бұрын

Possibly actually... I might need to adjust some of the timers for that to work but it shouldn't be too impossible (also make sure whoever's doing your quality assurance is standing by to make quick decisions).

Wow, all of it is just looking amazing

Amazing work, love me some automation and that factory hits all the right notes :D

Ah yes Belkan Space Magic at work

Very well done! This reminds me so much of my entry for the War Production contest. I really need to revamp my factory and add more stuff

@StootWorts

Жыл бұрын

Thank you! If you have the time, it's definitely a very rewarding task (albeit a bit insanity inducing)

wow this is just brilliant. this type of building is just one if the many reasons, i love this game so much..

This is something else. Astounding creation

god damn. this is beyond impressive. have a sub.

Setting up the timing would of been a killer brilliant job

Awesome work man

That was absolutely INSANE!!!!

Work of Art

I just stumbled across this masterpiece. I cannot express anything out of pure shock and awe my dood. HOLY HELL MAN!!!!!

wow - Great work !!!

Amazing project 10/10

@StootWorts

2 жыл бұрын

Thanks!

Wow! What a creation.

The Clang gods bow to your magnificence! I can barely get one hinge and piston to work together!

How is this even possible. Liked and subscribed

This is EPIC!

Now this is the content I want from KZread

Incredible.

wow this must be the best creation iv seen in SE

@StootWorts

2 жыл бұрын

I'm really glad you enjoyed it! Thanks!

nice work man it some to went well

@Cryooz-

2 жыл бұрын

OMFG

Wow incredible.

Simplicity is the ultimate sophistication ~ sum guy

This is incredible. I wish we could get some basic moving blocks in Empyrion. I can only imagine how much time its taken to get all this functional.

This is amazing

@StootWorts

Жыл бұрын

Thank you so much!

holy shit, my hat's off to this guy

Very nice bro

I love the ship too looks sweet

Well that's just fucking amazing!

All these factory videos I’m seeing really make me want to make one of my own. They’re not even that impractical imo because being able to fully automate something with subgrids in survival is extremely beneficial especially now with the custom turret controller being a thing. Being able to fully automate tank production would be incredibly useful and cool.

@StootWorts

Жыл бұрын

Factories do seem pretty useful for survival (I pretty much only play creative). Though, you could definitely get away with a much simpler factory for a much simpler fighter, especially if you intend to use it in survival. As cool as this one looks, I can imagine survival mode maintenance would be an absolute pain in the ass (guessing because creative mode maintenance already sucks lmao)

sehr geil kann man nicht anders sagen

You did well! now make some more!

Amazing. It would be so good if this would have an actual place in the game, gameplay wise

Masterpiece

I dont even play SE bro, I just watched this outta pure respect

These are the things people create!Cool))

Build-A-Plane We are not responsible for any maimings/AI becoming sentient and bloodthirsty/Faulty weapons/Defective Models. If you have a lawsuit to file, we wont care (but seriously this is amazing i just got the game over christmas. very excited to build my own factory of sorts this looks awesome)

Awesome!

Incredibly impressive, i can only imagine how many hours it took

Omg That is so satisfying

Great retracts! 👍 I put retracts on most my builds. I don't use mods, but those landing gear blocks are nice.

This is Peak SE creation!

@StootWorts

2 жыл бұрын

Thank you!

amazing

The factories people make are so impressive.

That's a nice one

this is incredible! would enabling share inertia tensor on the pistons make it more stable? Or are they enabled and it's just good ol' clang making it all bouncy?

@StootWorts

2 жыл бұрын

I actually hadn't thought of that, I'll give that a try when I get the chance and see if it improves the stability!

@StootWorts

2 жыл бұрын

So I gave this a try and it actually made the performance worse. I can only imagine it's because as I realized how inconsistent the physics were I took advantage of the wonkiness to make it work. Though, I might still apply it to some of the pistons that aren't involved in complicated machinery, like the ones that carry the jet from one section to the next.

@PeterMierasMjrMlfnctn

2 жыл бұрын

@@StootWorts ah dang, yeah maybe just the large grid ones? either way still an absolutely sweet factory

@StootWorts

2 жыл бұрын

@@PeterMierasMjrMlfnctn That might be a good compromise! Thank you so much!

Master builder!!!!!!!

amazing!!!!!!!!

Wow... speechless

Wild!

Wow, imagine popping out these babies every 10 minutes!

Red port green starboard. Nice attention to detail.

@StootWorts

2 жыл бұрын

Thanks! I always try to include details like that

I’m a little late to the vid but god damn.. production and inspection is amazing

Tell me you're a process engineer without telling me you're a process engineer. 😋 nice job.

"On this episode of how its made"...

When it was grabbed by the final piston, all I could think was "YOU'RE GOING TO BRAZIL"

Goddamn that's impressive

Amazing program for this to work. Impressive factories. Only thing about the craft us the gunners seat should be lower then the pilots seat and also in the front like a helicopter. Makes it easier the stay in target for a 2 seater. Space jousting

very cool way to show off a creation and i kind of wonder if it will fly with the Aerodynamic physics mod on

Jeez just imagine how many timer blocks it takes for this entire thing

I see you using AQD's emissives. :D This is a tour de force of automation -- with subgrid assembly! I counted at least 10 subgrids? I just opt for the multi-grid projection mod/plugin. :P How many PCU does your entire production line cost? :D Would sharing inertia tensors help with some of the wobbling pistons? The F/A-70 itself looks amazing for creative reasons within SE. That part totally impresses me. Your timers and angles for rotor/piston positioning are astounding to me, like a Visigoth gaping at a Roman city. Does it carry its weight in cost-effectiveness, in survival play (is that one of your objectives at all)? I have a hard time justifying my survival time spent on fiddling with sub-grids, though I continue to be enamored with sub-grid vector thrust, tanks, frictionless wheeled "hover" tanks, and PMWs. Whether PVP or PVE, a flying gun brick is hard to beat time/PCU-wise -- maybe I should spend more effort on greebling the window-dressing for a gun brick. :D

@StootWorts

2 жыл бұрын

I had no idea those mods existed, can you link it? I don't know the exact number, but I would not recommend this for survival. I mean, I never touch survival, but the amount of subgrids here took days in creative- I can't imagine what survival would be like. If you primarily play in survival, I totally agree that a solid brick is your best bet. But, since I'm usually in creative and don't have to worry about actually losing anything to damage, I like to go all out with the realistic/roleplay features. Even if you do keep the jet, this whole process could be made a lot cheaper both through the mod you mentioned or by making this facility a lot more compact (it's my first time making any kind of factory, so I left myself plenty of room because I didn't know how much I would actually need).

@dakaodo

2 жыл бұрын

​@@StootWorts Comments keep disappearing. Repost: Search Steam workshop for Multigrid projector and projector extra. Two related mods in Viktor's workshop. Also available in SE plugin manager (which is where i use them).

Super cool! Thinking about doing something smaller scale in my survival world. What are the black panels that you are using to detach the wings from their mounts when you print parts? I’ve been looking for a method to detach ship parts by grinding and re-welding the mount like you did!

Meanwhile i can essentially build a bar of soap in terms of shape that floats off into the endless space never to be seen again, or at least until i make another one more oddly shaped.

@StootWorts

2 жыл бұрын

Trust me, that is better than this mess in every way.

i wonder if its possible to apply something akin to this for small mass producible supply/drop pods whilst onboard a ship

Awesome

This game has one of the best communities ever

Damn that's a fully functional factory fr

I love

welp i need this game in my life

dude, what is he using for those using the datapad animation thats so awesome

Holy Cow, how long as it been since you were outside and saw grass? LOL. That factory is amazing!

@StootWorts

2 жыл бұрын

What's.... grass? In all seriousness, thanks! It took a lot less time than I expected it to (a few hours a day over the course of like 4-5 days).

good video +1

Holyy fu** how long did it take to make this work man? Respect,i enjoyed it

Now imagine deploying a squadron of those fighters as drones against the Space pirates.

@StootWorts

Жыл бұрын

In the lore for the fighter it does have the option for autonomous control, so implementing that in game would be fun

Now you need to automate the atmospheric frigate

HE DID A BARREL ROLL!

Looks wonderful, but during the final inspection I started wondering what mod you use for those animations.

And here's me making my box ships still ....

i can tell from the meticulous design and huge scale of your wonderful production base that YOU SIR is single with no children, lives in a basement, and doesn't have a life.

@StootWorts

2 жыл бұрын

You get one point for the "no children." I'm too young for that anyways (the design took less than a day total of in-game time and it was built over the course of about five days).

@SIDEKICKONYOUTUBE

2 жыл бұрын

@@StootWorts it is magnificent.

Holy crap that's impressive. I wouldn't even know where to begin. Is this using mods or is it all vanilla?

@StootWorts

2 жыл бұрын

The jet itself has mods but the factory is entirely vanilla

@michaelb8528

2 жыл бұрын

How do you get the parts to fuse?

I love watching space engineer stuff but have never played it. Does the jiggling of the parts cause issues for stuff like this?