Cool video, I love the scenery, hope you work out all the bugs man. really good info on the M.T.10
@matthewjackson30343 ай бұрын
Mines booked in for dyno map with Parkitt Performance (Newark), end of May. Done my Decat last weekend. Exhaust sounds beast now. Lol. Blackwidow. And bike wise, you won't get much better then an MT10. What else is there really that's as much fun.
@kyled41563 ай бұрын
Always enjoy your videos my friend! Ride safe🙏
@sergeantsodom6969
3 ай бұрын
Cheers bud, you too!
@hisaanhaq4116Ай бұрын
Been binge watching your vids, looking at possibly getting a mt10, you know about the ticking thing have you noticed it?
@sergeantsodom6969
Ай бұрын
@hisaanhaq4116 Welcome along mate! Ticking is normal, found out that the MT engines just do this 🤷♂️ been fine for over a year now 👌
@7mag3 ай бұрын
Thanks: another great vid. Would you, with hindsight, have left the stock exhaust on?
@sergeantsodom6969
3 ай бұрын
Nah, this just sounds too good 😅 even if I had the standard can on and had it mapped I'd still be getting issues with fuelling I think, and once it's been dynoed it should fix it all up!
@7mag
3 ай бұрын
@@sergeantsodom6969 Thanks; good answer!!
@benpepler57002 ай бұрын
Hi dude I'm loving my new MT 10 apart from it has similar issue to one you had, hands free and cruise control on and it drifts right did you get anywhere with yours many thanks
@sergeantsodom6969
2 ай бұрын
Turns out it looks like it was the exhaust/cat 😁 remove the cat and nowhere near aa bad
@benpepler5700
2 ай бұрын
@@sergeantsodom6969 thanks that's great I wondered if there was more weight on that side at some point I'll try decat many thanks for the quick reply cheers bud
@MrWolf22123 ай бұрын
The MT10 is not perfect, but I guess thats to be expected since its cheaper from the competition.
@stesh1013 ай бұрын
Did u get the bike sorted? Spoke to andy at J33 yesterday about mapping my 23 bike.
@sergeantsodom6969
3 ай бұрын
Off down on Thursday 👍
@stesh101
3 ай бұрын
@@sergeantsodom6969 ideal, let us know how it goes 👍
@lukataggert86163 ай бұрын
What did you mean when you turned the bike off and on back again saying it was “doing its thing where it doesn’t coast properly”?
@sergeantsodom6969
3 ай бұрын
I explain this a little more later on in the video, however due to the mapping of the bike, there is sometimes an issue where the engine cut off/decell cut doesn't seem to register when letting off the throttle, the bike acts as if it's still being fed fuel I.e. partial throttle, when there is no throttle. So essentially no throttle, yet still being driven forward. Not something you'd expect on a standard bike 👍
@lukataggert8616
3 ай бұрын
@@sergeantsodom6969 I actually watched the whole video just wasn't sure if that was referencing the same problem, thanks for explaining! It's very strange for something like that to happen with a map from junction33 especially. Never heard of it before. Makes me reconsider getting a link pipe and just saying stuff it and throwing on a shorty slip on haha
@sergeantsodom6969
3 ай бұрын
@lukataggert8616 Yeah it's weird, unfortunately these bikes and their euro 5 bollocks have caused a lot of problems for tuners Might be worth a shot!
@lukataggert8616
3 ай бұрын
@@sergeantsodom6969 yeah it’s hard to say, the decat sounds fantastic but the whole mapping process being mandatory makes it a bit of a hassle… decisions…
Пікірлер: 21
Cool video, I love the scenery, hope you work out all the bugs man. really good info on the M.T.10
Mines booked in for dyno map with Parkitt Performance (Newark), end of May. Done my Decat last weekend. Exhaust sounds beast now. Lol. Blackwidow. And bike wise, you won't get much better then an MT10. What else is there really that's as much fun.
Always enjoy your videos my friend! Ride safe🙏
@sergeantsodom6969
3 ай бұрын
Cheers bud, you too!
Been binge watching your vids, looking at possibly getting a mt10, you know about the ticking thing have you noticed it?
@sergeantsodom6969
Ай бұрын
@hisaanhaq4116 Welcome along mate! Ticking is normal, found out that the MT engines just do this 🤷♂️ been fine for over a year now 👌
Thanks: another great vid. Would you, with hindsight, have left the stock exhaust on?
@sergeantsodom6969
3 ай бұрын
Nah, this just sounds too good 😅 even if I had the standard can on and had it mapped I'd still be getting issues with fuelling I think, and once it's been dynoed it should fix it all up!
@7mag
3 ай бұрын
@@sergeantsodom6969 Thanks; good answer!!
Hi dude I'm loving my new MT 10 apart from it has similar issue to one you had, hands free and cruise control on and it drifts right did you get anywhere with yours many thanks
@sergeantsodom6969
2 ай бұрын
Turns out it looks like it was the exhaust/cat 😁 remove the cat and nowhere near aa bad
@benpepler5700
2 ай бұрын
@@sergeantsodom6969 thanks that's great I wondered if there was more weight on that side at some point I'll try decat many thanks for the quick reply cheers bud
The MT10 is not perfect, but I guess thats to be expected since its cheaper from the competition.
Did u get the bike sorted? Spoke to andy at J33 yesterday about mapping my 23 bike.
@sergeantsodom6969
3 ай бұрын
Off down on Thursday 👍
@stesh101
3 ай бұрын
@@sergeantsodom6969 ideal, let us know how it goes 👍
What did you mean when you turned the bike off and on back again saying it was “doing its thing where it doesn’t coast properly”?
@sergeantsodom6969
3 ай бұрын
I explain this a little more later on in the video, however due to the mapping of the bike, there is sometimes an issue where the engine cut off/decell cut doesn't seem to register when letting off the throttle, the bike acts as if it's still being fed fuel I.e. partial throttle, when there is no throttle. So essentially no throttle, yet still being driven forward. Not something you'd expect on a standard bike 👍
@lukataggert8616
3 ай бұрын
@@sergeantsodom6969 I actually watched the whole video just wasn't sure if that was referencing the same problem, thanks for explaining! It's very strange for something like that to happen with a map from junction33 especially. Never heard of it before. Makes me reconsider getting a link pipe and just saying stuff it and throwing on a shorty slip on haha
@sergeantsodom6969
3 ай бұрын
@lukataggert8616 Yeah it's weird, unfortunately these bikes and their euro 5 bollocks have caused a lot of problems for tuners Might be worth a shot!
@lukataggert8616
3 ай бұрын
@@sergeantsodom6969 yeah it’s hard to say, the decat sounds fantastic but the whole mapping process being mandatory makes it a bit of a hassle… decisions…