Some much needed repairs on the ELGRAND! - Initial b
Автокөліктер мен көлік құралдары
The wheel bearing was so noisy and so far gone that the rear sliding door caught the wheel.
I do love the Nissan elgrand for the family though and so far working on it has been a doddle
So just a quick video to show how easy it is.
Пікірлер: 35
great video, and really appreciate that you still reply to people after all this time! one Question though, it kinda looked like you still had the lower arms attached? I'm struggling to even get an offset spanner into the bolts, let alone a socket because the axle bulb is in the way.. is that just an angle thing on the vid? do you trhink you would have taken the lower arms off to swing out the hub?
@InitialB
4 күн бұрын
Cheers man. I’m actually disappointed in myself on how I could have shown more. But this was early days. But, no I left the arms attached. What you see in the video is all I did. I think the socket I had is quite a thin walled socket .
Wow it's the flash !
@InitialB
2 жыл бұрын
You what?
@alannewbold3335
2 жыл бұрын
@@InitialB your a super hero 😁
@alannewbold3335
2 жыл бұрын
I could have said Benny Hill lol
@InitialB
2 жыл бұрын
Hmm yes. I should think myself lucky lol
@alannewbold3335
2 жыл бұрын
@@InitialB Indeed
Hi mate great job!Just a quick question as i couldn't see in the video...What size socket did u use to take the bolt of from the wheel bearing hub? And was a deep socket?I am struggling to find the socket size cheers.
@InitialB
3 ай бұрын
On the rear? It will have been a 14mm. I had various extensions so I could put the socket in a decent place, but the socket wasn’t deep.
Just wondering if Is there any issues when u take the rotor out? Scared its not comming out
@InitialB
2 жыл бұрын
The brake disc rotor? Nah just remember to take the handbrake off with the vehicle chocked and on stands and it came off fine.
Hi, your part is not for Elgrand. You bought the Nissan OEM :43202-CA000 for E51. Is it all good?
@InitialB
Жыл бұрын
Yeah worked perfectly mate. I’m not sure about why that number shows something else though
I have the e50 Elgrand. And I love the dam thing. Great cars. But total bastard to get parts for in Australia. And I've had to replace a few things on it now. Lol Good work though. Look Fawad to swing more.
@dans7759
3 ай бұрын
Not many E50's around. Heaps of parts for the E51, including pads and rotors off the shelf at most parts stores including supercheap.
I finally got me a white E51 series 3 😂
@InitialB
4 ай бұрын
Enjoy man!
Hello mate. Do you remember what size socket for the axle nut.
@InitialB
15 күн бұрын
Sorry I don’t, Will be a 27,28 or 32. I know that’s not much help though sorry.
@LordDaveKoresh
4 күн бұрын
32mm for the E51 rear, need a deep one, but didnt need Extra deep. Going through it myself right now! seen a few methods for locking the axle in place while you turn it, but for me, putting the disc back on, then the caliper and using a screwdriver in the middle of the disc helped a lot..
Can you fit 350z Brembo calipers to the Elgrand?
@InitialB
Жыл бұрын
I’ve heard it’s the 370z calipers that fit. I couldn’t say about the 350 sorry
@TheKingBasley
Жыл бұрын
@@InitialB Okay, thank you for responding and your help 👍🏼
@madbadger6255
10 ай бұрын
I believe they need some modification to fit.
Those hub bolts should definately of had thread lock on them.
@InitialB
2 жыл бұрын
Oh really , they didn’t when I removed them. Maybe it wasn’t it’s first set
@stouty6784
2 жыл бұрын
@@InitialB I'm a mechanic and would never change a hub assembly without using Blue lock thread when reinstalling, don't worry to much about torque specs on that setup just FT them all :) it's either had a hub before and they never used LT or the OEM bolts sometime have a clear coating LT applied thinly that isn't that noticable, I'm surprised you never got new bolts also with the hub kit?
would u have a picture of the fuse boxes covers in english ..mine is only japanese...thanks
@InitialB
6 ай бұрын
I downloaded Google translate app. Then use the camera mode and it’ll translate everything for you
@davidspencer9811
6 ай бұрын
Thanks i will try this
Dude we having problems with the elgrand after putting the wrong fuel in... Give me some free advise man
@InitialB
2 жыл бұрын
Ah man, that’s rough, really though if you get your tank drained, and lines cleared you should be able to reset the ecu by unplugging it for 30 min and then try again